Fix & Optimize

One of the stand pole caps, for Era 300 stand, cracked during installation.  How do I get a replacement? 

My play5 gen2 operate only by Ethernet. No way to Connect by Wi-Fi. Suggestions?

Volume level slide bar will appear but an attempt to adjust volume makes it vanish or on occasion the slide bar won't appear at all. Anyone else have this issue? Resolution? Also any way to get the volume level number to appear on the tv screen? It sure is irritating to have to open the app just to see what level I am at.

Are there any speakers or a sub that can be paired original arc?

I have the beam soundbar connected via HDMI (eARC), with a Sub Mini connected wirelessly to the beam.   Each time I turn the tv off, the sub disconnects from the Beam.  I have to unplug the Beam, then power it back on - the sub reconnects.  Any suggestions to keep the Sub Mini connected to the Beam?

I have a Sonos Roam (first generation) and a Sonos Connect:Amp (maybe 1st gen).When using the Sonos App - I can see both the amp and the roam, and control music. Things work flawlessly beyond the app being horrific.When using spotify directly - I can see both the amp and the roam and control music. This experience works the best.When using Apple Music - I can ONLY see the roam, and control music. I can’t see to get it connected to the amp. I have tried normal troubleshooting steps (restarting amp, etc), however nothing have been able to work. I’m trying to transition from Spotify to Apple Music. Any ideas to fix? Does the amp just not work with airplay but spotify is able to work around it?

iOS App. Latest app. Latest firmware.The Roam is a portable device meant to be taken away from one’s home network.So- while on Bluetooth only, one would like to monitor the battery level of one’s battery powered device.The old app could do this. Every other BT speaker I’ve ever encountered can do this.The Roam. Cannot.Please add back this basic feature.The Roam has been out since March 2021 and it had this capability until the new app was released. In May 2024 with the release of the new app it lost this capability and it’s been well over a year and has yet to be restored.  Embarrassing for Sonos, really…And please don’t respond with “you can use a voice assistant” or “because of the way our system uses BT it won’t work” because it used to be there, so just put it back, please?

I have a Sonos Beam Gen1 + 2 Play Five Gen2 + Submini. When playing music using the Sonos App, the Submini has no sound; the diaphragm doesn't respond. Could someone please help me? Thank you.

I’ll be moving to a new house soon.  In the basement is a rec room where we will install a TV and we would like some decent audio.  I currently have a 5.1 system with towers and a big center, on-wall surrounds, and a receiver but looking to make things easy in the new house, one remote (Apple TV) and a clean install.  Plan is an Arc Ultra on the built-in cabinet, with a Sub 4 on the floor.  The sofa will be right against the back wall so there is no room for surrounds on stands.  I can wall mount or ceiling mount, though I don’t know the best location.  I have ordered Era 300s and hope to use those, but maybe an Amp with some 3-rd party surround speakers might be the better option?  It looks like I have some conduit in the ceiling, though placement is odd about midway between the TV wall and the back wall.  I may be able to run power to the Era 300s via this conduit or speaker wire to the Amp.  Room will be used for TV, movies, and games.  Music isn’t really a big concern. If the recom

Hello, I have bought a new sofa “paramount” from Sofology UK. It comes with vibrating seat function for enhanced movie experience. Not considering how locked down the Sonos system is I have clearly overlooked this. The sofa can connect via Bluetooth to the Tv and works fine but this means not using my beam or 100s that I use for surrounds. I appreciate this is a long shot but is there any work around I could do to make use of the sofa. Only option I have come up with is to link my phone to the sofa and play the film both on my tv and phone at the same time, but this would not work for any live Tv and is also just a faff. Thank you in advance for any help.

I’m just wondering about sound absorption panels and Sonos 9.1.4. I’m treating my room for hifi stereo listening with absorption panels(first reflection points plus rear wall and corner bass traps).However, in the same room I’m also going to use Sonos Arc Ultra/Sub Gen 4/Era300 for immersive movie sound.My question, since Sonos is a virtual system and relies on sound bouncing off the side walls for side channels(and ceiling), wouldn’t it be counter-productive to have those sound absorption panels? Or would Trueplay correct the room acoustics within the Sonos system to compensate for the sound panels?

After 11 years of faithful service, one of the speakers in my Sonos home has died. It was the first Sonos product that I purchased back in 2014. Now I have a home full of Sonos speakers that I’ve purchased over the years, all of them S1 compatible, and will not work on S2 (don’t get me started!). What can I replace the Play 5 with? Thanks.

I have had the ERA 3 for about 1.5 years, and after Sonos made an update to its system last year, I am now unable to pair this speaker to my computer or my iphone.  I have spent hours trying to figure this out with the help of Sonos technicians and with the Sonos community.  I am beyond frustrated and disappointed in Sonos for not fixing this problem and am disappointed that I bought this speaker as an upgrade.  It has been anything but better.

Noticed that when using tv audio swap the Dolby Atmos music is compressed greatly. Will there be an update to maybe like; uncompress it I guess

Could we return all our speakers for a refund since Sonos broke their system?Is anyone aware of a class action we can join?It’s been YEARS and they keep promising fixes that never come.  They used to work fine until the S2 software broke it all.The audio cutouts make it unusable and the speakers are now decorative.I literally have THOUSANDS of dollars invested now useless.

