Google Assistant and Sonos

I'm in the UK so it's not enabled yet. Just wondering if you can decide wake words eg 'hey Google' or 'ok Google' or do you get both by default.

I have the Sonos One speaker that supposedly has Google Assistant built in. It is recognized by the system and plays music without a problem. I have gone through the whole install routine for getting Google Assistant to install and the app and it says it is installed. But nothing happens after Hey Google -- no response whatever. One issue I noticed in installation -- the instructions say that the devices appear and you choose if you want Google Assistant on each particular device. I never get that opportunity. At the end of installing Google Assistant after Voice control, I just get a message that says GA is now operating. I've tried removing the sonos and google assistant apps from my iPhone and reinstalling. I say something like "hey Google, play the beatles in the kitchen" (the name I have to the One). Nothing happens. Any suggestions?

Can’t figure out the correct google assistant command to tell the beam to switch audio to tv output instead of Spotify after listening to music. Any one figure it out? When i used Alexa, it was “switch beam to tv”’or something similar. If it matters, I’m also using a Logitech harmony to control the tv through assistant integration.

I just bought the One and thought it would be easy to get setup. It keeps telling me to register my speaker, but it already is register. Getting read to send back at this point if I can not get this to load.

I've tried on my Beam, a Sonos One Gen 2 in my kitchen and my Sonos One Gen 2's as surrounds in my living room. None of them will play a broadcast message no matter where it originates from. I've checked for updates, everything is up to date. All of them will send a message but non of them will play any. Otherwise, the GA seems to be working fine. This is quite inconvenient though. Hope there is an update to fix this soon.

Login to Sonos account in Google Assistant, Yes I want it to control songs, text message: "Decrypt error when parsing state"

I try to add sonos to my google home control. I log on correctly to my sonos account and it completes the process. But at the end, the home control does not get added. I check that everything that the system is updated and all my phones are updated as well.

“I can't do that here but you can ask me to play it on one of your other devices." Get above when I asked Google Assistant to play Spotify on my Beam. Any idea how to resolve?

Google Assistant on Sonos is giving me a problem trying to play my favorite local news station News 1130 from TuneIn as I commonly do on Alexa and Google Home, for example on Google Home: "Hey Google, play News 1130 radio" = "All right, playing News 1130 on TuneIn", station plays. But with Google Assistant on Sonos One: "Hey Google, play News 1130 radio" = "All right, playing CKWX on TuneIn" = "Sorry, it looks like that content isn't available on TuneIn" (CKWX is an alternative name for News 1130). Saying "play CKWX" instead produces the same response. Google Home recognizes "play CKWX" as an alternative to "play News 1130", and the station plays correctly either way. Selecting and playing the TuneIn station News 1130 from the Sonos app to the Sonos One works fine. Playing other TuneIn stations on the Sonos One by saying "Hey Google, play (station name)" seems to work fine in a few other tests. So for some reason the request to play this particular TuneIn station is bein

I have a Pandora plus paid account which allows listening without commercials. That account is appropriately linked to Google home (I can see it in my Linked Media, and have tried unlinking and linking again, which registers fine). Sonos speakers are linked in Google home. However when I play a Pandora station and start it with Google home mini or other home assistant device and send it to Sonos (which I specify "ok Google play x station on Pandora on X sonos", and Google responds saying it is playing on Pandora on X sonos), it plays one or two songs and goes straight to a commercial, like it is a free Pandora account. This is not an artist discovery thingy, but a true commercial (which I never hear listening to hours of Pandora on my tablet/phone). Is anyone else having this issue, or have a fix? Pandora plus works great if I play it straight on my Sonos; works fine if I play straight on Google home, or from Google home to a Chromecast audio device into my sonos; only doesn't work

After the outage earlier today I finally have everything working and I couldn't be happier (I can play, pause and change volume on my old Play 3s with my voice which is all I wanted for two years now). But it's a little unfortunate that in a room with (1) a Google home and (2) a sonos speaker, I still have to append "on the kitchen Sonos" to my requests to begin playing music (otherwise the music plays on the answering Google device). The Google home app lets you configure what the default device is for playing music, and it lists not only my various Google speakers but also my vizio TVs on the network, etc., but it strangely doesn't list my sonos speakers. Is there a way to make this happen?

My Beam is acting glitchy again. Voice command to ask Spotify to play was working the other day now it isn't. It says "I can't do that here but you can ask me to play it on one of your other devices." However, if I use Spotify Connect, it works. All other voice commands work.

almost 50% of the stations that i ask google assistant to play on the sonos won't play and i will get this error. google assistant says: sorry it looks like the requested content isn't currently available on tunein. This is not true. these stations work when i use the sonos app to play. furthermore, these stations work when my friends use google home to play the same stations i want to play. so basically, when i ask google assistant to play these stations for me i get that error but if i use the sonos app it will play the stations.

