Troubleshoot, tune and get the most out of your system
Recently active
Hi everyone and welcome especially @Corry P .I just want to report two low prio bugs of the Android app. (iOS everything fine)1. edit view of alarm clock settings shows am/pm instead of 24h view for DE users. 2. EQ settings of Beam2 (I don’t know if other ht devices also are affected) show a balance slider, but it has no effect. …latest android app and firmware…
A quoi sert fondu enchaîné Moderator edit:Google Translate-What is crossfade used for?
Bonjour , je ne peux pas écouter de musique avec ma deuxième enceinte symfonisk car il n’y a pas de contenu dedans Et je ne sais pas comment faire pour en rajouter Moderator edit:Google Translate-Hello, I can't listen to music with my second symfonisk speaker because there is no content in itAnd I don't know how to add moreModerator edit: combines posts
Just cannot get the android app to connect to my shared pc drive. Read all the posts and help notes.None of it works. Tired of this.
My NAS music library shows properly on the latest iphone, android and Windows apps.However, when adding surround speakers (2 Sonos one) to my playbase+sub setup, the library stops showing up in the iphone and android apps. Removing the surround speakers will make them show up again, so it’s 100% replicable.This didn’t happen with the former apps.The Windows app keeps on showing the libray and working properly all the time.Haven’t seen it reported, so I thought it would be interesting to share
Hi Sonos Team, I recently purchased a Sonos HD Radio subscription and am impressed with the audio quality and it’s fantastic! However, I’ve noticed that the service announces the station name in between songs. While I understand the intent, this feature can feel a bit disruptive in certain settings, like when hosting guests or a party. Switching to Spotify avoids this, but it does make me question the value of maintaining both subscriptions. Is there a way to disable these announcements for a more seamless listening experience? Thank you for your time and support!
I’ve been using my Sonos system primarily for music, but I’m now setting it up for home theater use. I’m looking for tips on how to get the best sound quality for movies and TV shows. Specifically, what settings or configurations in the Sonos app should I adjust for enhanced surround sound? Any recommendations for additional Sonos components (e.g., soundbars, subwoofers) that would improve my home theater experience would be greatly appreciated
I’ve had two Sonos sl 1 speakers for about two years and I’ve hardly ever had them both working.I have one in the kitchen and the other one in the living room. I constantly have to sort out one by doing a reset I’ve also rang up someone at Sonos who got both working for a while. Now if I get say the kitchen going the living room one stops working it seems I can only have one at a time working could someone help please. I want to subscribe to apple music and get a roam but won’t until I get this sorted.RegardsBruce
I have a Beam and 2 Sonos Ones all on S2 app. When I try to add sub mini it keeps saying that the system has been added but may not appear... But it never appears. Have reset the mini and tried to add it on multiple times via phone and tablet but no joy. Any idea how I can add it?
Anyone else noticed how slow and unresponsive the App has become today Dec 23rd 2024? Much worse than the usual sluggish performance we have become used to.android App Randomly losing connection with the playersMore than 20 seconds to pick up what’s playing and before anyone jumps in , no its not my network , these are ethernet connected devices and I have a strong Internet service 70mb/s with no competing web traffic. If prior years problems are anything to go by I am not looking forward to entertaining guests on the 25th as new users plug in their sonos gifts for the first time and try to register. Please Sonos ditch this Cloud based App solution and give us back direct control of our own equipment.
Hi guysI’ve just treat myself to a new TV and the Arc Ultra. They are in my lounge which already has ceiling speakers with amp ruuning them. When I’ve set up the Arc, it connects to the TV fine and then i add the amp as the surrounds which works but then no sound comes out of the ceiling speakers. It’s the same when i try and play music or the TV. I’ve tried all sorts and also spoke with SONOS via live chat and they have advised me i need to change my WIFI to a mesh system. Is this the only way around this issue? I have a beam and amp with ceiling speakers in my Kitchen which works fine. ThanksRob
Since Yesterday I have lost Partielly then completely all connections to Google assistant.It stated from 1 of my Sonos One, then it extended to a Roam.... I restarted my router and all devices but no joy.It king of worked with e Roam for a minute then went south again after I reconnected a One...Removed all links to Google assistant in Sonos and Google Home.BTW, Google Home only sees a few Sonos devices, not all of them.... Odd.I have then tried to add the service back but it just never manage to do it First attempt after phone reboot takes me to home assistant config and it ends-up not finding any device.If I try again, the Google assistant never shows again, there seems to have a hidden window of it but nothing I do can make it show. I tried this on 2 different android phones, same results. I am now stuck with no assistant at all. Alexa won't activate and So is assistant just did not want to finalize the setup either..… Seriously WTF is goi g onnat SONOS. The giant connected speaker
Have had a sonos system for close to 10 years, never had an issue until this new app upgrade. I can connect the Sonos Move and Roam without any issue. Everytime I open the app they are there. As for the 3 off Play 1, Play 3 and the Playbar. I am now well sick to the back teeth of the system finding the speakers after I have reset them then sometimes they connect and then just disappear. For the first time this very evening, and trying to connect the Playbar, it does the same procedure, after a reset, the system finds the Playbar, it connects and finally joins to the network, all good, it then it tries to an update and for the first time I get an error message which says that the speaker is connected but wont show as the update as not worked and until the playbar is updated it wont connect.No idea now how to resolve this issue. I am hoping it is a simple fix and that this will help with the other speakers connecting.
