Show off your setup or get inspired by others
Recently active
Hi, I have a fairly large living room combined with dining room and kitchen, altogether about 50 square meters (530 square feet). Currently I have a Beam connected to TV. I was planning on adding surrounds and a sub, and I also wish to add a turntable at some point.First of all, is the Sub worth it in this setup? I am watching quite a lot of movies and tv shows and not listening to loud music as I have a small child.Second, as far as I understand, you cannot add the turntable to the Fives, if they are already used as surrounds, or has this changed? So I thought about two OneSLs and a Sub. And later turntable with a Five or maybe a Raspberry hack, or some other solution? In the situation of adding Five with turntable, is it possible to listen to music with one Five and a combo of Beam/SUB/OneSLs in the same room? Third, would it be a problem, if the surrounds are about 3 meters (10 feet) behind the couch, because the couch is not near wall and I don’t want to have stand with a speaker i
Hello everybody !I come from France, so I'm sorry if I do some mistakes with my english^^I have a playbar (+ 2 play 1 + sub) connected on my LG TV (OLED GX) and I use the spotify app on this TV to listen music (I also use my phone with WiFi, but it is very pleasant to have a big screen)But when the sound come from a TV, the Playbar set the sound in 5.1 as for a movie, and it is very worse than WiFi for music.Does anyone have a solution to have music setting on my playbar when I use Spotify on my TV ?The only solution I've found is using spotify on my PC connected on my TV.… Thank you everybody :)Rémi
Hello -I was thinking of buying a Sonos Arc (1x) and combining it with two Sonos One speakers (2x) (for rear surround - already own this pair) and also buying a Sonos Five (1x) as a center speaker (+ using it for dual use with my turntable). Do you think this setup would make sense? I understand that with the Arc and Five both being in the center (Arc right below my TV mounted on the wall + Five on the media console table below it) it might be redundant? Thanks a lot for reading and your help!
My home theatre room drops out intermittently (Playbar + Sub + 3s as surrounds), while playing music or radio, not while watching TV. This has happened for the last couple of weeks. All other rooms are solid. This problem started after replacing to a new Sony TV, which is also at the same time has we got new neighbours in the house next to house. So not easy to figure out, I guess. I’ve unplugged speakers, changed WiFi channel and also the SonosNet channel, and the problem persist. Looking for other solutions. Diagnostic 124111491Thx
Hey Guys,After some help here. My wife is keen on me replacing my 2 Sonos One rear speakers with in ceiling speakers to make our Sonos Arc surround system more discrete.I wanted to find out whether it was possible using a Sonos Amp to have the 2 Sonance in ceiling speakers as Sonos Arc surrounds (Will the Sonos Amp with its speakers just add to the existing Sonos Arc + Sub system)?Also, can anyone assist with what the sound quality is like compared to Sonos Ones? If you have a Sonos Arc + Sub system, is it a reasonable expectation that the in ceiling speakers will sound as good when playing music and watching surround movies? Thanks in advance
If I have 2 Play 5 speakers, how do I know which is left and which is right?
With the introduction of Dolby Atmos to Apple Music, will the Sonos app begin supporting Dolby Atmos and Lossless audio?
I’m planning on getting a pair of fives and pair them in horizontally (because that’s what works in my space). My understanding is that they will both carry the left and right channel is this orientation. Is there a way to get them to be left and right discreet speakers while paired in horizontal orientation?
Hi,Got a few questions regarding a Sonos Roam that concerns me…Multiple networks? Set up a new network when visiting family, back home it didnt recognize our network anymore, a lot of time to solve that issue, as the app was showing the wrong instructions for getting it back.. (how to click the buttons when reconnecting) Bluetooth. I cant play through the SONOS app to the Roam when outside and lost the wifi? isnt that the thing? Cant start playing music when i’ve put it at charging.. had to remove the charger and start the music, then back on power source.. Always dead of some reason?BRErik
Hi there, I used to be able to control Sonos on 5ghz, but now it seems impossible.I tried to toubleshoot myself and read other questions here, but none solved the issue.Can you help me please?This is my diagnostic #781152974.Thanx in advance.
Hi,i‘ve got a new Sonos ARC, Sonos SL and Sonos Sub (Gen. 3) setup.With this, i‘ve got problems with some Apple Music Dolby Atmos Tracks on the connected Apple TV.The Bass seems to be to high. It sounds like a bass with an overdriven volume, but the problem is on low volume too.In tracks like „The Weeknd - Binding Lights“ the problem is very strong.TruePlay is activated and I have tried a few settings like loudness with the same result.In the sleepingroom, i‘ve got a Sonos Beam.I am more impressed from this sound!The Sonos Beam has a better Sourround experience (without sourround speakers, but a smaller room) and the bass is more clear.All firmwares are up to date.Reading all the good things about the Arc. Is mine defect?Greetings from HamburgSebastian
Hello! Trying to connect to Spotify on my Sonos app, but the service simply doesn’t show up on the list of music services. There’s no errors, etc; out of the services offered to connect to, Spotify isn’t one of them.I’m currently in South Korea, where Spotify launched its services fairly recently (as of this year or so?); perhaps that may have something to do with it?If this question has been answered already, apologies; the problems I have been having are little different than the previous postings that I’ve found and did not seem to address the issue.
