Home theater

Discuss Ray, Beam, Arc. Playbar, Playbase, and the entire Sonos home theater experience. Should you get a Sub Mini or a Sub? Maybe two Subs? Which Sonos work with your TV? Talk about your Sonos Home Theater experience here.

  • 6,506 Topics
  • 53,801 Replies
O
Omerpwnz
started this topic

Where should I place Sonos Era 300?

I got Sonos Arc and Sub under my TV, but I lack a rear/surround sound. So I consider buying Sonos Era 300. What do you think is the best pla...
  • 0
  • 11
Tips & Tricks

Understanding Surround Sound and Sonos

  • 11
  • 17
Ryan S
Ryan S
started this topic

Home Theater and Television Recommendation Megathread

Looking for information on Sonos home theater setups? Find answers about surround sound, Dolby Digital, TV recommendations, and all the rest...
  • 16
  • 254

6506 Topics

B
BobbyAxelrodContributor I
asked in Home theater

Old sub compatible with Beam gen2?

hi all,I own a gen1 system composed of a playbar and a sub and a few play 1 speakers.I would like to upgrade my playbar to a Beam Gen2will it work with the rest of my setup?thanks mucho  

1
106rallye
6 months ago
B
BUFossilContributor I
asked in Home theater

Sony Bravia Model XR-65A80K cannot find Sonos Arc sound system

Sonos ARC S19 connected with HDMI cable, not Fiber Optic. HDMI 3 Arc on TV connected to HDMI on Sonos. I have rebooted both TV and Sonos. I have switched HDMI cables. When I press Settings on TV controller, scroll to Audio output, and scroll down to select Audio system, it says, “Switching audio to external speakers.” Ten seconds later it says, “Audio system is unavailable. Switching to TV speakers.” When I disconnect TV and Sonos from power for 2 minutes, and plug them back in, it says, “Switching audio to external speakers.” Ten seconds later it says, “Audio system is unavailable. Switching to TV speakers.” In the Sonos app on my iPhone, when I go to Home Theater > TV Setup, it says, “Let’s get your Sonos connected to your TV.” After the required steps it says, “Audio System not connected.” The four tiny white LEDs on the Sonos sound bar indicate it is working properly. When I go into External inputs > Manage inputs, all four HDMI ports are set up properly. When I go into Exter

4
B
6 months ago
R
rohithere810Contributor I
asked in Home theater

reset playbar

there is not any reset switch please help me

1
Airgetlam
6 months ago
C
Cdn9765Contributor I
posted in Home theater

Trueplay / Reverb and RT60 - feature request

Since Trueplay does its best to measure the acoustic space I was wondering if it could report on a best effort reverb / RT60 measurement to help with understanding echo and reverb in a room.  it would have to expose some sort of report after tuning a room - something like the room could benefit from a bass trap or reverb is highest in these frequencies and maxes between 1 and 2 seconds or all frequencies tested except X are below 50 ms etc  

1
Airgetlam
6 months ago
H
HarvGTrending Lyricist I
posted in Home theater

Sonos Arc and Oppo UDP-203 - Only Getting Stereo PCM 2.0

I've just connected the Sonos Arc to my LG 65EF9500 TV via HDMI ARC (eARC not available on the LG). When using my Amazon Fire Stick with a movie encoded with Dolby audio, the Sonos app shows Dolby Digital 5.1, which is all I expect without eARC on the LG TV.However, I also have an Oppo Blu-ray player (UDP-203) connected to my Denon receiver (AVR S920W) via HDMI, and the Denon is connected to the LG TV also via HDMI.I have the Denon receiver set to “pass through” for HDMI so that the the Oppo signal goes to the LG even with the Denon switched off. (I have also taken it out of “pass through” mode and played a Blu-ray disc with the receiver on - same results noted below.)When I watch a Blu-ray disc encoded with Dolby surround audio on the Oppo, I cannot get the Sonos Arc to recognize the audio properly, and the app shows Stereo PCM 2.0. How do I get it to recognize Dolby Digital 5.1 like it does with the Fire Stick as noted above?Is there a setting on the Oppo or the Denon I need to chang

