Show off your setup or get inspired by others
Recently active
Can we use 4 Sonance in Celling Speaker with 1 Sonos AMP ?? And how many watts is the in celling speaker ??
With the Port currently not available until late 2021 as a workaround, I am attempting to use the Connect (Gen 2) to stream music on an existing amplifier and speakers. I have found a used one on Ebay. Before purchasing, I want to know if this is still feasible.
So looking for a solution for an outdoor speaker on a summer house in the garden.Have seen Sonos do fixed outdoor speakers but they are out of my price range.I was wondering if a Roam would work?If I could mount it on the wall and keep it plugged in would that work?
Has anyone noticed the Move sounding different/less robust when connected via Bluetooth vs WiFi to the same audio source? I understand the technologies transfer audio differently, but are they both lossless? Is there an audio source setting that can be adjusted to make the transfer more similar? Thanks,Mike
When will these be available to purchase. Been trying to order for over 6 months
I just received the Roam and am starting to use it. When I’m on wifi, it works great. The minute I go off wifi onto 5G, the app is completely useless. The music that I’m listening to still plays, but I can’t do anything else via the Sonos App. This seems like a pretty big limitation considering that most people will probably be using the speaker on the go (beach, boat, park, etc). So when you’re away, it’s really just another portable speaker. I’m assuming most people will start to discover this and wonder why, as Sonos didn't really mention that this would happen.
Hi all, Currently we have three pairs of SONOS Play:1’s and we have the issue that the music stops a couple of times a day. However, we don’t see any interruptions in network traffic or latency drops.Those speakers are connected over Wi-Fi into the ‘SONOS’ vLAN.To be complete: we are a midsized company (120 employees) with a substantial IT infrastructure: firewalls, vlans, routers, switches, servers etc… Currently we have a ‘SONOS’ vLAN that has no restrictions outbound.Since this is failing that much, we would like to replace the lot and -whilest we’re at it- extend the installation to a couple of the floors/rooms that aren’t covered for now (only the workshop is covered now). This would probably need about 15 speakers.We don’t want to buy 15 SONOS sets (whether it’s a ONE or ONE SL or standard speakers connected to an AMP) without being 99.99% sure that this will work.Please share your experiences in ‘big’ environments.Any thoughts or suggestions?(My experience: my home infrastructur
Okay, the title is quite a handful, but I couldn’t come up with a simpler one (suggestions welcome) so bear with me.This is a summary of what I learnt to fix my problem based on these other topics which are quite a mess to read through:and many more...In this post I hope to help out all the people that were using an iTunes network library, either from a computer or on a server to play music on their sonos systems. Specifically I’ll focus on the usability, since I was used to just copying their iTunes folder on to my NAS and have it work perfectly as a NAS music Library with Sonos and how to get it to work with the new updated Music App, that replaced iTunes. This might also be helpful for people with playlist issues or general issues on getting their new OSX Music Library to work with Sonos.General Information: Since Apple decided to replace iTunes with Music, it no longer creates an XML file for the library. This is an issue because it’s exactly that file that we need to have your NAS
What is a good replacement for Sonos. Since they no longer support my devices such as a Connect:Amp I need to replace it. And I'll be damn if I give another penny to Sonos so they can drop support on it later.My Connect:Amp devices disappeared after installing the S1 app.Dale
Hello, I cannot seem to find any information regarding the topology of an ARC, AMP & SUB configuration. I am building a room for an ARC, an AMP and (1) Sub. I’m not clear how Sonos connects the amp when utilized as a surround device. In short, can I have the ARC and SUB in the room with the connected display and the AMP located in a network closet wired both to the ceiling speakers and connected to the network via CAT6. I’m not clear if SONOS joins them as a network device or a wireless device, in which case I presume there are proximity/distance limitations to the AMP from the ARC. Any information would be lovely. Best // Cortez
IOS has Sonopad... Android has.... nothing. Am I alone in finding the S2 app clunky and outdated - it works but that's about all that's going for it. I especially hate the colour-themed playing screen which can easily provide a sickly yellow background depending on the album art or station logo.
I have a client who has been using the Playbar (connected to their TV via optical) and a Sonos ConnectAmp (side cabinet with no direct connection) that is connected to 2 wired speakers.Currently they are using the Sonos app to connect the “connection” between the 2 of them and playing TV audio streaming, but there’s a delay and it disconnects a lot.My question: With the network connection ports, is there a way to connect the Playbar directly/wired to the ConnectAmp and have them stream/sync together and allow for the TV volume to control the audio on all of them at once? They don’t want to be stuck to the app constantly just for volume control and it disconnecting.
I have a protected under deck patio. Absolutely no rain on it, but it is outdoors. Looking at putting a pair of Sonos 1 under there. I wonder if anyone had experience with leaving Sonos one speakers outdoors, but not in the weather/rain? I know I can buy outdoor speakers and an amplifier, but add $1000 that’s too much.
