Fix & Optimize

Hi, Has anyone noticed there appears to be a bug with the Sonos app / Sonos Ace Noise Control functionality?  Selecting the noise control options with the Sonos app on Android does not change the mode on my Sonos Ace headphones.  The function can be changed directly on the headphones and reflects in the app when it changes, but it cannot be changed from within the app itself.

Hi all,I'm not sure if this issue has been reported before — I couldn’t find anything similar after searching.I’m using a Sonos Era 100 speaker for Microsoft Teams calls on my HP EliteBook 630 G10, connected via Bluetooth.The issue arises when I answer or start a call (either incoming or outgoing). While the ringing sound plays normally, once the call is connected, there is often a delay before I can hear the other person, or sometimes I hear nothing at all, regardless of how long I wait. In those cases, I have to end the call and try again.Additionally, Teams chat notification sounds are inconsistent — they play only sometimes, almost as if the speaker is in sleep mode and doesn’t always "wake up."I’ve already tried several things, including disabling Hands-Free AG Audio, perform all the updates etc. but the problem persists.I understand the Era 100 isn’t Teams-certified, and otherwise it works great (especially for music), but since I work from home, a reliable Teams experience is es

SO I have an Ultra Arc, 2 rear ERA300’s and Sub.My question is, Sonos doesn’t support DTS:X so what happens when you play DTS:X content?  

We recently purchased Polk wired speakers for our outdoor patio setup, but when we try to play sound from the tv through the speakers, the sounds comes out glitchy and cutting out. How do we get this to stop and get sound without the glitchiness. When we play music through the speakers from our Spotify or Sonos app we do not have any issues with the sound.  The sound has been run out of the tv via HDMI and optical cable, into the house and down to the basement where it is then connected to the amp. 

Beam Gen 1 connected to HDMI2, eARC port.2x One SLs setup as surroundUsing official sonos HDMI cableWIFI connection to BeamEthernet cable to TVthis setup worked fine with 43” LG for last 5 yearsupgraded this week to a 42” OLED LG C4, fresh out the box.No DVD, Bluray or STB. Streaming apps only. Soundbar receives Dolby 5.1 from onboard Apps - Netflix, Amazon Prime, Rakouten, Now TV etc. as expected. Sounds good… except every second appears a lag or drop in volume. Happens no matter what the streaming app being used.Tried all the Sound Format settings, eARC on / off, CEC SIMPLINK on / off, changes to Auto / Passthru / PCM, changes to digital sound format MPEG/DD5.1/DD5.1+/HD ACC something / AutoProblem only goes away when output format is set to PCM. But then this is only Stereo 2.0, losing the surround etc.Haven’t tried Optical yet, because I can’t find the Beam adaptor. May need to order one onlne.Tried turning everything off 2 mins, on again [at the wall, not standby]. 

I am on version 16.1 and I have not updated the Sonos app since the major meltdown with the release in May of 2024. I have seen all sorts of posts on the web as well as within the forum but it all gets complicated to know for sure whether I can finally come out of the woods and count on Sonos to deliver.My music is ALL on my local Synology NAS. I use PLEX to select from my nearly 1,000 playlists. I am in the media/radio business so it’s all part of my deep and robust library to fit my whatever mood.  I NEVER stream using Spotify, iHeart Radio and other streaming options.  I have all the music I want and need and continue to add to my library.  If the group could confirm my questions/concerns below, I would be grateful. And if you can share any screenshots of areas showing that it’s working, that would be appreciated.Will my local library show on the latest version of Sonos? Will all my playlists currently available on my Sonos app show up on the latest Sonos version? Does selecting var

Hello - is it possible to connect my Sonos Move 2 to an existing S1 system? My current system only has S1 components (all connects). I recently purchased a Move 2 but it seems as though it cannot be setup using the S1 controller and asks to use the new Sonos app. When going to the new Sonos app I cannot add it either because I cannot join my S1 system via that app. Please let me know! 