Dear Amp users, the volume balance left/right goes up to +20 L/R. Does anyone know if this represents the dB level? Meaning, if I give the right speaker +2, does that increase the right speaker by 2dB? Thanks
Buying a home that has 8 pairs of wired speakers (total 16) throughout (including a multigenerational suite). The family room is two stories and does not have any speakers, so I was planning to buy an Arc for the TV. If we plan on using the 8 pairs of speakers for music only, how many amps would we need? I don’t mind having two rooms playing the same music at same volume if that helps. We would ideally like to connect the Arc to also play music when not watching TV. I’m hoping I misunderstood some of the other threads, because it sounds like I’d have to buy 8 amps? That’ll be pricey 😔
Hi,I’m new to Sonos. We have an Arc soundbar connected to our TV (sounds great) and wanted to start playing our CDs and albums again. Thinking of getter the Sonos Amp amplifier. How do you connect both, turntable and CD player) to the Sonos Amp amplifier? Thanks!
Does anyone know what the last 2 recent firmware updates to the Roam included? There is nothing on the Sonos website under release notes regarding these updates.Thanks in advance!
I’ve currently got a playbar, and planning to add additional speakers as I now have a bigger place. Was going to get 2 x Roams but have some questions hoping to get help with 🤞 Can they be configured to create surround sound set up with playbar? if so, can they also be used independently in another room if you take them mobile? thanks for any help
Hi, i have the Marley Stir it up vinyl player. This vinyl player includes a pre amp function and a bluetooth connection. With this features I thought I could connect it to my speaker sonos 1 easily but it does not connect and I learnt reading some discussion on this community that the sonos one speaker does not have a bluetooth connection.can you please confirm me which model I should use to make sure I can use my Marley device ?Roam or Move correct?Will they be ok to connect to the Marley device described above? Thank you!
Hi,Testing Amazon HD vs Spotify.On the Amazon app when using Airplay, tapping the Ultra HD logo of a song confirms that it is playing 24-bit / 44.1 khz. Still on the Amazon music app, when selecting my room (same Sonos speakers), the app shows that it cannot confirm the bit-rate. My question is: is it only the info that is not available thru Sonos or is there an audio quality advantage to use Airplay?Thanks Nicolas
I have a Sonos Play:1 that I am trying to connect to.It was previously connected via a Sonos Bridge but I understand that isn’t needed anymore. I have moved to another house with a new wifi network. I installed the Sonos S2 app on my phone (iOS) and my Windows laptop.But on neither apps can I find the Play:1 via Wifi or connected to the router.I also don’t have access to the System option in the iOS app and the Windows app just redirects me to the website which tells me to install the iOS app.So I’m kind of stuck. Is there somebody that can help me with this?
HiI recently buy a pair or Fives for music and home theater. For an immersive expérience, i buy a pair of Symfonisk to put them in surround but how ?! Do i need a beam or playbar or arc ?! But in this case, my fives are useless ! 🥵thanks for your help
I am trying to login to the app from my iPhone but its unable to recognise the login details (they are 100% correct) I can login to Sonos fine if I use a web browser any ideas thanks
I have an existing Sonos network with 6 players of various types. I’m thinking of buying a Beam. But I need to understand how it will interact with my Sonos players. I can’t find much info on the subject. The closest I get is some rather terse statements in the Sonos User Guide under “home theatre settings”. The “TV Autoplay” and “Ungroup on Autoplay” settings could do with a bit more explanation…Can somebody please comment on following assumptions / questions:I can add Beam to one of my existing groups. As long as the TV is off, Beam behaves like just another player in the group. When I turn on the TV, there are several possibilities: TV Autoplay = on, Ungroup on Autoplay = on (default) Beam switches to TV audio Beam drops from the group The other players in the group continue playing whatever they were playing TV Autoplay = on, Ungroup on Autoplay = off Beam and all other members of the group switch to TV audio TV Autoplay = off Beam and all other members of the group co
Since I’ve tried customer service with both Sonos and Sophos, I thought I’d put this out there for any suggestions/wisdom.Macbook Pro, running 10.13OS, Sonos 1 Desktop App and Sophos Home Premium 10.0.4 (and have had the same setup for some time with no issues).While the Sonos desktop app will show connection to the system when checking “connect to existing Sonos system”, it never gets past the main screen error message “Sorry, we can’t connect to Sonos”. Mobile apps work fine (all on the same wi-fi network).Turning off Sophos does not change anything, but uninstalling it brings Sonos back (and reinstalling permits it for a day, then the issue returns).Obviously, these two aren’t playing nicely together - again, I’ve been trying to get help on both ends. Any thoughts appreciated.
I am buying an ark to provide soundfor my television. Well I also be able to use it to play music withmy other Sonos one speakers?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.