Troubleshoot, tune and get the most out of your system
Recently active
Despite spending lots of time on the phone to the retailer’s help desk, and searching every avenue, I’m still getting GMT time zone instead of New Zealand (GMT + 13 hours). I’ve read that Sonos app automatically changes zones but not for me. The local Sonos help desk is ‘off line’ and the website offers no help to a non-techy like me!
As it stands I am still missing a large number of Sonos custom playlists on my Android device. I have an Apple device and can see all of the playlists within the app on this device. I can also see all of the playlists within the Windows desktop app. The issue is related to the Android version of the app. Has anyone else come across this or found a resolution? My only work-around which actually didn't work was to use the windows desktop app, and add the missing playlists as Favourites. This shows the name of the playlist on my Android device but does not play the songs within it. Does anyone know if a fix for this is even on the road map? Or do I have to just use an IOS device to play SONOS content comfortably? This is really frustrating!!
Feature request:From today’s firmware update on my system….When an update fails, is it possible to include the name of the device that failed? When I went back, an hour later, to run it a second time, it told me one of my Subs hadn’t updated properly, and I needed to run the update process again, which I did, and was successful. So apparently there is some data existing that identifies which device didn’t update properly, or it wouldn’t have shown me the Sub needed updating. All I’m asking is to show that data at the ‘update failed’ time, in addition to the current ‘this device needs updating’ time. If it matters to anyone, I did run a diagnostic after the failure part. But not one after the success, since I’m not sure it would have been helpful.
I have a stereo pair of Ones grouped into a room with a Sub Gen 3. When I start a new track / stream manually from the Sonos app, or from Alexa, Amazon Music or Plex the track starts playing on all speakers, then about 1-2 seconds in the Sub stops whilst other speakers continue. The Sub then starts playing again about 5 seconds later for 3-5 seconds then cuts out again for a similar period. After approx 25 seconds the sub plays as expected. This only happens when staring a new stream from somewhere. Once the stream is playing then the Sub maintains its connection ok, so symptomatic of a failure to buffer audio data successfully. I tried switching all 11 of my Sonos devices off Sonos Net, assigning static IPs, factory resetting the Sub, joining in different groups. Even using the Sub on its own exhibits the same behaviour. The speaker is approx 4ft from a mesh network node, so I'd feel 95% sure that this is a Sonos problem rather than anything to do with my network. At this point all I
Can I use a echo pop on my sonos play5 gen 1 ?
Does anybody have any experience with this enclosure/mount for the Era 100? I would miss access to the touch controls, but it looks like a neat way to make the speaker unobtrusive.I’m curious about the sound quality of the Era 100s vs. the Amp with the in ceiling speakers.
I have been messing around with various configurations for connections with my Sonos amp and would the outcomes experiences and see what other users have done.My Current Setup:Sonos amp Project Debut EVO 2 Schitt Mani 2 phono Pre Amp Tangent CDII RCA switch box to feed both the Evo & Tangent in via the RCA line in on the AMP. B&W 606 Speakers (These occasionally are set as surrounds for an ARC which is my main TV sound output, but are predominantly for music use only)This has been my setup for the last few years and i was very happy. However, I recently upgraded to the Project EVO with the Schitt Mani 2 from a Project T1 phono with built in pre amp. When i did this I found I had to adjust the line level down to 8 get the best sound from the turntable, but would need to increase it back to level 10 for the CDII. Much as I love streaming I still enjoy active listening on physical formats so want to get the best setup for all my listening needs. So i did a little experiment usin
Has anyone had luck adding their music library from a Synology NAS with DSM 7+ to a S1 configuration? After Hours with L2 support they finally told me, oh it wont work with DSM 7, you may want to downgrade back to DSM6. I just want to see if anyone out there has been able to add the music library under these conditions.Thank you, Mike
