Spaces & Setups

Is there any simple way to connect an Amazon Firestick to the Sonos Five? As far as I can tell, it’s not possible without a lot more kit because the Firestick only sends to bluetooth and has no line output. If I’ve got that wrong, please tell me...

Looking for some indication that Sonos is working on M1/M2 support for their desktop app. And BTW I sincerely hope Sonos is planning on feature parity for the desktop app as well.  

My home theatre consists of Arc, Sub Gen 3, Sub Gen 2 and 2 Play 1s for the rear. Do I go with the Era 100s or the Era 300s to replace the Play 1s in the rear. Sound, not cost, is the prime concern. 

When Sonos Era 300 will be available in India?

Perhaps a question for the Sonos folks.I’m looking to replace a pair of Play 3s in one of my rooms. I’m reluctant to go with Play 5s because of the size. Will two Era 3s be a good alternative? On a related note, if I bought a pair or Era 300s, could I run a phono turntable and CD player into the two available line in ports? Many thanks

HiDespite checking Windows 10 firewall allows private access to Sonos controller and Sonos library, I am still geting "Unable to play 'xyz.mp3' - unable to conect to //room/userSometimes it works, sometimes doesn't. Has anybody had this? 

I have a home theater with the arc, 2 ones, and a sub. I had the setup for a few months and haven't heard sound coming from the sub. The sub is connected, the white light is on on the sub, and I've set the sub level to +15. What am I missing here? Is there a way to test the sub to produce a sound? 

I have a new Samsung QN75Q80B TV and a Sonos Arc sound bar. The sound bar is connected via eARC. In order to get the Sonos sound bar to play, it must be the only HDMI port in use at the time the TV is turned on. I can then connect my Spectrum cable box to any of the remaining HDMI ports and Sonos will remain as my sound output. All is well with TV and/or cable functionality.  However, if I turn off the TV and later turn back on with everything connected, I will not be able to select Sonos as my sound output, it keeps reverting back to TV speakers and will not allow me to select Sonos.  This situation will remain constant until I disconnect the Spectrum cable box HDMI cable and re-initialize the Sonos as the selected sound output. The Sonos sound bar begins emitting sound as norm.  Then, I can reconnect the Spectrum cable box HDMI and everything is back to norm.  I shouldn't have to be disconnecting and reconnecting the Spectrum HDMI cable each time I turn off/turn on the TV. 

Having just read all about the new Sonos Era 100 I am unsure if I add one to my existing system, will I be able to stream a bluetooth device throughout the whole house? Any ideas?

I recently added a second hand Sub to my Beam. To begin with it would not connect to my Asus TUF-AX5400 WiFi router. I then connected with ethernet cable and finished reset and setup with the Beam. However I do not want to use cables, so I switched to WiFi and disconnected the cable. The Sub reconnected and so far everything works perfect.. My question is that when I look at connected Clients with my Asus app, The Sub shows up as disconnected, but it´s working fine. If I check with the Sonos app, it shows that Beam and Sub is connected. Why is that? Just curious :-)

I'm sure it will work, but I'm curious if anybody knows if the era 300's will work as surrounds with an arc and dual subs config? Again I'm sure it will, just wanna have that confirmed.

So….… Last Saturday(09/12/20), all of a sudden, I was able to control Sonos from the Lock Screen on my iPhone.  It worked on mine and my wife’s phone.  When we woke up Sunday morning, it was gone. Sonos. Make it work, we are tired of waiting.  *Moderator Note: Modified in accordance with the community guidelines.*

I'm thinking of buying SONOS sub (Gen.3).Can I send Music from my iPhone to SONOS sub (Gen.3) directly via 'AirPlay 2'? for Example:iPhone SE → SONOS sub (Gen.3)iPhone SE → HomePods and SONOS sub (Gen.3)without Other Sonos items. Moderator edit: combined posts

