Components and Architectural

Hello, I have several Sonia products and have always worked just fine. Recently had a broadband issue resulting in change of password. All other WiFi de vices have updated including Sonos products, except Move and high is “missing”. I’ve. Even through the find missing products section many times and cannot get to connect.  any help would be appreciated. 

Hi, I have a Sonos beam and 2 Sonos ikea lamps, I have an issue where when using surround sound the surrounds keep cutting out briefly then coming back, I bought a boost to improve this and it did for a bit but now the issue has returned, I have removed the surrounds and readded and restarted the boost but this is still happening, does anyone know a fix for this? Thanks in advance🙂 Diagnositcs code 93151066

This is becoming a huge deal and it is really annoying. Just about every time I am playing music through Airplay to a Sonos speakers the music just stops being heard. The music is still playing in the app, but no sound from the speaker. I open the Airplay button, switch back to play on iPhone then pick the speaker again. It first tells me the speaker is unavailable then I pick it again and it plays from the speaker again. It might work for two songs or stop again. Very random. Anyone else having these issues. system is tens sonos speaker mix.   airplay played for IOS (Phone, Ipad).   I have disabled bluetooth.  Didn’t fix anything.   I followed apples recommendation to reboot (ha ha).  I use airplay other devices devices that are not sonos and have no problem, only occurs with sonos devices.

I’ve had  My Sonos since 2019. All of a sudden there is static and sounds like in and out on Radio.  Diagnostic :  1714425429

Why does the alarm sometimes select to play a different radio station than the one I have told it to?  I want it to play DR P4 but often it plays a commercial station instead, and I think it is The Voice. After all they are both danish stations. But it is very annoying. 

I would like to play music from Spotify or Youtube on my iMac on my Sonos One ( Gen2 }If I select System preferences on the iMac for sound it says there are no output controls for the Sonos.Must be possible surely ?

I just received my new Roam speaker and I have to say this was a horrible purchase and experience.  I run two SONOS systems at two different homes approximately 20 Sonos speakers in all.  One home is an older Sonos system running on S1 and the Roam is on the other house which operates S2 with S2 compatible devices.  The speaker will not always connect and when it does it connects for 20 seconds and then shuts off. Upon researching the issue online this is a known problem with the Roam.  So disappointing.  I have looked on many discussion boards and the reviews are the same.  What a disappointment.  I will be posting additional posts regarding this issue and my unfortunate experience.  I have followed all of the instructions for resetting, restarting, uninstalling and reinstalling with no luck.  I would not recommend purchasing this product.

Hi there, i have a fire tv cube and beam connected to the tv however i cannot hear sound on the beam if i talk to Alexa, i can now only configure fire tv as main speaker in my living room group. Your confirmation number is: 1590570698. Thanks. Luca.

I have two devices, directly connected to the router with a cable. One of the devices drops at random, stops playing, and then after a while returns on its on. Sometimes while this happens the speakers make a loud clicking sound. I captured a diagnosis after this happened once:452604873. Thanks.

I have 2 Play 1’s, and they won’t connect.  Only one will connect and it says not compatible and tries to update me to Sonos S2 controller.  S2 controller won’t recognize the system and says it’s not compatible.   

My soundbar optical cable is making the sound glitch when watching films on Netflix ,amazon,ect YouTube and TV the sound is fine. They used to work fine together.  I have swapped the cables to a new optical line and it still does it. If I change settings to TV  sound it works fine but there is lots of delay between TV and soundbar. Please can any reply be put into simple english. I'm not computer savvy. Cheers all. 

For some reason the Sonos application shows my two Roam speakers are playing, but there is no sound coming from them.  I called Sonos support and they  nicely talked me through a solution that worked:Turn off the speakers. When off, push the power button and hold for six seconds.  The speakers will make a sound and turn off again. Wait 20 seconds or so. Power the speakers back up and they worked.Hope this helps someone.

Hi,I have a continuos problem with Sonos One which keep on disappearing almost once a week. When I restart it with factory settings it’s working again. But it’s pretty frustrating doing it every week…I have changed the location with no luck and a app function finding the missing sonos doesn’t find anything.  Any help?

I have 10 play ones, two subs and one Arc in my Sonos system.  Just like everyone else, I’ve experienced constant speaker drop out.  At the behest of Sonos I purchased a Boost.  Problem not solved.  After reading numerous comments, i thought adding a second wired Boost to my network would finally fix my problem. Totally made the problem worse.  In spite of what Sonos says, Boosts DO NOT WORK.  Total waste of money.  After moving it all over my house to “find the best spot” i have removed both Boosts from my Sonos set-up.  Now with my only my router managing my Sonos speakers, I get significantly REDUCED speaker drop out.  I have two used Boosts available for anyone that wants to waste their time

