Spaces & Setups

Krull och kriminell finns på Spotify med många pod avsnitt.Sonos får jag bara fram en live sändning. skulle önska att sök funktionen var mer snarlik den i Spotify  då den inte är lika  känslig för felstavning.    

Among all the units I have, I have two PlayBars. They're good, but I find there isn't much stereo image. I think this is purely because the L and R speaker sets are close together.My suggestion is that for this product and any stereo pair you have an option to enhance the stereo.This can easily be done in DSP by matrixing to L+R and L-R, increasing the gain of the L-R, then matrixing back to L and R.Maybe an option in the app - ideally with an ‘amount’ setting which would control the amount of extra gain applied in DSP to the L-R.There are cleverer ways of enhancing stereo, like only amplifying the L-R when there’s a peak, but I think for most situations, the simple approach would work well.Then we could 'widen' the stereo image. 

I find I want to control the Sonos sub independently from the other products forbetter sound control of the system. Is there a way to do this without connecting the sub to another product?  I have connected it to the arc and the surround sound 1 SLspeakers, but its a bit of a pain to have to go back and adjust the sub continually  after you adjust the room volume that the sub is connected to. (Im in an apartment, and need to keep the sub on a low setting most of the time. But going back and forth between the room volume and sub volume seems so unnecessary and easily resolved if they allowed this feature). 

Is there a way to conect the Viviant door camera to the sonos speakers and use them as a door bell. Their system does not connect to the doorbell. So being a wireless system I wanted to know if you thought of connecting your product to viviant or if you would think about working on that project. Thanks for all the years of great sounds… Keep up the good work!JW

Hi, i have new sonos arc (replaced old sonos soundbar).Im not able connect it throught HDMI ARC with LG60UH8507. Diagnostic number 1316800750, i have tried almost everything to solve it. Please help. Atmos was the reason for new sonos arc.Thanks for help, Michal.  

I was wondering how I connect my projector to my arc? Unfortunately I do not have hdmi arc or optical digital out port. Attached is a photo of the back of my projector. Hdmi 1 has my Apple TV connected to it.  

I had a Yamaha receiver and a Connect hooked up to a set of 12 ceiling speakers (6 pair upstairs and downstairs). Unfortunately, they were all wired into 1 total set so I have 4 wires total that can only run the whole system at once (but I have individual volume controls in each room). I want to get rid of this and upgrade to S2 with 1 Amp-still would all just run the whole system. Will the Amp be able to handle that? Also, they were unplugged when they did the install so I don’t know what is L/R & Red/Black or how they are configured, I just know I have 4 wires total. Can I just experiment without destroying the Amp. No way for me to figure which is which, not even sure how it’s all wired.

Took delivery of a new TV today and hooked everything up. Sound fine BUT when watching the football with crowd noise the audio dropped intermittently throughout. Changing to the no crowd noise channel, audio perfect. The Beam is connected via HDMI Arc.  Sound set to pass through and the E-Arc on or off didn’t appear to make any difference. Any suggestions?  FWIW connected via HDMI3. Almost like too much happening was overwhelming the speaker. Connected to two Play1 for surround. Any help appreciated - I’m not particularly experienced in the audio settings so have read several threads before appealing!

HiOn software 12.2.4 the latest and none of my speakers will allow me to adjust volume limit, it allows me to slide to slider down or up but just defaults to 100 as soon as I release my finger off screen!Has anyone else encountered same problem?This is on Arc set up, beam set up and playbase set up on both my iPhone and iPad  TIA    

Hi all. Followed the other instructions and threads to get the magic remote working with my optically connected playbar. It works for the volume switches but not the mute button.  any ideas?

Just downloaded the s2 app, starting it, tells me that i need an update ‘Sonos found on this netwerk, update your system...’When i hit update i have to login. After login, nothing happens… no update, no error, no message, nothing. I cannot get past this point, it keeps asking me to update and then to login…Unplugging my play:1's and playbar doesn't helpSee also s2-setup-issue-6845804 

Hi there,I have an Arc and a Sub in my cart, but given my 2008 Panasonic plasma only supports PCM/Dolby Digital via fibre optic digital out, I’m wondering if it will pass the Switch’s LPCM to the Arc or not.As I understand it, PCM and LPCM are the same, but I’m still a bit concerned the TV will only pass stereo to the Arc, and I’m not sure I want the added complexity and expense of one of these HDFury deals.Very much appreciate any insight or replies.