I have a playbar connected to the TV in the great room with a sub and two play 3’s for surround sound. Because the area is very large (kitchen is 30-35 ft away from the TV) I would like to extend the TV sound into the dining/kitchen area with another playbar and two play 1’s. I originally wanted to designate the area as two rooms, Family Room and Kitchen, ( so I could turn off the kitchen area when watching a movie) but realized that I don’t have any way to get the TV sound to the second playbar that way. So I suppose I could add all the speakers to the Family Room but I don’t see how to do that on the app. I don’t see the option to add anything to Family Room.Please advise

I have my Arc immerse system on order and keep reading how the Arc butchers music in terms of sound and stereo separation.  Tight of a solution of nixing the Arc and buying 3 5’s and a sub instead while using four of the five 5’s for true stereo F+R for music, and then using all 5 (add center) for cinema….thoughts?

Is a SYMFONISK lamp suitable for outdoors?  I'm talking about a covered deck. 

I am so confused at this point.  I have a beam connected to the tv and a new turntable with preamp. I also have a Sonos one in another room and am likely to move it and add another one to create surround in living room. I also have two echo dots in other rooms.  I want to play the turntable but don’t want to buy bookshelf speakers. I have a small apartment so wanting to make the best with small options and want to integrate what I have.  So, I assume I need the sonos amp? If I buy a port the I’d also have to buy a separate amp?  Help!! 

I updated app yesterday and i have some problems : my “Beam2+2xOneSL” disappear except my 2 SONOS Roam. I needed to reset my “Beam2+2xOneSL”. Now I have a new problem 😂 :I see my Beam+2xOneSL (= Home Theater) in the App but not my 2 SONOS Roam… I keep my 2 SONOS Roam ON and kill the app. I restart the app : I see my 2 SONOS Roam but not my Beam+2xOneSL anymore 🤣 I turn OFF my 2 SONOS Roam and… My Beam+2xOneSL is back and my 2 SONOS Roam disappear If I turn ON my 2 SONOS Roam, they don't appear in the appLove this app!Edit 1:When my “Beam2+2xOneSL” is in the app, if I try to add new devices, the app cannot find my 2 SONOS Roams 🙄…And When my 2 SONOS Roams are in the app, if I try to add new devices, the app cannot find my “Beam2+2xOneSL” 😡Edit 2:All my SONOS devices are on the same network (and same simple wifi network). Moderator edit: Combined posts

anyone have ideas on how i can stream music thru speakers in my lobby 24/7, without a phone or tablet?Thank you, Mark 

Can anyone recommend a method to "add" records played on the Carbon Stream to my Sonos music library? Thanks,Mike

I have this music track that I can’t seem to remove, delete, or however you want to phrase it. It’s the Tinlicker track in the pic. My music sources for Sonos are SoundCloud and Mixcloud. This particular track is not on my list of music of either one. I’ve deleted the SoundCloud and Mixcloud app from Sonos and it still appears as you see. Any ideas on removing it. On any other song in my lists, deleting it from the source doesn’t allow it to show up on. Never heard of CreateRadio either. my Sonos app. 

HiIs it possible to use the ethernet embedded in HDMI for internet connectivity - i.e. can the Beam (or my LG C2 TV) bridge its ethernet to my home router, meaning that I don’t need two physical connections? Thanks in advance

I’m running 2x Sonos devices from Mac and iPhone.  Both have old operating systems.  Everything was fine until the recent Sonos update.  Now I can only run one device at a time from either iPhone or Mac, and am unable to tie the two together as a system.  Any ideas how I can fix this without the expense of upgrading both Mac and iPhone. 

Everything was working fine and then suddenly sound issues.  Play at connected to TV with digital audio cable.   Suddenly it stopped working,  after review it’s working but to hear the tv sound has to be up to almost max.   Remove tv and play music l, it’s normal nonissue.   I check settings and rest and same. I’ve tried Dolby, arc and standard. Same behavior. Check the cable it’s in secure when I pull out of playbar it had the red light  any thoughts as to what’s going on?  

Hi,My first post. Sonos has a page - Sonos Power Consumption While Idle, is there a similar page for the Symfonisk products? Also does SonosNet usage have a large impact on standby consumption? I only stumbled onto SonosNet today, I wonder why Sonos/IKEA don’t promote its use?