Show off your setup or get inspired by others
Recently active
Wifi operator shanged and now the device can not be plugged back to system?What can I Do to connect?
Hi Sonos team,This has been requested before, but after extensive reading in the fora I could not find a solution or an answer from Sonos about prioritisation of this issue.Can you please provide an option to disable audio-delay (latency) when a line-in device is used on a single Sonos speaker setup?In an older conversation all kind of ideas were proposed by the community. There were a couple of things people agreed on:Many people are bothered that a minimal 75 ms latency is enforced. And they would be very happy if Sonos could give an option to disable the 70ms latency. Two use-cases where people encounter the latency-problem: Creative music production (keyboard, dj-mixer) Audio video where the Sonos is used for audio and a laptop/television as screen (for movie watching or video calls). In a setup with 1 Sonos speaker and a line-in device as audio-source, the 70ms latency seems artificial and not dictated by technical limitations (i.e. buffering with multiple wireless Sonos speaker
My ‘Sonos 1’ app has stopped accessing my Synology DiskStation music folder after the recent DSM 7.0 update. It seems many others have had the same problems and one way around this is to enable NTLMv1 authentication in: ‘Files Services - SMB - Advanced Settings - Others’ on my Synology NAS. The only problem with doing that is that it increases significantly the risk of external attacks! Can someone please tell me how I can avoid this critical issue, or if there will be a fix in the near future from Sonos on the Sonos1 app? I cannot use the Sonos 2 app because I have several units in the house which are not compatible. Thanks in advance
Hi so I am wanting to set up smart speakers throughout the house for music and additionally add a turntable to the system. I would also like to get a sound bar for the tv. I would like to know if this concept will work. I was looking to get the beam and turntable set. I would set the beam to the tv and put the turntable in one room. I would use the five speaker (that comes with turntable set) in another room. Will the sound bar be able to connect to the turntable? Will I be able to play records to both rooms? Will the tv be able to play in both rooms? Thanks
I’m trying to figure out what adapter to use for hooking up my PlayBar that’s only optical to the USB port on my TV, any suggestions? Thanks
We just bought a house. We have an arc, move and multiple ones through the house that work great with the sonos app (I use apple music through the app to play music). We have an outdoor area that has mulitple speakers that came with the house and a receiver that’s super old (no blue tooth, etc). We can turn on the reciever and play radio stations through the outdoor speakers, they work! :-) If we want to leverage the existing outdoor speakers - can we buy a sonos reciever - Port or Amp? and use that to connect the non-sonos speakers? The receiver today is outdoors under a tiki roof -- not protected super well from elements. if we spend the money for the port or amp - will it allow to control/coordiante all speakers/sound? Is there a cheaper option to accomplish full connection with a unit that is less expensive since it will be outside? Thanks!!!!
Hi,I’m new to the Sonos game and have a question about the Sonos AMP.I currently have:pair of Sonos Ones TV with an HDMI-ARC port Turntable connected to a kenwood amplifier with line out pair of 8ohm passive speakersWhat I would like to do is use a Sonos AMP to:connect TV to HDMI-ARC port connect passive 8ohm speakers to sonos amp to be used as FRONT surround speakers use pair of sonos ones to be REAR surround speakers connect line out from turntable to line in on sonos amp maybe add a 3rd party powered sub to the sonos amp later still be able to use airplay 2 to send music to the sonos systemDo you have confirmation that this configuration will work? Can it all stay in surround mode (with the sonos amp as the FRONT speakers and sonos ones as the rear surround speakers)? Will I be able to switch between TV HDMI-ARC connection and sonos amp line in connection either by auto detection or through the sonos app? Thanks for your help! Rock on!
I have a fair number of Sonos speakers throughout my house which can be thought of in 4 zones: upstairs, downstairs, garage, and patio. There is rarely, if ever, a case when I want all speakers on at the same time, so I would like to disable the ‘Everywhere’ default speaker group and only use my own. Is that possible?
I finish builded beam gen2 + sub gen3+ pair of One SL system before this Chrismas for my home theater. This system works great and i really love it. I really love listen music with this system, and it makes me want to sing. I expect that my own voice comes out from sonos sound system. to enchance this home theater system to a karaoke system too.I made my research and there are some difficults,first of all, Most of smart TVs Can install Karaoke apps and bluetooth connection,but Microphone can not be just connect and use. second, sonos system need HDMI eARC for dolby atmos, ,and most TV can not output 2 audio at same time, and Beam and Arc dont have extra port for connection.Third, most of the mixer on the market dont have HDMI eARC pass through or the whole setup become a nightmare of cables.I hope sonos can make a mixer with dolby atmos pass through to enchance the connection of sonos system plus a pair of karaoke microphone. with its nice design and wifi system intergrated.Maybe this
Hi , i have Sonos speakers throughout the house1 x playbar, 1 x beam, 3 x play 3, 2 x play 1I am looking to purchase hifi separates ie a CD player and possible amp to play the cds through the Sonos speakersMy question is what do i need to do this1/ CD player, Sonos amp2/ CD player, amplifier, Sonos port
CONECTO en Salon: Barra de sonido beam (2ª gen.) + sonido envolvente con creado con 2 Sonos One.Podría utilizar para reproducir musica sólo los 2 Sonos One, como par stéreo, sin utilizar la Barra de sonido beam?gracias
This might be a stupid question, but I am pretty new to all of this. I have a Sonos beam with the woofer and two Sonos ones in a basement set up. Is there any way that I can create a room for just the one speaker that is back by the bar area? Ideally I would like to play music on that after the kids have gone to bed and not have the whole surroundsound system blasting music and keeping them all up. Or is that speaker permanently tied to the basement set up that I currently have and that is all I can do with it? thanks!!