39
D
6 months ago
G
GW WNCTrending Lyricist I
posted in Home theater

HDFury Arcana

Has anybody used the HDFury Arcana to successfully pair the Sonos arc with a Samsung TV with an Earc HDMI port, and a Direct TV receiver? Since it costs $299 I would rather not buy one if it isn’t going to fix the issue. I posted elsewhere (as have others) about my new 2023 model Samsung TV not recognizing or ‘handshaking’ with my Sonos arc. At the moment I’m using an optical input between the two, but I don’t think I’m getting Dolby Atmos or the best out of my Sonos surround system. 

13
T
6 months ago
S
Steveply007Contributor I
asked in Home theater

night mode schedule

Please can we get a schedule for night mode. Its such an easy thing to do. It only changes the phone app! Its been asked to be added for years. Yes we can do a work around. What a faff that is. This request has been asked for for so long. Are your software engineers asleep? 

3
Bumper
6 months ago
C
CambridgeContributor I
asked in Home theater

surround sound

Do you really need 2 of the same devices for surround sound and why is that. I have 7 speakers collected over the years and all are differnt models do I really need another to use as surround sound. I was hoping to connect a Sonos bean and Era 300 together.  ThanksH

2
jgatie
6 months ago
R
RkkrContributor I
posted in Home theater

building a new house with Sonos amp with 4 in ceiling speakers

Hi all,I and hoping to get some clarification on the set up of the Sonos sounds system in the living room as I am building a new house.the living room is around 10m by 7m with 3m height.there will be a TV on one of the walls. I am hoping that I could have a TV connected to Sonos amp via HDMI. Then a single Sonos Amp can be connected to 4 in ceiling speakers. It looks to me that as long as each speaker is at most 8 Ohms, it is ok.the purpose of sound system is to listen to music and watch some TV. I am not after some elaborate home theatre set up I am also hoping NOT to use any sound bar including ARC my questions are;I intend to use four Sonos in ceiling speakers , which I understand is 8ohm. Can someone confirm that it is, hence, ok to connect 4 such speakers to a single Sonos amp? In Sonos website, it looks like you can connect such speakers in parallel to the two channels. See this link .(https://support.sonos.com/en-au/article/connect-four-speakers-to-your-amp-or-connect-amp). It s

2
Stanley_4
6 months ago
N
NYWadeContributor I
asked in Home theater

Wired Arc not appearing in Sonos App and not able to connect to wireless Gen 3 Sub

I have several Sonos products in the house.  I have wired 2 Amps...1 connected to 4 Sonance speakers inside and 1 connected to 4 Sonance speakers outside.  I have 3 other wired sound bars...2 Beams and 1 Arc.Only the Amps and each associated room appear on my Sonos app.  I was able to add the 3 soundbars, but they immediately “disappeared” from the app.  I’m not so worried with the soundbars being visible on the app...I only use them for use with the TV.  Although, I bought a Gen 3 Sub to pair with my Arc for the beginning of a surround sound in one room.  The app recognizes the Sub isn’t paired to anything, but the only option is to connect it to one of the 2 Amps, which I don’t want to do.Everything is wired, except the Sub.Since the Arc doesn’t appear on the app, I can’t connect it to the Sub.  Is this only an issue because the Arc isn’t available on the app?  Or is this a different issue?Update:  I read some other threads about the disappearing rooms.  So, I rebooted my App, and th

8
buzz
6 months ago
T
TimbaukContributor I
asked in Home theater

Ray connection to Panasonic TV.

Hi there,I’m new here and I’m really hoping someone can help. I have a Sonos Ray which is working perfectly as a speaker over wifi but whenever I try to connect it to my TV it fails. My TV is a Panasonic LED TV, model TX-49FX555B.I’ve used two different Optical digital cables, including the one provided (with the little plastic covers taken off) and the app keeps telling me that no signal is detected. I use an Apple TV but I’m obviously connecting  directly into the TV (I’ve tried unplugging the Apple TV in case that was an issue) but the optical connection is just not working. Everything else is ok, the Ray recognises the remote (the light on the ray is working).Any advice would be greatly appreciated - I’ve been faffing around with it for ages!Thank you in advance, Tim. 