Dear all,I am using Deezer Family with my Sonos system:4 pairs of Sonos One, one of the pairs with a Sub 2 Play 5 Sonos Controller S1 All fixed IPsWhen I group more than 3 pairs of Sonos One (incl. Sub), the 4th pair starts the music with a delay, and then starts/stops randomly. With only 3 pairs (incl. Sub), there is no problem. It doesn’t matter which pairs I group, but as soon as I have more than 7 loudspeakers grouped, it doesn’t work any more.Funnily enough, everything (up to all 11 loudspeakers) works perfectly with my NAS. Stable, fast, no issue at all.It’s neither a internet connection issue (600Mb fibre), nor an access point issue, as it is close to the loudspeakers.Nor is it a Wifi interference issue, as there is only one access point with 2.4GHz, and no interfering signals (checked with a Wifi analyzer). Also tried all different wireless channels.Nor is it my access point. Tried setup with Sonos Boost. Much worse than now where I can play at least 6 Sonos One and my Sub simu

I have an older Connect Amp.  It’s working fine.  It used to be when I turned the volume all the way down, it would display a solid green light.  Now, when I turn the volume all the way down I get a solid red light.  Not orange.  Red.  Otherwise working fine. What does this mean?  Thank you.

Been using the Port for more then 1 year and was faced with multiple drops outs (see other topics for this)After having purchased a BOOST, all the drop outs were gone and I even switched the audio delay back from max to low. Have enjoyed this setup, with no delay and no drop outs, for more then 6 months.Unfortunately I had a power outage last week and since then the drop outs are back :-(Have taken all my sonos devices off power and back on again to intiate some kind of reset,,,but all in vain. The drop outs remain :-(Is there a way I can check if my BOOST is still working properly? (I can see that all my devices are on WM:0, so I guess it is...as there are NO Wifi credentials listed in SONOS)Does anyone have an idea on whats going on…..and how to fix? (Nothing has changed on my setup….I only encountered a power outage) Btw: Sometimes the sound drops completely (and the only way to get it back) is to select another source (eg spotify) and then go back to line in (which is the turntable

Hi, I own a Apple TV 4K, a Sonos Beam Gen 2 and a brand new Samung Q70 tv. When I pause something in Netflix and then unpause it the sound is gone. The same happens when I change episode. Anyone has some idea’s what is wrong? Chris

Watching a movie the from my nvidia shield the sound goes up and down almost like you turned on the loud modediag 1060090213

Hello,ive recently moved property, bringing all of our Sonos stuff with us. In the old place, I had a dedicated SonosNet up and running as my Playbase was right next to the router, so it was easy to run an Ethernet cable directly, so then all devices showed up as WM:0 as expected.In the new place, my router isn’t in the same room so I bought a Boost and hardwired it to the router.  Frustratingly, some devices were still showing as WM:1. I restarted them all, which fixed some… but I cannot get the Playbase to show as WM:0. Am I just being pedantic and Sonos is intuitively selecting the strongest signal or is there something I am missing? It would be nice to get all devices on the SonosNet, reducing WiFi traffic on the router. thanks  

First time here hoping for some help.Purchased two Symfonisk Bookshelf speakers as a start for my full setup but I cannot for the life of me get them connect to my network, I keep getting the Error code 1002 more info states this is an update failure on the speaker itself and iv power cycled them multiple times with no change.I keep getting asked to re-log back into the app aswel, anyone able to sling me some advice?Thankyou in advance.

I am not sure which is more annoying, Sonos or Netgear. Neither offer a user friendly experience but I am learning a lot about both trying to get them to get along together.My Sonos system (S1) regularly drops rooms and skips through songs on Deezer. A new device connecting to the router is enough to start Sonos acting up e.g. someone arrives at the house and their phone connects to WIFI. I read disconnecting the bridge helps - done, and some improvement. I read reserving IP addresses helps, so I began the process through the router web GUI. After adding a few of the SONOS components, it became obvious that the device name could not include spaces or punctuation.I then found I could not enter any device without a “invalid name” response. In desperation, I deleted all the previous reservations. but I still received the invalid name, even for devices that had been added without issue before.I then remembered I had changed the router name to “Loft Router”. I tried removing the space and h

I have recently changed my router and on trying to get my Sonos system back on line I cannot get all my system on either my iPad or my iPhone. I can get each unit to work but my Play One and one of my One SL’s appear on my iPhone and my other One SL and my One appear on my iPad. They all appear on my computer if I login on Sonos but I cannot get all 4 units to appear on the same app !I’ve tried resetting the router, factory resets on each unit, deleting and reinstalling the apps and for about 5 minutes yesterday I got everything working on both iPhone and iPad but a few minutes later I got the message saying that it couldn’t find my system and then it found only two items.I’ve done everything I can think of so any help welcome ! 

Recently changed mesh router system and plugged and unplugged all the sonos devices and the NAS where the library resides.  Did same with router too a few times.  Use a boost and 7 devices connect to it.  Everything works fine except when I reindex whether using app via ios or pc it starts then never stops.  Chatted with Sonos support and in both cases fiagnostics show reindexing wasn’t happening even though the app indicated it was running.  No error message just keeps going on for over an hour if I let it.  Was told to call in during office hours but wanted to see if anyone had suggestions.

I have all my speakers set out and working on my desktop app but the iPhone app has dropped two of them. No point in rebooting speakers as they are working? Any ideas?