Talk Sonos Products

Tengo un equipo sonos 5.1 compuesto por beam, sub y 2 sonos one. Mi pregunta es la siguiente: ¿Es posible ampliar el equipo con 2 altavoces delanteros symfonisk al lado de la barra para que suene más fuerte delante?? ¿Sonos lo permite?? ¿¿Funcionaría bien? Muchas graciasUN saludo

 Do you know why this pop up amazon add comes and makes it impossible to control the app?  

Hi there :) Last year I upgraded from Beam to Arc, and I absolutely love it <3 However, this year I was thinking on either upgrading the system with the Subwoofer or buying a turntable and use it with the Arc...(which I’ve already seen it would be difficult/expensive and the best option would be going with Sonos Five) But, what if I can do both? Would it be possible, or a good choice, to buy 1 Five and….Use it as rear to the TV system - Would I be able to use Atmos still? Connect it to a turntable, I understand I could create a group with Arc to listen to music right?I know 2 Five would be the best, but maybe I can start with 1 and later add the second haha Thanks!!!!

Hello, I am reviewing/seeking a soundbar that has some synchronization control over the incoming signal. I would like to be able to connect, via RCA jacks, a line level audio-only source such as a guitar emulation device or an optical to RCA audio converter coming from a standard HDMI equipped television. I’ve noticed when I played around an earlier version of the Sonos One amp that there is a delay from the time I dplay a chord on electric guitar going through a digital amplifier line level out via RCA then through the Sonos and ultimately out the speakers, that there is a considerable delay. The other scenario is connecting 10 year old HDMI digital television and feeding the audio output (via optical) through an optical converter to RCA and into the Sonos that the same delay is noticed. Is there anything on the market today that has some audio delay adjustment perhaps in an app, to remediate this delay of the incoming component signal? Thank you

It seems that the iPhone only presents the Sonos controls (play/pause, volume, skip) in the Lock Screen when Sonos was the last app used. It would be very nice to have this available anytime the Sonos system is playing.

I am probably being stupid but two questions. Why when I add a song to the play next queue does it seem to add the entire play list? Second why if you clear the queue does it stop play the song that is playing at the time? this seems stupid to me, I have lost count of the times when we have been having a house party and the song that has been queued doesn’t play, I look at the queue and theirs loads stuff from playlists that I may have choose a sonf from.  When I clear it is stops the song I’m was playing and everyone boos lol.  any advice?

Hello, I’m currently in a boarding school and had to hard reset my Sonos roam, as it was not working properly. Now I have the problem, that I can't set up my roam, as I don't know the password to the wifi because I only got access to it by installing a profile on my iPhone. Do you know any ways to solve my problem?Thanks for help

Before I added the sub the bass on beam with SL rears was pretty good, since adding the sub aware that the low frequencies go to the sub but when you switch off the sub in the app would expect this to return as prior without but all it does is switch off the sub.  Is this normal or there an issue?

Subject says it all - Beam (Gen 2) what comes in the box?I would like to shop for optical cables (etc) before it arrives.thanks!~P

My husband has an iPhone and an iPad, I too have an iPhone and an iPad. We both have downloaded the Sonos app, and we have both logged into the app using a single Sonos account. We share one Spotify account.  All four of our devices are linked to our home Wi-Fi, and the Sonos Move is also linked to the same home Wi-Fi. I can connect to the Sonos without any problem, on MY devices, but my husband’s devices cannot connect to the Sonos Move, although we have gone through the troubleshooting/connection prompts several times, with no luck.  His Sonos app does show the Sonos Move, but it says he is not connected to it.  Shouldn't we be able to freely use all four of those devices?  We are only trying to use one of them at a time, by the way. Thanks for any insights.

Hi new to the communityi have a Russ sound amplifier system with 6 zones in house. I use older white Sonos Connect device to pipe music to each zone. Can I use the new Sonos Connect Amp to the Russ Sound system to get that additional wattage and better quality or just go with new Sonos Connect.  Thanks 

So I have a sonos beam connected to my Samsung smart tv via hdmi arc and I have a chromecast connected to the TV via hdmi. I stream movies using apps such as Netflix and others. Using this setup I only get pcm stereo sound and no 5.1 dolby digital with chromecast. When I use native app netflix installed on the TV 5.1 dolby digital works. We all know this by now. But my question is, if I buy a TV with built in chromecast, will 5.1 dolby digital work with my sonos beamthen?

In our old flat two products were listed in Settings / System: “Ceiling speakers” and “Soundbar”.  We used to select one or both speakers.In our new flat we only have the “Soundbar” but “Ceiling speakers” is still incorrectly listed in Settings / System.  How can I delete “Ceiling speakers” from the products list?I have tried everything, both through S1 and S2 controllers.  Nothing has worked.