Building a new house and need recommendation on how to set up and wire the house: Requirements: Have four zones Kitchen Living Room Patio Den / Bonus Room Using Siri and Apple devices (iPhone, HomePod voice commands, etc) to play music in select zones “Hey Siri, play 90s Alternative in Living Room” “in all rooms” Control the volume of the music from Siri and Apple devices for the zones. The Living Room will have a TV with Apple TV. Need an option to play audio from Living Room TV to the Zones (at least to living room zone) The Den zone will also have a TV for movie watching. Would like 5.1 audio in that space that can play audio from TV (movies) and also receive music through the rest of the system (Siri, Apple music, etc.) Wiring Kitchen - two ceiling speakers Living Room Two (or four?) ceiling speakers, Conduit from the fireplace (TV mounted over the fireplace) to built-ins Tube from built-in to media rack (basement) Pati
Hi everyone, hope I’m posting in the right place.I have a Beam in my living room, I use it as a regular playbar for TV, shows, movies and so on, but also for listening to the music.In this latter task, it’s not bad for its size and features, but it is not satisfactory for me, especially in the bass realm.I know the simplest thing woud be to add a Sub, but I’m not that enthusiastic. The room is not very big, I care about my relationship with neighbours and… well, it does cost a lot. I can’t but think “Is it worth it?” (please note: for me… personal thoughts and tastes!) So I visited the shop where I purchased the Beam, and the owner kindly allowed me to make some tests:Single Sonos One Beam Couple Ones Beam + Couple Ones Options #2, #3, #4 with Sub Play 5My original idea was to get 2x Ones (SL) and group them with the Beam, hoping they would provide more depth and improve the situation. I think a couple Ones is actually better for music than the Beam, but I wouldn’t call this a game cha
Does anyone know of a headphone amplifier that can decode bitstream audio?The ones i have tried don't decode it and output the just digital noise. TV won't allow the use of PCM via optical while sending bitstream 5.1 to the beam. Tried using audio extractor and that didn't work either.
Hi All,I have an intermittent issue where when I switch on or Samsung TV (after it’s been on standby) there will be no sound coming out of the beam. I then must select another source/input on the tv and then switch it back and then the sound will kick back in.I have had this issue for ages and is a bit of pain and wondered if anyone has had the same or knows how to fix it?
just set up the Sonos 5 speaker. Our existing turntable and Optimus amp work just fine on our old speaker. We wanted to upgrade to the Sonos 5… but when hooked up, there is a terrible low hum that gets louder with volume increase and is persistent when the record is finished or in-between songs when there is no sound. the grounding wire is fine and like I say, does NOT have the buzz with the older speakers. So what are we doing wrong? Or is our system no compatible with the Sonos 5? We do NOT get the buzz with any of the other features, meaning the streaming music, etc. Only when using the record player. If we can’t fix I guess we just go back to the old speakers because that hum is giving us a headache.
Several months back there was an announcement that Arc would be able to play Atmos Music streamed from Amazon and maybe Apple? Latest 13.3.3 firmware update still doesn't provide this capability as far as I can tell. Anyone seen or heard anything new on this subject?
I’ve just purchased a port (upgrade to a connect) 3 weeks ago. Upgraded to S2. So I now have an S2 system with the port and S1 system with the connect. I continue to find the sound from the connect to be clearer than the port using Qubuz? I would have thought the port, with its improved operating system would have added more clarity, separation, etc.. Any thoughts? thanks..
I listen to BBC Radio 4 every morning on my Sonos system. It's my alarm clock.This morning there is a short audio insert just before each hour telling me that the service will be stopping on March 22nd 2021 and that I should contact my service provider to ask them how I can continue to access the BBC content.I'm not in the UK, so the TuneIn service is still available (until now). What are the options for me to still receive my daily dose of British content over my Sonos system?iPhone related options are not applicable in this house.
Hi, I have an XGIMI projector which we use every Friday night and store in between uses. At present we just bluetooth the audio to a portable speaker. It works well but I was going to upgrade to a move or a roam. When I cast via bluetooth to can I thriough that connect it to all the speakers I have in the room - a couple of play ones and and a sonos 5. If i can I might get the roam. Thank you David
HelloI want to buy a record player for my partner to connect with his sonos one speaker and soundbar. I am looking to buy the Pro-Ject T1 Phono SB Turntable. Do I need to purchase just the sonos port or do I need an amp as well to connect the record player to the speakers.I was going to buy the Pro ject T1 sonos edition turntable which I believe you only need a sonos port for it to work, however they have sold out. So now a little confused as to what I need exactly for the turntable non sonos editition.Thankyou for any advice..
As a record and turntable enthusiast, it would be nice to have the Sonos app detect a record is playing and automatically populate the app with the track listing and times. I know, I know, I can walk over and read the record, but we’re talking cool internetty tricks, right? This would be one of those. Thanks, Joe
Just set up Beam 2nd Gen. Sound is poor when watching TV via Sky. However, sound is great when streaming - Netflix etc., and when listening to music services. Sony TV, Sky+ box. I’d appreciate any thoughts as to possible fix. TIA.
As reported in many other topics apparently it's still necessary to use SMB1 for playing music from a Synology Diskstation system? It's now 2021 and I just had to change the settings on my diskstation to allow the unsecure SMB1 in order to be able to add a shared folder to my Sonos music library.Sonos seems to be closing all topics on this forum about this subject for further comments, but is not addressing the problem?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.