Hi, I’m really hoping someone can help as this is driving me crazy! I have a very simple setup in my office. Internet comes into my office into a TP-link AX300 router and then use a deco XE75 pro mesh network for the wireless. Wireless is turned off of the TP-link AX300 and the Deco is in wifi router mode. I have a single sonos era 100, wirelessly connected to the primary deco in the same office, only a few metres away. Signal is therefore very strong. The problem is that spotify keep randomly pausing for 5-10 seconds and then restarting. This originally started with a sonos one gen 2 towards the end of last year. I decided to sell and replace with the sonos era 100 and all was well for a couple of months but the same problem has repeated itself over the last week.Updates are up to date on the Deco mesh and on the sonos era 100. I’ve tried reading around this for so long and toyed with so many different settings/options that I honestly don’t know what is right and not any more!In the s
Hi All,I have recently upgraded to an Arc from a Playbar.I have an LG TV that's 4 years old but has an Arc port, I also have my Sky Q box connected via HDMI to the TV.I believe I have followed all of the setup instructions, however, only half of it seems to work.When I tell Alexa to turn on the TV she does but not the Sky box, I have to do that manually. However, when I turn the TV OFF manually it turns both off.When I ask her to turn off the TV I get the start and end notifications but nothing happens.Room is:- TV Room and has Arc, 2 play 1’s and a sub, Arc & TV have Ethernet connections, Port from Q box is HDMI 1, Arc is in the HDMI (ARC) port.Thoughts and possible solutions gratefully accepted. Martyn
Updated Sonos iOS app to 80.15.04 and did the system update. After system update completed successfully, the system is no longer found on the Sonos iOS app. Tested it on an iPad with previous version of Sonos app and that doesn't work either. However, I am able to manage my system using the Windows app without any problems. Checked privacy settings on my iPhone for Sonos app and network, bluetooth and local network were allowed.Rebooting phone did not make any difference. iOS version 18.2.1. Rebooting router didn't help either. Reinstalling the app did work. After the wizard it chose to connect to existing system and it worked instantly, so it's probably something with permissions for the app.
I’ve just purchased a new Sonos Roam 2, My Sonos app found it straight away and added it to my system.I’ve added the Alexa voice control and the Sonos skill to Alexa app also the BBC Sounds Skill.I’ve added the BBC sounds service to the Sonos app.When I ask Alexa to play BBC Radio 2 for example it selects BBC World Service West Africa. I can select Radio 2 from the Sonos app with no problem.
As of November 20, after a long power outage of 12 hours, I noticed the following:Google Assistant (GA) vanished - first noted with inability to turn on microphone, verified on Sonos App, on the Sonos Beam Gen 1. Any attempt to re-add GA via either android or ios fails with different symptoms depending on the OS. Android will not be able to locate any google assistant capable device in the ‘google assistant’ phase post linkage (SSO/OUTH) between google ↔ sonos; IOS will get there error message ‘There may be a problem’. Verified no former linkage exists in Google Home. I added / removed the SONOS voice control successfully so the Beam is not mechanically challenged.I’ve reviewed threads, cleared the beam to factory defaults and rebuilt, rebooted the router / sonos devices, all to no effect. All Sonos devices and controller are up to date. Still, no ability to add Google Assistant to the beam.I’ve seen an email thread from three months ago that the GA feature / addition is curr
