Show off your setup or get inspired by others
Recently active
I'm a Sonos newbie looking for a little advice.I'm finishing my basement, basically a big open room.I am planning on doing surround sound in the seating area w/ an Arc and two of the sonance in ceiling speakers for the rear. Ceiling is a drop ceiling. Am I correct in assuming that the speakers are too heavy for the ceiling tiles and need a bracket. Is there a recommended bracket for the speakers?
Hello everyone,I am new to Sonos and considering Sonos for my home theatre. I really like the look of the in-wall and/or in-ceiling speakers, but they seem to recommend their home theatre package with the arc, subwoofer and what appears to be two portable speakers. I am confused on what to do because I want the best possible sound quality but also would prefer to use the Arc/subwoofer with either the in-wall or in-ceiling speakers. Suggestions please! Thanks
Hej eksperter,Forhåbentlig kan I hjælpe med at løse en udfordring, jeg har.Jeg har en Sonos Connect S15, som jeg faktisk har været glad for i flere år og som jeg (naturligvis) bruger til musik-streamingtjenester, især den klassiske streamingtjeneste IDAGIO og senest konkurrenten Primephonic. Connect S15 er tilsluttet en analog forstærker med ligeledes analoge højttalere, og jeg styrer hele herligheden med en iPhone 11 og iPad Pro.Desværre oplever jeg gentagne gange tilslutningsproblemer ved brug af IDAGIOs egen app, og hver gang foreslår deres support, at jeg tilslutter via AirPlay, men problemet er, at min Sonos Connect S15 ikke har AirPlay. Da jeg for kort tid siden ville teste Primephonic og deres app, konstaterede jeg, at denne KUN kan tilslutte via AirPlay. IDAGIOs app kan (for det meste) selv finde min Connect UDEN AirPlay, men det svinger som sagt meget.Mit spørgsmål er derfor, om der er en genvej til at løse disse tilslutningsproblemer - primært om det er muligt at forbinde Son
Hi there, I’ve set up a Sonos Arc and two Ones in my living room with the Ones acting as surround speakers. One of the things I really like about it is when I can have the Ones set to play only ambient audio for music. The instrumentation sounds so distinct that way! The next room over is my master bedroom, where I have a wall-mounted Five. I keep fantasizing about adding two Ones and having them provide ambient audio, as well. Is there any way to achieve what I want, short of replacing the Five with a Beam or an Arc? Have even toyed with the idea of adding them as a second pair of surrounds to the Living Room theater setup, but of course that would require me to play music in the living room I’m not occupying in order to get the ambient audio flowing in the master bedroom. Thanks for any advice you can offer!
After looking through Sonos’ forums and other internet corners (AV forums, Reddit), I still haven’t quite confirmed whether or not it would be possible to achieve a 5.1 setup with Sonos using the Arc + 2x Ones + Sub for PC gaming on a LG CX.Some posts hint at this being a possibility, but I’d prefer to confirm that it works before I invest more into Sonos’ ecosystem.Does anyone have this setup and can confirm that for PC gaming specifically, you’re able to get sound out through all of the devices satisfactorily?Bonus question: has anyone replaced their Sonos Sub in this configuration with the Amp + third party (SVS) dedicated sub?Appreciate any confirmation/guidance that you might provide!
Curious if anyone has tried any of the following to charge their Sonos Move. There is no mention of these products working with the Sonos Move in the description or Q&A and I know the Sonos Move is fussy so I was hoping to get someone to confirm which, if any, to purchase: Charger 1Charger 2Charger 3Charger 4 Thanks in advance.
I searched the forum but cannot find an answer. Does the One (SL) have better WiFi/Sonosnet radio or antennas than the older Play1? Will it connect better/stronger to Sonosnet than a Play1 will do?