I know this has come up before but having followed all the suggestions and apparent "solutions" I'm still stuck with this issue. And I am going to give a far more detailed breakdown of what I've tried/what I am able to get to until I hit a wall and I definitely haven't seen any of this info elsewhere (I did look all over, both here & with Amazon)I have not been able to properly link my Amazon Music Unlimited subscription - I can't manage the library, I can't search/add to library/like or dislike etc, can't control playlists. It does show me my library and I can keep it playing (because in the backend, somewhere, it must show I have a subscription) but basically it's linking a "Prime Music" free or stripped-down version because it's linking to an American Amazon.com domain, and I DO have an Amazon.com account (I was on there back before they even had a UK domain to speak of) and I am also an Amazon Prime member in the UK. This covers audible as well I suppose - I unlinked Audible an
Wieso kann ich beim One das Mikrofon nicht mehr einschalten? Moderator Edit - Translation by Google:Why can't I turn on the microphone on the One anymore?
My Sonos Move has gone to sleep mode and can't get it on. I'm in a different location with a different network. How do I factory reset from my Android?
Is it possible to have more than one system owner for all sonos devices in the house? If so how do I do this?
Ik heb een Marantz model CR611 die ik graag zou willen koppelen aan mijn Sonos one speakers Iemand een idee welke mogelijkheden er zijn?
I have a Sonos Beam gen2 and a Move Gen 1. I’d like to use them wireless with a Pioneer DJ PLX500 turntable ( RCA output ). At the moment Beam gen 2 is connected via optical cable to a LG Tv set. Thanks for your help
Hi,When headtracking is enabled, the LED does’nt work.Any suggestion please?
So I had to replace my network switch as it failed. I have 4 Sonos Connect devices (one Connect Amp and 3 Connects). Historically I had one connected to the Switch and then the other 3 daisy chained via cat5 cables. All was well. Now my system “isn’t found” on the network. After trying a bunch of things I decided to hard reset each device (pressing mute/volume up button when powering on until orange light flashes and eventually solid green). I then reset my app and started from scratch with just one device at a time. However it is still unable to find my device. I can see on my Router that the Connect Amp has an IP address so know it is connected. But adding a device via the app and going through the “power on” just keeps saying no device found. Any ideas?
I use Pocket Casts as a mobile app and on Sonos. On the App I get UK relevant Ads, but on SONOS I get US relevant (UK irrelevant) Ads. Is there any way to switch that? Can't really be doing it for the advertisers!
Bonjour,impossible de connecter l’app Sonos de mon iPhone sur mon système ! Quelqu’un a-t-il déjà eu ce problème?
Hi all,Hoping someone can help. I have the sonos arc ultra, roam 2 and three of the era 300 speakers. They all set up fine, connected to wifi etc, and Alexa works fine. However, if I try to add sonos voice assist I get an error message saying that there is “still a problem adding Sonos Voice Control.” This occurs on all devices. They are all showing up as connected to the WiFi. I’d prefer to use the sonos voice control over using Alexa for privacy reasons, and it’s really frustrating me! The app was only downloaded yesterday and is definitely OS S2. I’ve tried rebooting everything, mics are on, Alexa works perfectly. Not sure where to go from here.Thanks!Charly
I just bought 2 Sonos 100 era speakers I want to use with a vintage Realistic amplifier, which is already hooked up to a vintage turntable-all working fine. I understand I need the Sonos inline adapter BUT I can’t figure out what RCA cord I need and where to plug it into the receiver. I’m seeing cords like a splitter with four male RCA plugs and a single 3.5mm jack that I thought might work. But then reading a few posts talking about using ‘Tape out’ port? Now, I’m just confused. Bottom line is to achieve stereo sound. Ive included pics of the manual. Any help would be appreciated!
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.