10
T
6 months ago
M
Mick8Contributor I
asked in Home theater

Sonos Arc bass gone, tiny sound, low volume

Hi everyone, Was wondering if anyone had similar issues?I bought refurbed Arc 2 months ago and it was perfect, was very impressed with the sound.Few days ago I noticed the volume level was lower and the sound especially bass was very tiny. That’s on all sources Tv, AirPlay, Apple Music etc. The Arc volume level is much lower now compared to other grouped speakers in the house. It sounds more like TV speakers than the Arc it used to. I am not sure if it happed after one of the updates. Tried to reset but even the sound when the Arc starts is much lower now and when I did last true play the test sounds were much lower as well. I also remember at the beginning the two side firing drivers used to produce quite a lot of bass but not anymore, it’s like they are just playing ambient sound now. Any thoughts? Thank you

2
Corry P
6 months ago
G
ggmogollonEnthusiast II
asked in Home theater

Sonos Arc Muddy/Bottoming out Bass

Beyond thrilled to receive the new Sonos Arc. True played my room and I have loudness on as well connected to LG B8 using Tidal and Spotify. Most of the sound range is phenomenal, aside from the bass. At even half volume the woofers are extremely muddy and sound terrible. Not sure if this is because I have under two hours of use but I wasn’t expecting to have to break-in the speaker. I own set of speakers next to it in the same room (KEF LS50W) and the difference is night and day. There have also been posts on Reddit regarding this issue. It is interesting given no reviewers have mentioned this issue but more than a few recipients have. Has anyone else experienced similar issues? Turning loudness off helps but it is disappointing for such a highly anticipated product. 

1406
S
6 months ago
W
Wayland1984Contributor I
posted in Home theater

Soundbar/Surround Placement?

I’m considering ditching my 5.1 surround sound system for Sonos (I love the system now, but HDMIs buried in the wall need replacing, necessitating serious construction to make things work). My TV is mounted above a fireplace, and is tilting down to compensate for the less-than-ideal mounting situation. If I put the Sonos Arc on the mantel below the TV, I there wouldn’t be a direct line of site to the ceiling (I’m guessing altering acoustics).  If I mount the Arc to the TV mount (so as to hide cables), the speaker would be angled down.Does anybody have this same situation?  Would acoustics be drastically affected? Also: when it comes to the surrounds: there isn’t any space behind the couch.  Currently my surrounds are mounted to the left and the right of the main-viewer’s seat on the couch (most of the promo images show the surrounds located behind the listeners…)

3
melvimbe
6 months ago
R
richdpContributor I
asked in Home theater

Using Connect:Amp Subwoofer Output for pairing with Beam

Is it possible to use the subwoofer output from a connect:amp as the “Sub” in a HT setup with the Beam?  I have my connect:amp connected to an active 3rd party sub but when I “add Sub” to the beam it isn't discovered. Thanks

2
R
6 months ago
J
jale01Contributor I
posted in Home theater

Sonos Amp and 3rd party subwoofer issue

Hi! I am having issues connecting my Sonos Amp (Black) to my Klipsch SW-311 10-Inch Subwoofer (or vice-versa). I currently have two Klipsch speakers and the Klipsch Subwoofer connected to the Sonos Amp. Both speakers play but I am getting no sound from the subwoofer. The subwoofer is connected to the sub port on the Sonos Amp and the LFE port on the sub. The sub plays when connected to my Yamaha system but doesn't play when connected to the Sonos Amp. Is my sub's connection wrong? Will a sub with a built-in amp not work with the Sonos Amp? What am I doing wrong? Help please... Jale01

121
P
6 months ago
R
Richie526Contributor I
asked in Home theater

Fixed Volume

Hi! The verizon fios remote cannot adjust the tv volume. It works OK on the app.