I set up my second Roam to the first one and used the PAIR feature in settings. All goes well. Music plays in stereo, etc. But when I come back later to play music the two Roams have ‘separated’ on their own and assigned themselves new names.One is named the original Roam’s name (which was the name of the room it was in) and the new Roam just takes on a generic name like ala ‘Sonos Roam’.I relink them, they play. And then in awhile they disconnect on their own.Customer support says I’ve got to go into some crazy-a55 process with my Comcast router, and settings and what not -- but I have a feeling there is a simpler solution. Yes? \Any suggestions appreciated, thanks.
Just opened my $169 Roam - and was shocked to learn it didn’t come with any kind of carrying case and/or a strap. Seems that for this kind of money and a product that is meant to “roam” a case should be included.
Is there a clear explanation of the Roam’s power modes anywhere? I have been experimenting with it and am confused by a few things when it is not being charged.Firstly there seem to be two ways of it sleeping: sometimes it sleeps about a minute after being full-on and idle, and other times it stays awake for a long time.Secondly the white light is sometimes on when it is awake, but sometimes the light is not on when it is awake. I can’t tell what the difference between these two modes is, or how it chooses.The red led does seem to be consistently on when charging, so that one I understand.There is also some weirdness with UPnP events during the sleep/re-awake cycle but that probably just needs more poking around on my part.
Hello--I have a home with a 10 year old wired ceiling speaker system with about 7 different zones. All those zones are connected in the basement to one integrator--all the speaker wires go into that device. A main screen exists on a 1st floor wall where you can select which source you want to play in any room. For example, I can select “kitchen” then “ipod” (OMG) or “back deck” and “FM radio”. There is an AUX based docking station mounted in the wall there for a 1st Gen Ipod. (I imagine this was very hot in 2010) Because this system isn’t current, we end up either using FM Radio on it; or just using one of our four Alexa devices to play the music from a source we like (Pandora, Amazon Music, etc).Note: also wired into that integration system is a DVD player, a BlueRay player, and what looks like a Serius/XM receiver--all sources for different zones that have either TVs or just ceiling speakers.How do I use this existing system of wired speaker zones, to upgrade to something that
I just fitted the Sonos sub on its side, under my bed. I cant begin to explain to you how much more bass you actually feel and deeper tones. I guess the bed frame acts like an enclosure.This has absolutely transformed my experience. If you like the Sub now, you need to do this immediately.
Hi All,I have a new Sonos Arc Entertainment set, but couldn’t get Dolby Atmos to pass thru to it. For example, from Apple TV, proven Dolby Atmos material to Sony XBR-65X850C to HDMI4 (ARC) to Sonos Arc. Apple TV does not hand shake with Dolby Atmos on Sony. Digital Dolby 5.1 is OK.questions:Does the Sonos ARC do PCM multi-channels or only compressed Dolby? Does the Sony XBR65x850C pass through Dolby Atmos to Sonos ARC via the HDMI4-ARC?please help if you have experiences in the above.many thanksey
I have two SiriusXM accounts, one for each car. This allows me to use two streams as long as each stream is started from different accounts. This will work OK from the Select Music Source and Alexa is set to use one specific account. The problem is when using Favorites because there’s no way to distinguish accounts. It would be nice if there was a way to easily see what account is tied to a favorite before using it.
A bit of preamble… I own a trio of Sonos One speakers and am considering buying a Sonos Roam. After a recent move, I found myself with spotty Internet access. I have a travel router that I use to make my own private WiFi network for my apartment, but it is not connected to the Internet (unless I turn my phone into a mobile hotspot). Currently, if I want to use my Sonos system in this (admittedly janky) set-up, I need to use my phone as a hotspot - and even then there’s some lag time.Enter the Sonos Roam. Obviously, I can play music from my phone over the Roam via a bluetooth location. What I want to know is, can I use the Roam’s Sound Swap feature to play music from my phone onto my entire Sonos system (assuming that my WiFi network is not connected to the Internet)? Feel free to ask clarifying questions if I botched the description of my jury-rigged WiFi...