Hi,New Sonos user here, just bought an ERA 100.  Have it all configured the way I want it, sounds great, but am having a problem with personal playlists with Spotify.  Spotify is connected just fine, I have a premium subscription, I can play anything I want through the Sonos with it using the Spotify app, BUT it seems to have difficulty finding some of my personal playlists using voice commands.If I say “Hey Sonos, play ______ playlist from Spotify” it works sometimes, but other times it ignores personal playlists with the exact name I gave and and jumps to some other playlist (not my personal one) that has a similar-but-not-the-same name.My list names are not complex.  For example, “Female Vocalists” works fine, but “Dance Music” does not.  Asking for the former results in hearing that playlist, asking for the latter results in playback of a similar playlist from somewhere else on Spotify.The interweb thinks there’s somewhere in the app one can go to manage playlists, I see that for p

When I ask Alexa to play a song it says that device is offline but I can play songs using the Spotify app

I use m3u playlists created elsewhere to play my SMB shared music on Sonos.The playlists are imported/added through folder add in library.All files are on the same share, in the same folder structure.The playlists are added properly as far as I can see in the (Windows) desktop app and it plays fine when I hit shuffle until it stops randomly. I can see (on screen and in the useless help/log) that Sonos desktop app thinks the share does not exist (or the file, the wording points to the whole share) "Unable to play XX - the share //XX does not exist".It was playing just fine until this. So I hit play manually on the songs it thinks it cannot access and sometimes they play right away, sometimes Sonos keeps stating the same error for a few tries and then plays it anyway. I’ve also seen it playing a file while simultaneously saying that it cannot play it because the share does not exist.What is this? Is there any better logs than the help/error log that says almost nothing?Just to weed out s

Why do i have to appeove my YouSee account on Sonos every second day?? If i dont do it i cant play music. 

Just pulled my old pair of Play 5 Gen 1s out for a listen. They still sound so good.  Does anyone know if they are capable of playing a lossless stream from Apple Music?  I’m playing it but there’s no “lossless” logo appearing as it does in the new Sonos app when using a compatible speaker.  I found a list of Sonos devices that don’t support lossless and the Play 5 isn’t on it so I assume it can support it - I’m just unclear whether it’s actually playing lossless due to the lack of the lossless logo.  EDIT - I’ve confirmed that Deezer HiFi is supported as you can see the track format is showing as FLAC.  Here’s the list of devices from Sonos: ”Can all Sonos products stream lossless audio from Apple Music?Most Sonos products can stream lossless audio from Apple Music. However, some older products don’t support the required streaming protocol (HLSv7) and will stream audio at a lower quality. The following Sonos products won’t stream lossless audio from Apple Music:Connect (Gen 1) Connect

Arc Ultra soundbar is my first Sonos piece. I cannot use it because it keeps demanding I sign in as system owner.

My system is a Roam, OneSL, Play:1 and Connect.  All four appear in the app and disappear, reappear if I recycle the power on an individual unit. For some reason both the OneSL and Play1 are no longer able to play. When I select a source on the App I get “Couldn’t play content, try again” and “something went wrong” This has only occurred recently, but can’t identify any specific date. Nothing in my network has changed.Both the Roam and connect perform as normal. Any clues?

Hi,When playing music from the the Sonos App on Apple Music, I keep encountering connection issues - songs not being able to play or skipping or play halfway and skip…This issue happened last year, with one of the App update, this issue seemed to be resolved for the most part until recently. Recently, I have not been able listen a full album or playlist on Apple Music. The issue appears to be more severe when playing Dolby Atoms format, but also happens to other lower quality formats too. Only when playing on Apple Music.I tried remove Apple Music and re-add, reset my systems etc. Not helping. Contacted Sonos support multiple times, they kept defer this to my wifi connection/interference, which does not make sense as this is not happening when playing music on Spotify.Anyone else experiencing this?

