Show off your setup or get inspired by others
Recently active
Looking for some clarity. I have a recent Connect. (gen2, s15) I want to use it we a tablet that only runs the S1 software. I read that one can do a downgrade, but it seems as if that’s only true if you have other S1 equipment already in the system. Basically, it seems like the instructions from Sonos for the downgrade are incomplete. Sonos says do a reset, and then set up the system with S1. As far as I can tell, that does not work. From reading different sources, it seems like Sonos should say do a reset, turn on an S1 system/device, (and no S2 devices), and then add the item one is trying to downgrade to that system. Yes?
Volume down was working then just stopped. Volume up and mute works just fine. Using a TiVo remote. Tried pairing the remote again. Tried power cycling the arc and setting up the tv again.
So I really thought I had this set up figured out. Surround with Arc, Sub and 2 x Sonos One. HDMI connection to HDMI Arc from Arc to projector. HDMI connection from the Apple Tv to other HDMI port of projector. The LG HU80KSW is essentially a smart tv in a projector package. But I can’t get the wired audio connection to work? I only get audio from Airplay which sounds fine, no lag so far. Why is the Sonos Arc not using the wired Arc connection? I know projectors are theoretically not supported, but the LG HU80KSW is just a tv in another format with a normal HDMI Arc connection. I have a feeling some people on here got this to work but I’m stumped. All the right elements are in place. Any ideas on what I might be doing wrong?
Hi Guys. Firstly, I tried to get this problem answered by Apple, but get nothing but the runaround from their support. While this appears to be a Home App issue, maybe one of the more technical people can help as it is also Sonos-related. I have a mix of HomePod Minis and Sonos Airplay-2 speakers scattered throughout the house. Some rooms only have HomePods, some rooms have only Sonos and some contain both. I want the ability to create a group that I can reference as a single entity and contains only the devices I select - for example, when I play music in a room that contains both Sonos and HomePod Mini, I only want the Sonos to play. Hence the need to be able to chose and pick which speakers are in the 'group'. (The HomePod’s are primarily deployed to provide intercom functionality, speakers in places where a Sonos speaker would be overkill, such as the two garages, and provide voice commands for other Homekit accessories.) I believe the Home app used to have the ability to create gr
Hello Just received the sonos arc. I am replacing a samsung curve ms6500 sound bar from 2016. My problem is the sonos sounds like utter garbage even compared to my ancient samsung. Theres no bass, depth, or i dunno how to explain it. It sounds tinny or metallic, empty. Does anyone know whats going on and how this supposedly unreal sound bar that cost me over 900 sounds like garbage? The only thing im hoping is its my old samsung 55un8500 tv and crappy arc one connect box or something but im not hopeful. Im 2 seconds away from returning this thing but i want it to work. I did go buy another tv , 2021lg oled c series and its coming in Tuesday so Im going to wait and see how it performs on a new tv vs a 7 year old one. Tv isnt because of sonos arc, more of an excuse. I wanted it lol. I dont have iphone and certainly not buying one as they are just as much money and lets be honest that shouldnt be a fix. Theres no true play android i assume? Thoughts or comments?
I've recently replaced my beam with an arc. Sounds awesome. The arc sits on the front of my tv stand which is aprox 46cm wide. The arc feels like it's well supported, but there is a slight gap either side. I was wondering..will this affect the sound even if the arc feels secure on the stand?
Hi all , I'm going to be trueplaying my room in the next few days , I have the beam 2 and 2 One SL surround speakers , when I use trueplay do I have the surround speaker level in the app on full or does trueplay over ride the levels in the app and I just walk around with the iPad ? Also I've been reading about one surround speaker being a different level after t.p , does that still happen or was it a bug in the past ? Thanks all
Hi, I have scoured the internet, and this forum, to find our why I can’t get my Beam to mute using my Apple TV remote. It controls the volume up and down just fine but when I press mute it mutes for half a second and then doesn’t stay muted. I have seen similar threads on this forum but they either have not answered my question or have been closed without a response. This is a second gen Sonos Beam, a third gen Apple TV 4K (the one with the new aluminum remote with mute button), and a Samsung Q80T. Thanks!
I have a Beam bar to watch movies. I have replaced my TV by a projector (beamer) Optoma EH330UST. I’m not able to get the sound in the soundbar. The projector has (2) HDMI 1.4a, 1 with MHL 2.0 . Not sure how to make it act as a HDMI ARC. Or If a HDMI splitter exist to separate the image and the sound. If you have any ideas, please send them :)
each time a new song starts, the sonos app pops up. this is very irritating
Just got a Sonos Turnable and I want to know how can make it play to all my actual sonos speaker ? I don’t have Sonos 5 . Do I need to buy port Sonos ? Amp Sonos ? Or Sonos 5 ? just want to cheapest way to make my turnable sonos play to all my actual Sonos system ?
Hi! I just recently started using the Sonos arc while I was previously using my homepods for surround sound for my AppleTV. Now when I try to add my HomePods to the audio with my Arc it creates the very echo-y sound. Is there any work around to add the HomePods as Surround Sound in the App? I found a way to work around the the echo-y sound but then it limited the soundbar sound(no dolby etc) Any help would be great! Thanks!
Hi, I am using Android 12 and i can no longer clear the playback controls notification on my phone when Sonos is not active. The only option is to force stop the Sonos app. Anyone else found this with the latest Android update. I know Sonos have said 12 is not yet officially supported. Justed wanted to feedback that this issue exists. Would be interested to know when an update for Android 12 is planned since the phones are starting to get it now. Cheers.