Hi. I’m new here :) I was an audio addict years ago and had a big setup. This was when CDs and big DACs ruled the landscape. fast forward 15 years, 3 different houses and now two children and my listening has changed dramatically. The CDs are gone, the big 2way setup is gone, and it’s all spotify and casting to different speakers. Yep I went for convenience over clarity! Early this year I bought a play5 gen 2 for my living room. It sounded good but wasn’t that exiting. Just nice and clear. I came across another at a good price a few months ago so I grabbed it and set up a stereo pair. This sounded a LOT better. Since then I have changed to tidal, but learned that Sonos doesn’t like their hi res audio. (I’m steaming off my iPhone 12) So a week ago I set up a Qobuz account and started streaming their Hires gear. This sounded so much better, it reminded me a lot of my “old glory days” just with a fifth of the physical footprint! Rhys has me wondering what people use to feed their 5s. I
So for the last few years, I’ve been living in the dark ages somewhat with nothing more than an HD TV in the living room.The recent purchase of a PS5 has been the catalyst for me to start sliding down a slippery slope to building out a decent surround sound setup in our front room. The first port of call is going to be a new 4K TV (likely to be an LG OLED48CX5LC).However, having asked a question on Amazon around how high the TV stands (so I could figure out whether the Sonos Beam I have would cover the picture), I was basically told that it wouldn’t fit- but not to worry about it, because the direct sound from the TV is better than the Beam anyway so I don’t need a sound bar.So I guess I have a few questions that come off the back of that:Is that a fair point? Should I not worry about the Beam? If I’m not going to use the Beam, can I still connect my SLs for surround sound? If so, how do I do that? Again if the sound from the TV is so good, should I not be thinking about upgrading the
I'm hoping someone can shed some light on this for me. I recently purchased the HD fury arcana but when I connect it to the firestick and projector I only get sound for 5 seconds while the sonos app is trying to connect and then it stops and I no longer receive sound. I was getting sound prior to connecting the hdfury when I used an hdmi switch. Can anyone confirm what settings I should have on the hdfury to ensure I receive sound. I'm using 4k cables, about 40 ft long to the projector and to the arc. I've enabled cec settings on the firestick and projector.
I currently have a single One and contemplating purchase of a Beam plus 2 x symfonisk speakers for TV surround. My question is whether it is possible to use the Beam / symfonisk combo for TV and also separately use the One and one of the symfonisks as a stereo pair for music?what would people recommend so that I can get ‘the best of both worlds’ with this combo? Maybe Beam plus One for music would be a better bet?thanks
Can sonos amp connect 4 “normal” speakers (2 Mini pods and 2 micro pods) and a subwoofer?
I have two Sonos Play 5 paired for stereo plus the Sonos Sub. Is there anyway for me to connect these to play as a stereo pair plus sub to my TV.
I used Sonos speakers a while ago, 5 years +. My friend had the system and I was really impressed. I recently decided I needed some speakers at home and remembered Sonos being the best quality. So I purchased the double pack of the ONE SL. I have to say i’m shocked about how much the usability has declined. Have had constant issues with connectivity, no one is available over the phone, can only connect one of the speakers, does not work on wifi, one of the speakers will not connect at all even over ethernet connection. Complete embarrassment of a system.Will be returning for money back, ill go and give Bose a call. Don’t waste your time with Sonos. I have exceptional wifi too.
We recently purchased our 2nd Move. We love them.What are the chances that the charging bases will come with USB-C style chord?the move is positioned on our kitchen desk and the power outlet is inside a cabinet the accesshole is too small for the plug to pass through?
I wonder if anyone can help with a little matrix problem I have. My Living Room device sends out to the Dining Room and Kitchen… both are the same distance away… the kitchen and dining room are also very close to each otherMy question is why is the living room sending out to the Dining Room and Kitchen, but neither the kitchen or dining room mesh with each other? They send back to the living room…. but not with each other and they are physically very close. Should it not create a complete mesh will all sending and receiving to each other? The dining room to the kitchen says it has an inbound and outbound value, but says blocked… Thanks for any insight.
Hey, does Sonos pro-ject t1 work wirelessly without any other equipment with Sonos one speakers dual set?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.