I have two Sonos Connects and two Sonos Amps. (4 zones). All managed by Control4 and all worked fine until I upgraded the C4 controller to a Core3 and at the same time upgraded the C4 OS from 3.2 to 3.4.3. Now volume control of the Sonos Amps is fine, but volume control of the Sonos Connects does not work. The Connects go to either 100% or 0% when voluyme is adjusted. Both Connects line out settings are ‘passthrough.” C4 had no solution. Any ideas. The Connects are worthless in their current volume control state.John

Apologies if this has been answered but I can’t seem to find the exact answer.   I’ve built a golf simulator in my basement and wanted to place a Sonos Soundbar behind the screen for audio.  Can choose from either Sonos Playbar or Sonos Beam if it makes a difference.I have a media cabinet built into an adjacent wall about 20’ away from where the soundbar will be.  Media cabinet will house golf simulator computer, gaming systems, Apple TV, and an AV Receiver.   Can I use a Sonos Connect or Sonos Port with the AV Receiver audio output to connect to the Sonos Soundbar to play the audio from whatever the media source is?  Or how can I best connect the Sonos Soundbar to the AV receiver recognizing they are kind of duplicative in function.   thanks, 

Have connect my Beam 2 to my Samsung QE55Q90TATXXU via the HDMI ARC socket.  The problem I have is that the TV automatically plays through the Beam even if the Sonos app is set to TV auto play off. When changing the audio source to TV speakers it automatically switches back to the Beam which I prefer not have when just watching stand TV programmes. Any idea how to change this. TIA

So my beam is all set up with my tv. It looks like it’s playing sound but it’s not.i have a Samsung tvi can play music from the beam through the app but I can’t get any sound from the tv.please can anyone help 

I have just purchased a new Sony Bravia tv and attached my arc ultra to it. The sound is great until I switch off the tv for maybe 10 mins or more. When I switch the tv back on after this short period, there is no sound coming through on the soundbar. The only way I can resolve it is to switch off the power on my arc ultra and switch back on again which seems to work until the next time. 

Cannot get Alexa to play music on my Arc Ultra via voice command 

Hi I have recently updated my wifi router and have since came up with issues regarding my sonos playing. I have updated all my speakers and my WiFi is connected to the speakers but if I ask Alexa to play the radio or play my amazon music or a song Alexander announces it is going to play but nothing ever plays. Everything works as normal if I play through the app egg Spotify it will come out the speaker then but I am having issues regarding them playing anything when asking it to do so. Can any1 help please

My morning alarm has become increasing unreliable. I have a Sonos One in my bedroom. Recently, I was getting chimes more often than the music I had set up. I tried all the basics before resorting to a total rebuild. I have 14 Sonos speakers - the oldest are a pair of play:3 from 2013. I unplugged everyone. I unplugged my router and range extenders. I factory reset every speaker. Factory reset the router and range extenders. Set up the router and range extenders making sure latest firmware and keeping most default settings. Once I was happy wifi was working, I created a new Sonos account and added every speaker. All good. That was a week ago. Since then my daily wake up alarm has worked once.I have Spotify family plan and we have an unused account which is only used by Sonos for alarms. When I play directly from Spotify App the music plays. When I pick the Spotify service in the Sonos App, it plays. When I create an alarm one minute in the future and test, it works.Sonos One Hardware Ve

Hello, what does error 1066 mean, please ?I reset all my speakers (system suddenly not found), and this message appears when the update check begins just before the speaker installation process is complete and I have no choice and I have to leave the configuration.PS : I haven't changed any of my network settings. The message of my screen capture in english is : A problem occurred while checking for the update. 

I tried searching for the topic posted, but I couldn’t find any assistance to my specific problem.I have a Onkyo TX-NR6100 and a Sonos Port. The setup was easy on my 20 year old Denon receiver, but sadly that died, and I saw the “Works with Sonos” on the receiver I purchased thinking it would be a simple replacement. But I cannot figure out how to  get my Turntable or local radio stations to play over the ERA 300’s I have.  The local radio station is important because our son has a radio show for a local radio station that doesn’t have any sort of app or live streaming, we would like to stream it so we don’t have to listen to it on a little portable radio, or buy anything else. My current setup from a search is as follows:Port input connected to Zone2 OutputCoax Digital in port connected to Coax Digital In on the ReceiverTurntable connected to CDZone 2 is turned onCoax Digital is set to CDI called Sonos support and they only showed me how to connect the turntable to the port, which I a