Fix & Optimize

Until recently this was working just fine.  So if I said ‘Hey google, turn on the lights’, it would ONLY turn on the lights in the same room as the Sonos speaker who heard the request. But now it turns on ALL the lights in the house!!! If I say ‘Hey Google, turn on lounge lights’ this does work - but room awareness was working before!I’ve looked at other posts but nothing suggested works for me.  Is this a Sonos or Google issue? BackgroundI moved broadband suppliers last week, and their hub wouldn't let me use the same wifi password, which of course resulted in the Sonos devices going offline.  Using the app I updated new network on one of my devices (which worked fine) but mistakenly didn't click do this for other devices so they were removed from my sonos setup.  For each of them I had to factory reset & re-add to the network - which means re-adding Google assistant support again. But afterwards all working ok. Checked / Tried so far….Confirmed each Sonos device has a room name a

The app on my phone is up to date and I can now save the queue to a playlist but I still cannot  configure the app to sort my music library by album artist (which was supposedly reintroduced in the early December update).Any thoughts on why this seems to be missing?  

Can someone tell me how i can get the Sonus to always link to the TV as a source.I have two issues:when the TV goes into standby, and then is turned on again, the Beam does not seem to pick p the TV, and the sound goes through the TV speakers. I have to turn off the Sonos, and then turn it on again how do I toggle between streaming music and the TV. If I stream music, and then I want to switch back to TV, I can’t work out how to do thisI can’t see any setting in the app - I have a Sony Bravia  3 TV 

Spotify recently added Dolby Atmos for premium service customers. When I play music on my Sonos app is there an indication that Dolby Atmos is playing? I don’t see any indication that the song/album that’s playing is in DA. When I play music from Spotify app on my iPhone on bottom left it shows lossless, not DA.

Hi all, I’m having inconsistent volume control with my setup and would appreciate any advice. Equipment:TV: LG Nano866NA (2020 model)TV software: webOS 04.63.25Soundbar: Sonos Playbar (connected via optical)Remote: LG Magic Remote (also tested with brand new replacement) Issue:The LG on-screen volume graphic appears every time I press volume up/down, but the Playbar responds inconsistently from normal seating distance. If I stand close to the Playbar, volume works reliably. From the sofa, it misses presses intermittently. Everything worked perfectly for 5 years until around two weeks ago. Steps already taken: Replaced remote batteries Purchased and tested brand new LG remote Re-trained remote in Sonos app (removed and re-added) Set TV sound output to Optical only Full power cycle of TV and Playbar (unplugged 5+ minutes) Confirmed IR is being emitted via phone camera test Tested in different lighting conditions Checked no obstacles in front of playbar. Observations:TV always shows volum

Hola, tengo un era300 y estoy pensando en tener un segundo era300 para emparejados en stereo. Mi duda ñ, usa todos los drivers?, el dolby atmos se deshabilita?. Tiene alguna ventaja el emparejarlos para musica en la misma habitación?. Gracias  Moderator Edit - Translation by Google:Hi, I have an ERA300 and I'm thinking of getting a second one to pair them in stereo. My question is: does it use all the drivers? Is Dolby Atmos disabled? Are there any advantages to pairing them for music in the same room? Thanks

I saw that my surrounds and sub were showing as not connected in the app and were just showing up as “product”. These were all working fine until very recently. The arc is still showing up but nothing else is. There is also no sounds coming from the surrounds when I am watching TV. I tried to reset the system and even did a full factory reset on each component including the arc. I started by re-adding the Sonos 1 SL’s each to the app followed by the sub. That worked fine and they were showing up. After I added the arc everything was still showing up happy in the app. Once I connected the surrounds and the sub to the arc they went back to showing as “product” and not being connected with no sound coming out. How do I fix this? It’s infuriating. 

Hello,I noticed the following issues just after upgrading my Ace headphones to the 3.9.9 FWPop artefacts from the ANC when working on my computer, it’s related to the ‘click’ sound of my mouse and to the keyboard keys sound. I get that issue with Adaptative ANC ON and OFF (I’m aware of the well knowed ANC pop artefacts with some specific sounds, but this one only appeard after the update)Audio artefacts when using aptX Adaptative in ‘low latency’ mode, it’s partially fixed by switching the bluetooth connection mode to “multipoint”, but i still get some artefacts from time to time. I’ve already performed a factory reset, but it didn’t help.Is there any where to downgrade the FW to the previous version ?Thank you. 