I’ve just purchased a Roam. Great sound. Unfortunately, it tells me battery is low and to charge with an audible noise, at whatever time day or night! How do I turn this feature OFF please? Thanks
Apologies if this has been covered before Recently bought a LG TV (65NANO75) Running the new LG WEB OS 6.0 software , and have linked up my soundbar via a optical cable and have two Sonos play ones as rear speakers and it works well , in fact even better than when linked to my 2009 Samsung TV My problem is i can’t get the LG remote control to work the volume control , lots of advice and videos on how to do this online but the screens i see are nothing like the screens and that is because of the new version of the software LG have introducedI can still adjust the volume using the Samsung remote My question is can someone advise on how to get the LG remote to work the volume Yes its a first world problem but its niggling me
Hi, when the Sub is connected to AMP you're able to adjust the cross over frequency which is great if you have full range speakers.I've got mine in an Arc and in ceiling rear speaker surround system however when the Sub is in a surround system, you lose the feature. I'm assuming this is down to pairing with the Arc which creates a fixed cross over and generally optimising for surround. However if you're playing music you're stuck with this cross over.My suggestion is to add a crossover adjustment feature for the Sub that operates only when music is being played. This would be similar to how you can adjust how much the rear speakers play music when compared to the Arc. Any chances of that being implemented?
I would like for sonos to add the ability to add more play 5 or Sonos one speakers to Arc. My idea would be to add two more speakers as ceiling speakers that fire down and the sonos arc can be a center channel and perhaps two side firing speakers? I would have two rear speakers two ceiling mounted speakers the sonos arc as the center speaker and perhaps the up firing speakers can be re purposed as front left and right or side firing speakers? And two subs. Would be the best wireless dolby atmos setup.
I have a set of mission lx-2 + speakers which are 6 ohm speakers with a minimum impedance of 3.5 ohms and a recommended amp power of 20 - 120 w. Also I have a pair of outdoor polk audio speakers that are 8 ohm. I would like to connect them with my sonos amp using a speaker switch which is a monoprice switch. I can’t seem to get a clear answer from sonos or the folks at mission speakers so I thought I would ask the sonos community. First of all are my mission speakers a good match for the sonos amp and secondly is it ok to use a speaker switch with this set up (it’s very unlikely I would run both sets of speakers at the same time)
Just wondering if anyone had a Arc and two Ones that they use for both TV and a Vinyl setup. If you do, do you mind sharing what I need to start listening to vinyl with my speakers. Currently I have the three speakers mentioned for my AV setup and no more.Thanks in advance.
Current status. JBL Studio series bookshelf, and center, Sony amp , pro-ject turntable and a average pioneer receiver in a large bonus room this room is used for music and tv watching, very casual. I have a tv in living room with a sound bar /sub that is easily overwhelmed by the rooms large awkward size. 5 sonos ones scattered around house on to the my question. We are planning on downsizing and I won’t have a dedicated room for tv/music, the new area for tv/music will be a great room with living,kitchen and dining in one large area. I want good sounding music and tv that I don’t have to keep asking wife “what’d they say?”options seem to be :A) Non-sonos sound bar (of quality that can handle room size) + sonos amp + current bookshelf speakers+ sonos sub with current Ones for musicB) Non-sonos sound bar + sonos amp +sonos sub +2 fives for music+leave ones scattered around houseC) sonos arc+sonos amp+ Sonos sub+ keep current bookshelf for music and ones scattered around houseOrany
Hello Everyone!To get to the point from the title. Sonos Trueplay for a 5.1 surround can only be tuned using an IOS device. As a programmer I can understand because of the hardware differences between different Android phones.I own a Sonos move, so why can't the built in Mics for that unit tune my Tv room surround? The Move would just simply be used as a external Mic to pick up sounds around the room( might be a little too heavy moving the speaker up and down haha) or would Sonos be able to create a Microphone as a accessory purchase.Don
Hello, Am I able to set up surround sound with 1 sonos One (2nd Gen) and the Sonos beam? Or will we need to purchase another Sonos One speaker? Any advice is welcome! J :)
I’ve been using the Amp for months with Wharfedale Diamond 8.2 and 9.2, both 6 Ohms speakers (each as 2.1 setup, not together).I just upgraded to a pair of Wharfedale EVO 4.1’s and they sound great with the Amp. However, they are 4 Ohms.Is the Amp comfortable with a pair of 4 Ohms?
I have a Play 5 in my office, thought I’d move my Play 1 (1st gen) into my office and pair them…. Support’s solution was to play them together, which sounds pretty good but not really what I, looking for. Can I get a suggestion on which speaker(s) would be best to pair up with the existing Pair 5 for “optimum Sonos sound” The space is a home office, 12’ X14’
HiI really like your architectural speaker pair. That mounting option is precisely what we are looking for. However, I’m not sure that we need to have a pair. Are these only available as a pair?Best wishesEdwin
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.