Hi all,I was so excited to receive my Sonos Roam this week. First Sonos product for me, but I love the brand and my interactions with other Sonos products in the past (friends, showrooms) have always been great.  Unfortunately, I sent my Roam back to Sonos for a refund. The problem? That power button at the back.  Everything else is excellent, sound, design, size, I love it. But the power button is a really poor implementation. There is no click whatsoever unless you press the button really strongly. I never knew if I was successful switching it on or off. If you press the button a bit on one side it just doesn’t work. It got on my nerves and I ended up sending it back.  I was thinking maybe I got a bad unit, but I have seen a few comments in Reddit which are consistent with my experience.  how is it working for you? I might go to a brick & mortar store to try one out. If I can confirm all units are the same I will have to wait until this is fixed or get an alternative brand which,

Not sure how accurate this is, but according to this video from Audio Advice, DTS support is coming on November 21.Start at the 4:05 mark:

Sonos likes to hear what people want, so I’m asking the question (Yet again?). When will Sonos finally support DTS decoding for the soundbars? Seems to me that there appears to be a pretty reasonable user base (& lost sales) that is continually asking for this. Given the Arc has now been released, it would be an opportune time to support these codecs, even if they user has to pay a little more for the licensing cost involved (Via the Sonos App). Pretty sure its not easy to transcode DTS:X tracks to Dolby? (DTS is a different story)

I have a Bridge hard wired into my router, and a Connect Amp connected to an existing AV Receiver. Over the last 2 months, the Connect Amp has dropped off my system completely and had to be added as a new product whenever I want to listen to any music.I’ve resorted to completely resetting the system, and it worked for 24 hours!! I’ve turned everything network based off, rebooted my router, turned added the Bridge, waited 10 minutes, added the Connect Amp, waited 10 minutes then added other WIFI items individually - and it worked for another 24 hours.Before I put everything in the bin is there anything else that can be done to get the system working - it was working fine until the last update was released and support no longer provided.

Hi guys,my current setup is a 2016 Sony TV (xd49xd7005TV) +new AppleTV 4k (6gen): my TV has an ARC output, but no eARC. It supports up to Dolby Digital plus (no ATMOS).I’m thinking to add to this setup a Sonos Beam (2nd gen). I was just wondering how to connect the whole system. Should I connect Apple TV with my TV through HDMI and then my TV with the BEAM through ARC (using a regular HDMI cable)? Or should I do it some other way?And what sound will get out of it? Will it be Atmos? Dolby digital? Or even less? Thank you! Bart 

Good Day,Have an intermittent issue with momentary audio blips from NVidia Shield 2019 Pro - Plex, Netflix, Prime etc. Setup is LG OLED B8, Monoprice HDMI cables, Arc. Previously had exactly the same issue with a Playbar. This happens once in maybe 10 mins, and is a blip - milliseconds. All is via TV apps, but they are poor in comparison to the Shield. As far as I can tell everything is up to date. Any assistance appreciated.

I have an Amp hooked up to our living room TV in our house. (I also have a home theater setup using Sonos in our barn/guest house with the big screen TV.) I’m really fed up with the Amp, after any blackout or power flicker, losing all settings. I’ve been using regular stereo audio input pulled from an HDMI switcher to feed the Amp. Whenever we get a power flicker, my Sonos devices lose their groupings and settings. (Which, really, is pretty sad considering that pretty much any device, in 2021, can save such settings in non-volatile RAM - except the high priced Sonos!)Every time we start up the TV and there’s been a power flicker (which we often don’t know has happened), we get silence. So, instead of using my IR all-in-one remote, I have to pull out my phone and run the Sonos controller and change the Amp input BACK to “Line In,” where I always leave it. What’s amazing (and sad) is that this system is on a UPS. Everything on that UPS keeps behaving normally during an outage or power fl

Hi, just connected new LG OLED TV to new Sonos Arc . All connections and set up verified by Tv and Sonos app. I can’t get anything to play with Dolby Atmos through the Arc even if I try Apple TV4K with movies featuring Atmos. Any assistance would be appropriated. TY 

Before the latest app update, i was getting dolby atmos with hbo max on firestick tv 4k but not anymore. Does anyone here having the same problem?

Hi - I am working on a market/coffee shop setup in a 3000 sq/ft rectangular room.  Looking to have background music in the space.  What kind of setup would you suggest?  

Hello Sonos Team Happy Wednesday, I was checking details on your Sonos Play 5 generation 2 & 3 and just wondering is possible to adjust-update the app so all generations can pair, which will increase customer experience since final users will be able to pair their devices to enjoy the high quality of this amazing products.Regards

I am new to Sonos.  My Sonos Connect is attached to my desktop, thus leveraging the desktop app to play.  I want to know if there is a way to play the system from my Sonos iPhone app when the desktop is shut down?  I don’t want turn it on just to run the Sonos system.