Hello,the power supply to the Sonos Port is 12 V, 1 A. What is the dimension of the DC plug into the Sonos Port. Is it 5.5/2.1 mm or is it 5.5/2.5 mm (outer/inner diameter)?

I have just installed a Sonos Arc.  No matter what I do, I can’t get Atmos playing (the Atmos flag in the Sonos app never appears, and the sound is definitely 5.1) My set up:  Sony XBR55 x900H (latest firmware) with eARC.  This TV supports Atmos.High Speed (w/ethernet) cable going to Sonos Arc.Arc paired with Gen2 subwoofer and 2 Sonos OnesSonos S2 app updated. Content tried:Netflix movies (w/Premium Account)Disney+ movies and shows Blu Ray discs  As noted, I have played tons of stuff, but nothing triggers the Atmos flag (as shown in Ryan’s Arc tutorial).   Any thoughts/suggestions/things to try will be appreciated. Thanks in advance!    

My Sonos system is connected fine through my PC and Samsung phone but suddenly my iPad IOS 14  app is no longer able to find my Sonos system. I’ve activated the Sonos system through my iPad system settings. I’ve rebooted the router three times. I’ve rebooted the iPad 3 times and reinstalled the iPad 3 times. I’ve tried connecting the router to a speaker with an Ethernet cable and still it cannot find my Sonos system. The system continues to work through my PC and Samsung phone. It has been working fine and I have made no changes to the system. All other wireless devices working fine.

Ho due case, una dove ci vivo e un’altra in campagna con più sistemi sonos si può  usare lo stesso login in due case separate?

I purchased a new 2020 Samsung 80T 65 inch tv and attached my Sonus Arc soundbar via an HDMI cable to the e-Arc HDMI connection on the TV.  No matter what setting I have tried and even after updating the firmware on the Samsung TV and the Sonus Arc soundbar, I still have the sound either cutting out every 10 sec to the TV switching between TV sound and the Sonus Arc Soundbar.Does anyone at Sonus know if this is a Samsung issue or a Sonus Arc issue?  I have seen other posts stating that Sonus is working with Samsung on the issue.  Does anyone have an update?  New firmware coming?  Any date?

Hi every body, I connected my sonos soundbar Sonos Arc to my samsung qled 65q95t TV (with the cable supplied by sonos) on the HDMI-ARC port. But I have sound cutoff problems, and even sometimes permanent sound cutoff! I have to unplug my soundbar or reinistialized the settings. My firmware under TizenOS is 1460. What to do, best regards

just bought a sub3, and connected to my system,,, can now see that there is not trade up discount attatched,,, is that right??  somebody??

Anyone know what the latest update did from a few days ago? Do not see any release notes, just 12.2.2. 

Has anybody had success with any particular model of car charger for the Sonos Move? I bought one that matched the specs on the Move technical support page and it didn’t seem to work so looking for a brand or model that does.

When playing content that was encoded with Dolby Atmos from Netflix with the S2 app, it used to show the Atmos badge. I just noticed this week that it doesn’t do that anymore. I have a Sony XBR CH90. Anybody else having the same issue?

Evening all.I’ve now upgraded all my old gear and gone full S2.Not greatly worried by the value/promises/what’s to come debate BUT, would love to hear your audio assessment before any after of going Amazon HD on S2 please.All my boxes ( Connect Amp’s and a Port & several SW’s) are linked to B&W CCM 684’s and 682’s and are hard wired RJ45..Simple question ….  can you tell the difference? Before Amazon HD and after going Amazon HD on an S2 system? And how big of an improvement is it?Thanks

When you look into the Sonos arc which they sell at Costco‘s would it be wise to also attach the subwoofer? And if you do that, do you need rear speakers with that type of sound bouncing off the ceiling?  

I have an S1 system which is zoned throughout my house using Connect:Amps. I want to get an Arc to replace the existing playbar but I believe that the Arc is not backwards compatible with S1 and nor are the connect:amps compatible with S2. This means I’d have to have a separate system for the Arc only on S2 which would not integrate with the rest of the house zones. Can someone please confirm this?