Hi everyone, I’m having an issue with my web-based Morse code tone generator when listening through Sonos headphones and wanted to see if anyone here has experienced something similar. The website generates real-time audio tones in the browser using the Web Audio API. On standard wired headphones connected directly to my PC, everything works perfectly. However, when routing audio through Sonos (either via Bluetooth connection or through a Sonos device using line-in), I’m experiencing noticeable delay and, in some cases, complete silence after a few seconds.The main problem is latency. Morse code timing is very sensitive, and even small delays between dots and dashes make it hard to use for practice. With Sonos headphones, there seems to be a buffering delay that shifts the timing, even though the visual output on the site remains accurate. Occasionally, the audio starts correctly but then cuts out while the browser still shows the signal playing.For context, I’ve tested this in Chrome

We moved and i configured the two sonos moves [version 1) with no issues. My move version 2 doesn't respond 

I have changed nothing, have always been able to control volume on arc ultra through my nvidia shield remote and tv remote now after update i can only adjust it from the app when I use the other remotes I get the white light like usual on the soundbar but nothing changes, I hope this bug or issue gets solved quickly as it's annoying to go into the app everytime especially when youtube has a different volume than everything else and I have to adjust a lot

Casi todas las veces que enciendo mi sonos me cuesta que se activen los Dos, hay uno de ellos que se desconfigura y que tengo enlazarlo casi siempre suena uno y el otro muchas veces tengo que reiniciarlo y volver a meterle hasta la contraseña de wifi. Por otro lado saber si puedo conectarlo pre Bluetooth???? Gracias Moderator Edit: Translation by Google Translate-Almost every time I turn on my Sonos, I have trouble getting both speakers to activate. One of them keeps losing its settings, and I have to pair it again. Almost always, only one speaker works, and the other often doesn't. I have to restart the Sonos and even re-enter the Wi-Fi password. Also, is it possible to connect it via Bluetooth? Thanks.

Hi guys. This isn’t a query regarding the arc ultra as such but I’m wondering if anyone is playing MKV files from Infuse Pro. I can get audio via airplay from my MacBook Pro to my Sony Bravia tv/arc ultra but it’s not Atmos. Video will not play at all. I’m obviously missing something (apart from the knowledge what to do) but it’s getting increasingly frustrating. Without getting too technical (as I won’t have a clue) has anyone had similar experiences and/or solutions. Many thanks. 

I have a Sony Bravia 8. At first my tv remote was syncing with the Sonos Arc Ultra, but now it is not.  

I bought a new tv, Samsung the Fram Pro 2025, and connected it to my Beam 2 using eARC. I also have a Connect:Amp in my system that connects my back speakers to the system plus a Sonos Mini sub. I can´t get Atmos whatever I play on the TV. In the Sonos app I only get Dolby Digital 5.1.  I use the HDMI-cable that came with the Beam 2 and it is connected to the eARC-port on the wireless one connect box.  I have tried Netflix with a Premium account, a Prime and a HBO account and no Atmos. Any ideas what I can do to get it to work?

Hi, hopefully you can help me out here. I was able to connect my Arc, 2 Era 300s and the sub 3 in my network having 2.4ghz with WPA/WPA2 authentication as it is the bare minimum requirement. First step was connect my sub to a room, which is with my Arc. after connecting, it says that the Product is not connected. which is weird.I tried to setup the surround with my 2 Era speakers and Arc, still ended up with the same error message on both Era speakers. I have also added their IP & MAC adresses as dedicated devices under the DHCP list and still got the same error messages and result of not having all of them turned on.. except for the Arc itself.  Basically I did the LAN cable thing and yes it worked but I cannot affort to have my cable running across the floor as it was only a test. I rang up the support which they said its a DHCP issue, which I never had before after their upgrade of my sonos products recently.  

