Troubleshoot, tune and get the most out of your system
Recently active
Youtube Music (uploads) searching is still broken… I’m unable to search my Uploads in Youtube music in the new app (works fine in the old app for my older Sonos device Play 5 that use the old app) Also if I browse my Uploads library instead i can only scroll so far then it just loops back over what i’ve already browsed. This makes finding or searching for that music in my Youtube Music Uploads library useless, and pretty much unusable to stream.
Are other able to use their playlist while at my house
bonjour je viens d’avoir deux enceinte era 100 j’ai reussi a les couplet avec ma barre beam mais le son ne sort pas des enceinte era 100 avais vous des conseil ? merci a vousps possibilité de prendre des photo de mon installation et imprim écran de mon application Moderator edit:Google Translate-hello I just got two era 100 speakers I managed to couple them with my beam bar but the sound does not come out of the era 100 speakers do you have any advice?thank youps possibility to take pictures of my installation and print screen of my application
My system was working well but recently only one of four architectural speakers connected to an AMP has sound? I have interchanged the wire connection and only the same speaker has sound.
I recently split my sonos system in two, one operating with the S1 controller and the second with the S2 controller. I continue to access my music collection on a NAS (Seagate Central) with the S1 controller, however with the S2 controller I am unable to connect to the NAS. The NAS is DNLA-enabled. I tried to connect using the same path that worked with the S1 controller. I also tried using the NAS drive’s IP address. Nada.I’ve seen some chats mention the ability of S2 to use more advanced SMB version 2, but I cannot see what version SMB the NAS uses, nor can I change it.I’m able to connect the new S2 system to Sonos radio, so it is otherwise working.Any suggestions for solutions or workarounds would be gratefully received!!I didn’t update my system to the new controller when it came out because I didn’t want the hassle that I knew would await me. Now I’m regretting the whole maneuver. What a waste of time. I’ve been using Sonos speakers for perhaps 15 years and love the sound, but I’m
I’m going insane I have an Arc, Sub and two Fives for surround3 Ports1 standalone FiveArc always works fine (Apple TV and never use the app on it). when I want to play music any where else Arc wants to be a Master or something. Arc will always play music even though I rarely want it to with the app. If I add or switch to another speaker it reverts back. It’s a constant cat and mouse game to get what I want playing. Often involving unplugging the entire HT setup. Now even that is not working and showing up. I think I have to reboot everything with HT unplugged to get the other speakers to play. I just went through and made sure everything was on the same WiFi. I have 2.4ghz and 5.0 as separate SSID. I made sure everything including phone was on 2.4ghz. What the F am I doing wrong. Starting to regret investing in Sonos. This is all bought in the last year or so.
Hi. I have a new Onkyo receiver and a new Port. I have the digital coax output from the Port to the input of the receiver, as instructed in the setup. I have an RCA output from the Line 2/B of the receiver to the Line In of the Port. I have the Port grouped with two OneSL speakers. I can see that the sound is going from receiver to the Port and the other two speakers; however, there is no sound output from these speakers. What am I doing wrong? I have done the global software update to all of my Sonos products.
When I first set up my Sonos 2 Do I have to be on my own home WI? Fi? To set it up. I am having trouble getting it to link and play music.
Every time I try to use this junk app I have to reset my speakers create a new system. Then it never finds them until I do it 5-6 times. Just when I think it’s working it randomly says can’t find system. But every other app I use to stream to them have zero problems finding. I can literally be listening to the speakers via any other app and the Sonos app just says can’t find speakers try again. Whoever is In charge of your app division needs to be fired. Why do I have to have an Internet connection just to use these speakers. These speakers are expensive and it’s not a huge ask to have an app that works. Sonos is quickly becoming a joke of a speaker system and a company as a whole.
Hello - I am trying to control a group volume from one amp. My setup is below:I have 4x Sonance 8” ceiling speakers wired in to an Amp (Amp A) in a media rack upstairs. I have this Amp, the ceiling speakers and Sonos Sub 4 in a room called “Kitchen”.I have a Sonos Move in a room called “Portable”.I have Pro-Ject Turnrable connected to a second Amp (Amp B) in a room called “Media Wall”.I have these three rooms grouped into a group called “Home”.Everything is working well and volume control as a group works well from the app.I would like to be able to control the volume of the group “Home” with the touch controls on Amp B. Is this possible? Thanks!
as the title indicates I have recently purchased and acquired. The ultimate Immersive Arc Ultra Set, which includes the arc ultra, a pair of ERA 300s and one Gen 4 sub… because I wanted a more thorough home theater experience. I went ahead and purchased an additional GEN4 sub, as well as a pair of ERA 100s. -firstly I was very disappointed in being unable to add the ERA 100 into the one home theater setup… I was only able to add the GEN 4 sub… I had to add the ERA 100s, As a separate group, which was then merged. Now they all work together when I watch TV. And although every couple of times I turn something on, sound will only come out of one of them, But that’s a different concern… My concern here is how can I Control the volume for my television with my Roku remote, such that raising or lowering the volume, does it to both the theater set up as well as the merged ERA 100s? — right now the only way to raise or lower the volume of both is in the Sonos app, Which is extremely frustrati
What the hell is going on with the playlist edit???is this feature coming back or what??? Why can’t I still create a playlist or edit the one I’ve been creating for the last 5 years???and what possible explanation is there for getting rid of such an integral feature??? I actually want an answer for this it’s bizarre
Can’t get my Sonos app / Ultra Arc to see my Sonos wireless headphones (WH1000XM5). Looking for advice.