Hi Sonos Community,I’m having an issue with my Sonos Arc when streaming Dolby Atmos content via my Apple TV 4K. The audio intermittently drops out for 1-2 seconds during playback, especially on Netflix and Disney+.Setup Details:Soundbar: Sonos Arc Streaming Device: Apple TV 4K (2nd Gen) TV: LG CX OLED Connection: eARC enabled with HDMI 2.1 cable Network: Strong Wi-Fi connection with no noticeable interruptionsTroubleshooting Steps Tried:Ensured all devices are running the latest firmware and software versions. Replaced the HDMI cable with a certified Ultra High-Speed cable. Adjusted Apple TV audio settings between “Auto” and “PCM” modes. Reset both the Sonos Arc and Apple TV, but the issue persists.Questions:Is this a known issue with the Sonos Arc when handling Dolby Atmos via eARC? Would switching to a wired Ethernet connection for the Arc improve stability? Are there specific settings on the Apple TV, LG TV, or Sonos app that could resolve the audio drops?Any advice or insights woul
I have a beam & move speakers which I connect to via a Sonos port. I want to play my Brennan B2 and my Pro Ject Primary E turntable thru my Sonos port. I have purchased a Pro Ject Phono Box MM and a Prozor bi-directional switcher plus all the relevant cables to achieve this. I just need to set it up correctly - HELP!!!Moderator edit: edited for clarity
So I have a Move 2 for my garage home gym and I’m looking to add a pair of Era 100s and a sub mini to the gym for music only. I know I can’t pair the Move 2 in stereo with the 100s and sub mini but can I pair the 100s, sub mini and move 2 all on the app to play the same music at the same time? I don’t need left or right stereo setup, I just want more sound with some bass for working out. I love the Move 2 but I want more but I want to make sure they can all be paired on the app and play together at the same time.
I have a pretty extensive Sonos system throughout my home. The sound quality and volume on a gen 1 play 5 has deteriorated lately. Lower volume and distorted sound. I performed a hard reset with no improvement. After the reset, I could not trueplay tune it as it repeatedly noted an error msg. about background noice. There was no background noise. I tried a dozen times, no success. I’ve read about various failures of this speaker and whether or not a fix is available. I’d appreciate any advice on a solution, or is this expensive speaker now a brick? i think I might have sent this speaker back to Sonos once before when it was nearly new for the same or another issue, not sure. Thanks, Mike
I have S1 on a new M4 Mac Mini running MacOS 15.2 with music library on an SSD - Sonos will not recognise the library. I’ve been using Sonos for 15 years on various Macs fairly successfully, but if this isn’t going to work with my new environment I'm going to get rid of all my Sonos equipment and live a happy life. Anybody????
Hi, i don’t need my boost anymore and I want to sell it. How can I reset it?
Hello! I use my Arc Ultra connected to my eARC BenQ TK710 dolby atmos capable projector. I use an ATV4K 2022 edition. Very often whenever I want to stream Atmos content on any platform I get no audio at all! The Sonos app shows no audio! If I force the ATV4K to play DD5.1 then it works again! Or If I leave it on Auto, Atmos on then the 5.1 content reads Stereo PCM on the Sonos app. Is this happening to you? I have changed cables..I am using Ruipro 8K fiber optic cables 25 ft the green ones and still the same issue. I have to disconnect the Arc from power and plug it back in for it to work again with Atmos.
I am looking to potentially connect 2 beam sound bars to one TV is there a viable way to do it?I was going to use an HDMI splitter into the Earc and told that may or may not work.Any feedback is welcome as it’s not my area of expertise.thank you
https://www.yahoo.com/tech/victrolas-sonos-compatible-stream-onyx-150000635.html New colors for the Onyx model, plus an upgrade to Bluetooth and Vinylstream Wi-Fi support. I have checked with Victrola, and the upgrade will be retrofitted to all Victrola Stream models and is coming some time in February.
What is the best way to connect a Port so I can feed my CD player, turntable and Sonos music into my hi-fi system AND link these sources to other Sonos speakers in the house?
Hi, I’m looking to use BT headphones by connecting my Port to a BT transmitter. I’m not sure if there is a cable to do this or if I need to buy a converter? My transmitter has a digital optical Input but the Port looks like a Coax Output. This is new to me so trying to avoid ordering the wrong part.Any product links appreciated.
Hello, This is Roin from Republic of Georgia,I’m interested in purchasing your products but found out that you don’t offer a delivery to Georgia, is it possible to add?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.