Is there a reason that my music library indexing in my Sonos S1 is becoming unreliable?  A couple of months ago, I noticed that new additions to the library were not showing up after indexing.  The bug continues, as I just copied several albums to my NAS drive, indexed the volume, and could not find any of the new items when I searched on any of the criteria (Artist, Song, Composer, Folder, etc.). After a couple of restarts and several re-indexing attempts, some songs/albums appeared in my searches, but not all.  The songs were all from the same copying-over pass, they were all valid tunes from Apple Music, and they were all .m4a files.  Nothing different between them, but some showed up and some didn’t.  I have now restarted my Mac and rebooted the NAS drive again, and done another indexing pass, and, finally, all of my most recent music files appear in my search.So, the question is: why is this happening, and is this the new normal for “old” S1 systems using a NAS? Thanks, steve

The proposal is to allow Sonos Voice Control (SVC) to forward voice commands to an external system via a configurable webhook.When a user issues a voice command containing a specific keyword or prefix (for example, “Home”, “Assistant”, or a custom wake phrase), Sonos would send the recognized text (or resolved intent) to a predefined HTTPS URL.This URL would typically point to Home Assistant, where the command can be processed further.At that level (Home Assistant), users and developers could: Parse the incoming text or intent. Route it to a custom AI/LLM or rules engine. Trigger smart-home automations, scenes, or complex logic. Build a local or hybrid AI assistant tailored to their own smart-home environment. Key characteristics of the idea: No access to Sonos’ internal voice engine is required. Sonos retains full control over wake word detection, speech-to-text, and privacy. Only explicitly opted-in commands (based on keyword or prefix) are forwarded. Communication is one

I have several ROAM and ERAs in my home system. One of my ROAM started playing at supper low volume. Maxing it out, either manually or through the app, it doesn't play at even half the volume as other ROAMs in my system. What could the issue be?

Hey all, I have 6 sonos speakers set up in my reception, but recently ive been having the issue of them unsyncing, and some speakers playing music whilst others arent. What can I do to fix this?

I am trying to follow the instructions here to add a Google Nest Mini in a room which has an old Play 1 for voice control.I can’t for the life of me add it in the Sonos app. Basically I get to the stage where I go into my Sonos app, General Settings add voice assistant. One of the devices on my system is an Arc, which has the ability to install / have Google Assistant. So when I select Settings->General Settigns->Voice Assistants->Add a voice assistant->Google Assistant it comes up with a prompt ‘select a room to add Google Assistant’ and presents me with the room with the Arc in.There is no option to add my Nest Mini. I must be missing something but for the life of my I’ve got no idea what I need to do.

We have had our Sono system for years and it's been great. We recently had a new router installed and I’ve been having troubles ever since.After doing some research online it looked like the wifi bands being synchronised may have been the issue as Sonos primarily operates at 2.4GHz. I have spilt the bands on our router and connected the Sonos and my phone to the 2.4GHz but I’m still having issues.Every time I try and play anything the error message “ Unable to play - network connection speed insufficient to maintain playback buffer” showsI have the two play 3’s and play 5 with a bridge but nothing is connected directly to the router as they are all quite far away from it Can anyone please help as it's driving me insane, especially as I thought I have cracked it! 

I’ve just spent 4 hours on both on the Sonos chat and then had to call to try and get my system up and running. I’ve upgraded my Vodafone wifi 6E router to WiFi 7 but can only get my 4 x ERA 300 speakers to work. I can’t get the Arc and any of my older speakers to work ie Play one (gen2) x 2 or play 3 and Play 5.At the end I was told no they won’t work as our speakers aren’t compatible with WiFi 7 except the ERAs. So I’ve now got a partly obsolete system. I would have expected to be told that within 5 minutes if that’s really the case not 4 hours later after exhausting every avenue. I also asked so if I upgrade to the Arc ultra will it work but apparently it won’t either , I find it hard to believe no one else has had this issue as im sure many people are upgraded to WiFi 7.Has anyone heard if Sonos are addressing this or anyone had similar issues ? 

Read online about Steven Wilson’s new HeadPhone Dust site that offers “pristine high-res & immersive audio”. Will Sonos support content from that website? From what I can tell, you have to play the audio through Plex, Infuse or Kodi. Offers high-res audio, 5.1 surround, Dolby Atmos & Binaural content.https://headphonedust.store/ 

Is it possible to pair my Denon RCD-M41DAB to a stero pair of Era 100s? At the moment it doesn’t register the speakers at all, I wondered if it might only be possible to connect to one speaker and not a stero set-up.