Can someone please recommend a third party universal remote that will work with the ray soundbar. I've tried all the tricks and tips suggested but still can't get my Samsung remote to pair.
My two rear Sonos one SL surround speakers are connected but have no audio. The pause button works and will pause the ARC soundbar but still no audio from the surrounds. I have tried EVERYTHING please help. TV and cable box both set to Dolby Digital and TV surrounds are turned all the way up in sonos app and still no audio from surrounds.
I have a AMP with 2 speakers attached. The overall sound is not good for me as the equalizer is too poor. To have an acceptable sound i push the 2 levels at max … For such an expensive device it is a bit disapointing.To overcome this issue I would like to have an active equalizer between source and the Sonos AMP.I have found 2 options and your feedback would be greatly appreciated before shopping:Option 1 (expensive): i buy a Sonos Port and a EQ901 Equalizer from Deer Creek Audio. Setup would be:Sonos Port out → EQ901 → in Sonos AMP → speakers. I would manage music from the Port and the active equalizer from EQ901.Option 2: I buy an Bluesound Node Nano and the setup would be:Bluesound Node Nano → in Sonos AMP → speakers. I would manage music from my iphone via Airplay 2 (AM in lossless most of my usage way) and use the equalizer from the Bluesound.Makes sense ? Thank you in advance.
I got a new Sonos Roam 2 and it told me that I need to upgrade to the S2 Controller. It noted that I had an Amp that was not compatible and guided me to remove it from my system - which I did. Now when I go to my S2 controller, it says that the System is only Compatible with the S1 Controller, but when I go to the S1 Controller System>System Tools it shows “System Compatibility” greyed out and it just guides me to upgrade to the S2 controller. I am not fully going in circles. help!
Can I play Ace and Arc simultaneously? If not, why not?
Is there a way to adjust what the microphone will pick up? It’s almost impossible to answer a phone call on the Sonos Ace headphones if there is any background noise at all. The person on the other end can hardly hear you talk but can hear everything around you. A caller the other day could even hear my husbands flip flops while walking. Never had this issue with my Apple headphones so hoping it’s just a setting issue.
I have a brand new in box One speaker that I purchased about 6 years ago. I bought a bunch of them anticipating expanding at home and the office where I have it set up. I'm trying to set up this new speaker at home, i have no sonos products at home. I have sonos set up at the office This new speaker fails at the update stage of setup every time, regardless of wifi or wired. I get error 30 on wifi and 1014 with Ethernet. Any help would be appreciated. I'm using android with what I think is the s1 app ( doesn't actually say on the icon like it used to, but the icon is black) .
I’m posting this because of the repeated problems I’ve had my Sonos network and components working then falling off of my system. This is potentially a fix for many people out there. I have an Asus router, but many routers will use the 2.4Ghz and 5Ghz bands simultaneously WITH THE SAME SSID NAME. This will confuse your Sonos system, as well as many other WiFi connected devices. For me, my Arc would connect to the 2.4Ghz band and my 2 Era 100’s would connect to the 5Ghz band. While the components were all connected to the router, the fact that they were on different bands did not allow the Sonos network to connect to all 3 of them. What’s more infuriating was that if all 3 coincidentally connected to the same band and were set up on a Sonos network, the router may move 1 or 2 to another band at a later time and the Sonos network would show those components as disconnected or missing or in Sleep Mode or powered down. THE FIX:Find the WiFi settings on your router that “combine” your 2.4
What am I doing wrong? Sonos used to work for me, but in recent history, anytime I attempt to use it, something goes wrong. It will play random things and not what I put on, it will freeze, not respond and generally be unusable. Is this the new normal?
Why is the app so slow
as the title clearly indicates upon the successful addition of the Sonos boost to my home theater set up, it is not shown as a device with options under system settings. it’s all shown here in this iCloud photo link. The first image is upon the successful addition and the second photo is upon the closing of the window that says that the boost will be displayed in settings.https://share.icloud.com/photos/0b4ORyJYCPum9Xq3ylOlQud8Qit is very important to me that I am able to display and change the settings for the boost so that I know that it is functioning correctly and that I am able to use it correctly. — Although all indications suggest it is working, I have evidence that it is not because all devices are still connected to the wireless network and not the Sonos network. But I am not 100% That it would not be connected to my wireless network.please help and if it was never a device fully integrated into the second version of this application; Sonos please add it completely
Anyone’s Sonos app stop just stop working? Asking to update and finds speaker but wont connect. Why, tell me why Sonos HAS to use WIFI instead of Bluetooth. It creates all sorts of problems.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.