3
Ken_Griffiths
6 months ago
F
FriskeAvid Contributor I
posted in Home theater

App says ARC playing Atmos but it doesn’t sound like it

I just bought a Sonos Arc to replace the Playbar. My current set up is Arc, Sub, Sonos 1 & One SL as surround speakers. After switching over to the ARC I can't really tell a huge difference from the Playbar. It sounds good, but so did my Playbar. I've tried some Atmos movies through my 4k firestick. When playing  atmos movie my Sonos 2 app is telling me it's playing Atmos (movies through HBO Max). I changed a setting on my tv which allowed the Atmos designation to show up on my Sonos 2 app. The fire stick also is set for best sound available.  I’ve moved the ARC so it's about 4” below the tv and in front. It's about 5 feet from the ceiling (flat). ARC is about head level when sitting on couch which is about 8’ away or so. I tried true tuning. I've even played with the Highs setting for the Arc and never noticed anything by doing that.  Do I need to unpair my rear speakers and just do speaker and sub?  I’m not sure if im missing something here. Im disappointed that the sound quality

32
Airgetlam
6 months ago
C
Cocode mContributor II
asked in Home theater

decalage audio groupage

Bonjour j'ai dans la même grande pièce une barre de son beam 2 et une enceinte era 300 groupée avec celle ci. Comment éviter ou annuler le décalage audio de la télé qui provoque un écho des dialogues ? Y a t il un réglage précis à faire ? Merci pour vos réponses.

4
Airgetlam
6 months ago
T
tori84Contributor I
posted in Home theater

When was the last time your speaker die?

I have a Beam for coming up 3 years. It was working okay, the next minute just stopped playing and powered off. DIE. I tried different outlets and factory reset but nothing worked. I reached out to the customer service. They offered a 30% discount for the next purchase. Is that the best Sonos can do? is that the service you expect from Sonos?

5
R
6 months ago
J
jay34Contributor I
asked in Home theater

Playbar and Sonos One end of support date

I’ve come to own a Playbar and several Sonos One speakers for free through a friend. I was thinking of adding a Sub mini but I am worried about the life spans of these products. Sonos claims they will support products for 5 years after end of sale dates.Sonos seems to have stopped selling playbar around 2020 So that’s already 3 years. If I buy a sub mini I would be buying into an ecosystem with only 2 years left on the Playbar? (I can’t find end of sale dates for Sonos One).Just want to confirm if my understanding / math is correct here. And to find out the end of support day for Sonos One speakers. P.S.: I’m new here so apologies if this info is easily available.

4
Airgetlam
6 months ago
J
joshikanluContributor I
asked in Home theater

Creating budget Sonos TV surround with Sonos Amp

Hello All, Looking for advice.Current setup: I have a Sonos AMP connected through the ARC port to my LG TVThe Amp is connected to my 3rd party Kenwood Sub and also 2 kenwood L & R speakers on either side of the TV. Proposed budget setup: I wish to get 2 sonos play 5 speakers to replace the L & R speakers.Would this be a resonable setup? Thanks 

1
jgatie
7 months ago
L
Lauren205Contributor I
asked in Home theater

Smart TV play through Sonos

I am hoping someone can explain why there is no Sonos app that you can download to a smart tv so that you can play the tv sound through your Sonos speaker system without a wired connection.  If your phone can play music thru any connected sonos device, and so can your computer, and your tablet -- why is it not the same for a smart tv?  Thank you.

7
L
7 months ago
D
dulyawatContributor I
asked in Home theater

5.1 System + Sonos Amp + B&W Speakers, working simultaneously ?

Hi,I have Sonos 5.1 system (Beam Gen1 + 2 Play ones and Mini Sub) in my living room, planning to get Sonos amp to hook up with my B&W 606 S2. I am wondering, Is it possible for them to work simultaneously ? Is any delay while they are playing music ?Thank you !

4
D
7 months ago
R
RstobiasenContributor I
asked in Home theater

Arc under ceiling

Hi All, Due to heat from fireplace I am forced to place Arc 10cm from the ceiling. I can tilt the arc forward. Will it be ok?  Br Rasmus  

4
Stanley_4
7 months ago
Terms & ConditionsCookie settings