So i own 2 Play:1s. And the one downstairs is fine, and works normally, The one upstairs (the one that’s having issues), works fine in the sonos app, but on alexa, it still said device offline. So i looked it up, and found that i could deregister it from my alexa account, then add it back, however when i add a speaker, it doesn’t find it during the search.  

Unfortunately I cannot respond to other posts where people were having this issue, so I am just writing this forum post here in hopes that people come across it from their search engines. If you are experiencing your microphone on your MacOS device decreasing in volume and then coming back up again, this appears to only be impacting M3 and M4 devices as they share the same Bluetooth adapter. Don’t ask me why, I haven’t got a clue. The fix is as belowVisit chrome://flags (or edge://flags if you’re using Edge) and do the following:Locate Allow WebRTC to adjust the input volume Set this to Disabled Select Relaunch in the bottom right corner Other things to note:Even if your microphone is not in active use by Chrome/Edge, if you use Slack, Zoom, Teams, Webex it will still reduce the volume. Simply having Chrome/Edge open seems to trigger this behaviour This doesn’t appear to be an issue with non Chromium based browsers It would be great to understand if this does actually fix your issue, s

I have 4 x Play:1s and am getting fed up with the workarounds I have to use to play my own music. I know Play:1 isn;t compatible with Airplay per se, but I thought there might be a way of getting to work if I add a 5th, more recent Sonos device to the group. Is this is true, and iso, could somebody advise on the cheapest/easiest way of doing this? Thank you

For more than one and a half year, Sonos users have been waiting for a solution to the annoying issue that it isn’t possible to play albums (eg. from symphonies): When a movement (or song) has finished, it doesn’t continue to the next one. This is what ​@Jamie A from the Sonos staff wrote three months ago on a one and a half your old issue:I’ve contacted our team and raised this with them, after testing on my end and asking my colleague to try as well, we also weren’t able to play albums using IDAGIO. This has been raised as an issue as this is not expected and I’ve tagged this thread with the relevant bug report.We don’t have an ETA to share on when this will be resolved, but the team is aware and working on a resolution. I was informed that this should only occur on the mobile version of the app, you should still be able to queue using the desktop version of the Sonos app. Another workaround would be to make a playlist of the album in the desktop app, which I understand is not ideal

One of my Era300 speakers has started making a repetitive, but random rhythm, drumming sound. Whether I am playing music or not. Once I turn it on and off, it stops for a while and then restarts. Anyone else have the same issue? It’s only the left one that does this. 

Hi, trying to add a Connect Amp but it requires an update first.It keeps going in a loop (gives update button option, I click it then it loops back to click the update option again)but doesn't show an error code. Also tried downgrading to the previous Sonos S1 app. Fails to find the amp. Tried the usual reboot after factory reset of holding in the speaker/mute button until it goes into pair mode (green colour). Cleared out the android app cached data as well and tried the website app but it doesn't allow you to add a device....grrrAnyone know how to sort this?

So i own 2 Play:1s. And the one downstairs is fine, and works normally, The one upstairs (the one that’s having issues), works fine in the sonos app, but on alexa, it still said device offline. So i looked it up, and found that i could deregister it from my alexa account, then add it back, however when i add a speaker, it doesn’t find it during the search.  Any help would be appreciated  

I have a Sony Bravia TV with a soundbar.  The soundbar’s not brilliant.  Would it help to get a couple of Sonos speakers to use as surround sound?  And how would I connect them?  I already own a Sonos Play 1.  Can I play my telly through that?

Very weird scenario. I can’t remove or reauthorize any of my music content services. When I try and disconnect the service Sonos tells me it was unable to disconnect and there was an error please try again. When I try and add/reauthorize account because I can’t disconnect same answer it goes to app login page for Sirius xm and Spotify and tells me there was an issue reauthorizing the account. I call Sonos support and I can’t even run and submit a diagnostic to Sonos. It times out and says there was an error submitting diagnostics. I log in on the web browser through my desktop and all my speakers are offline. Super weird because my app shows all of them active. I can start Spotify only through the Spotify app not through Sonos and I can control the volume of each device from the Sonos app. I can also unpair groups and re add speakers through the app so obviously the system is working and responsive just appears to be an issue though the app and the browser. I’ve uninstalled and reinsta

Hoi there,Have been using Arc Ultra + Sub 4 + 2x Era 300 aka Ultimate Immersive Set with Arc Ultra for over a year now and been quite happy with the system overall. Sure there has been SW glitches here and there, but no deal breakers, and the sound is great. But the issue I got , is that the Sonos Android app installed with my Samsung S8+ tablet forgets all the Arc Ultra’s settings (speaker lvls, Speed Enchantment, TruePlay) multiple times a week. Not a deal breaker, but it grows tedious after a while for sure. I was thinking that this might be due to  the schedule I’ve set the system to cut off power with a separate timer for night time, but got the same timer thing with my living room Sonos Beam+Sub Mini for years, and it has never lost its settings to date. Wondering if anybody else has experienced the same, and if there’s a fix for it? I am dead sure there was a question like this in the forumsalready , but could not find it just now. Thanks!