Ok, Sonos MOD EDIT: PROFANITY. I'm from Ukraine and I bought two Sonos One and planning to buy Beam in the future. I bought it even though Alexa do not work with Russian language at all as I heared that there will be Google Assistant which is working perfectly on my Android device. And now I MOD EDIT: PROFANITY can not activate it, as it says that's it's not available in my country. Again it's working perfectly on my Android device. I can assure you it understands Russian perfectly, moreover almost everyone person from post USSR country understands Russian and can talk on it. So what the MOD EDIT: PROFANITY problem to activate it as it was done by Google themselves? I bought two Ones, a Sub and was planning to buy Beam. Not planning now for sure. MOD EDIT: PROFANITY MOD NOTE: POST EDITED TO MEET COMMUNITY GUIDELINES

Frustrated that I can’t use voice commands using the google home mini to choose songs on my old Play5

I see sonos is not in google home control. But when I try to add it, it prompts me to log into my sonos account and it successfully logs in. But but at the end it fails to link with sonos. All devices on lates firmware update. And all controllers are updated.

I've seen the topic of 'casting', specifically in terms of how the Google/Sonos integration works, discussed in various topics recently. I thought it might be useful and fun (for me at least) to have a separate topic. First, I'd define casting very broadly. I'll say that casting is the process of interacting with one electronic device (A) for the purpose of causing a second device B to playback audio or video without wires. This definitely is broader than one you'd typically think of as casting, but I think it's worth defining it this way to better understand the interactions. Maybe 'control' is better word to use, with casting being a subset, but control would go well beyond audio/video, and I wish to limit the scope. So second, in an attempt to categories the types of casting, given how I've defined it, here what I see. 1 - Stream casting (probably a better word for this) - This is where device A actually passes the audio/video content to device B. Device A could be ge

Ive just tried to change radio stations using assistant and now suddenly my speaker isn't available anymore eventhough it was just playing. This is just a recent example but there just seems to be endless issues and incomplete functionality with assistant. Nobody from Sonos is explaining what's happening or why we had to wait so long for something so bad.

I have a google home mini and the Sonos beam in the same room, and they are linked in the Google Assistant app. However, when I ask a question such as “Hey Google, what time is it?”, both the Home Mini and the Beam answer (not in sync with each other, so they talk over each other). Is there any way to get just one or the other to answer, but not both?

This is a bit complicated: I have tried several times to link my Sonos One speaker pair to Google Assistant. I’ve tried in a couple of different ways: From the SONOS App, and when that failed from my google home app. In both cases I eventually ran into a notification screen stating I need to register my speakers. As far as I remember my speakers are registered, and the app and speakers are working fine. I followed the directions that popped up, stating to go to account settings to register speakers, and that if I cannot I need to perform an update. I went to account settings and did not find a way to register my speakers, so I attempted an update but the app is already up to date.

So I have a playbar with a sub and a 1st gen Play 5. I successfully linked my sonos account with my Google home account. The Sonos speakers show up as devices, but when i try to give a google home command based on the name it says in my sonos, Google home doesn't know the device. Using Alexa before had no issues with these devices. Can someone explain what the issue is.

Is there a way to control Sonos room groupings via assistant? Understood you can’t group google groups with Sonos groups. In my case I am strictly interested in controlling Sonos groups. I have common groupings id like to configure. Instead of setting them up manually I’d love a way of setting these groups up on command

I was so excited to see the communication this week about the integration with Google home and when I finally tried to connect my Sonos system with my my Google Home mini I get the following error: 401.That’s an error. Your client does not have permission to the requested URL /services/auth/handoffs/auth/complete?state=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&code=eyJhdXRoQ29kZSI6IjA5NDFmNzY2LTRkM2UtNGIzNC05NzU

Hello all! I've chatted with Sonos support on Twitter regarding my issue, but I am not entirely convinced by their answer. Here is my setup: Two Sonos Play:1 stereo pairs, spread over four rooms. One Play:5 in the fifth room. I end up with three groups, group1 (stereo pair), group2 (stereo pair) and group3 (single stereo speaker). After linking my Sonos with Google Assistant through the app, all the three groups be seen I the Google Home app. Here is where the fun begins. If I say to my Google Home: "Play music on Sonos", "Play next on Sonos", "play previous on Sonos", I get responses like "OK, playing music on [name of the Sonos group name]" (I don't know how Google Home decides which one. Say, this is not a big deal... However, if I say "set volume to 20% on Sonos" or "turn it up / down on Sonos", only the volume on one of the Sonos groups is changed. If I want to change the volume on all of the groups, I have to give the command for each group separately and specify t