Hello,I’ve had a Sonos System since 2015. I have the Playbar, 2 x Play 3’s and a Bridge. I am unable to connect to my TV even through the optical cable so I am about to upgrade (taking advantage of the current upgrade discounts), but am unclear whether I will need to replace the Bridge with a Boost. I have an up-to-date Netgear/Orbi home WiFi network which works very well. I’m guessing I can connect to this instead of needing to use a Boost???? I will be upgrading to an ARC and 2 x ONE SL’s (or maybe 2 x ONE’s). I have an LG TV with Dolby Atmos which is only 3-4 years old. Can anyone tell me if the ARC and ONE / ONE SLs will all play TV and produce a surround sound style experience? (My old system never really worked well with the TV as there was slight lag on the sound which could not be completely cured with the TV adjustments). Can I then move the ONE/ONE SL speakers around to play music in other areas of the house as an when needed? Is the only difference between the ONE a
Bonjour j’ai acheté une platine vinyl jvc que j’ai branché sur ma play five mais le son paraît éloigné.y a t’il une manipulation spéciale à faire ? Quand j’ajoute un peut de poid sur le bras l’es son devient nickel.merci de vos réponses et votre aide
When the battery of the Sonos Roam is dead and we plug it in, it takes a long time before it van connect tot the system. I would expect that such An expensive device would work immediately. Is this normal? If it is, this is a bit of a dissapointment.
Sorted, for some reason the surround levels had gone to a minus figure reset to middle and sound is again great. I had a Tidal trial and was utterly blown away by the Quality of the Atmos tracks in the fidelity and the Atmos effect of the music I now have Amazon unlimited and to be Frank the experience is a little disappointing the atmos tracks seem very "flat" compared to the Tidal offerings.
Hi all. Is it true or has anyone heard that DTS will be coming soon by the end of the year ?https://www.flatpanelshd.com/news.php?subaction=showfull&id=1631624400
Hello all! I have a beam and two Sonos ones set up for our audio in our living room. They are connected to our smart tv and we play music from our phones over the Sonos app no problem. I purchased an audio Technica turnable (with built in preamp) for my husband for Christmas. I want to get it playing over our Sonos speakers. I think I need either the port or the amp to do this but I am confused by the descriptions. It looks to me like the amp is more expensive because it can power external speaker, but I want it to play on my existing Sonos set up. I don't see it clearly written (in my opinion) that if I use the port and the line in connection that the port can connect to my beam and surrounds wirelessly? Is that what it does? I'm hoping to come up with a plug and play solution here. If I get the port, plug it in, connect it to my Sonos app, and stick the line connection to my turntable, will it play my records over my beam through the Sonos wireless ecosystem? Or I need to somehow p
I have a Sonos Amp connected to a turntable. Sonos One in kitchen. Primary purpose of getting the system was for the ability to listen to records in both spaces. The nice thing is, busy cooking and record ends, quick voice command to go to Spotify playlist.However, I can't seem to find a voice command to change it back to the line in for source when I want to go back to play a record. Is the only way to change via the app? HUGE flaw in the system if so and should be a developer priority. Quick search shows topics looking for this for over four years. May even consider returning and building a traditional multiroom system instead.
Hi, all. Just hooked up my Audio Technica LP120 turntable to my Port via Line In. Throws the music to my Sonos One nicely. Sounds great. I have the Port’s analog line out RL going into a Sony A/V receiver which is the same line that the turntable was originally using before I set up the Port. I’m not happy now with how the turntable music sounds through the A/V receiver via the Port compared to when the turntable was connected directly to the receiver. Very bass-heavy and less clear. I realize it’s probably now a balancing act between the loudness-bass-treble settings of the Port combined with those same available settings on the reciever. Anyone have optimal settings suggestions for the analog line out of the Port to an A/V receiver? Thanks.
Hi,I have the following components:Sonos Arc and Sub (Gen 3) Latest LG TV with all the bells and whistles Latest Marantz Integrated amp with all the bells and whistles Two front full range speakers (non-powered) Two rear surround speakers (non-powered)I would like to use the above to listen/watch from various sources connected to the integrated amp while using the Sonos Arc and Sub in a 5.1 arrangement (Sonos Arc as the center channel).What is the best way to set this up? Should I connect eArc from the amp to Arc while driving the other speakers with the amp? Would that do the trick? Do I need to buy other Sonos devices?
So at work we have a pair of ones and a subwoofer and recently we added at home a pair of 5’s and another sub. Both are on different networks. Will my phone recognize and be able to control both systems on the Sonos app?I apologize if this has been asked way too many times already.
Hello Everyone, Current SetupI have a Samsung Q60 TV (HDMI ARC, USB ports, ethernet port, antenna input, optical audio output) Mounted above a fireplace in finished basementI have a coaxial cable with standard RF connectors running from storage room to fireplace through walls/ceilingI have a CAT6 cable running from storage room to fireplace through walls/ceilingI have 4 speaker wires that run from wall/ceiling position to storage room (they do NOT run to TV) - 2 fronts above fireplace, 2 rears above seating area. Storage Room has rack and access to WiFi systemIssueSetup was not well thought out as speaker wires are not running to TV nor is there an HDMI cable running to storage roomGoalWould like to connect TV to 4 speakers via CONNECT Amp and be able to control volume with a single remote (preferable Samsung remote), WITHOUT having a Sonos Beam/Bar/Arc I’ve done a little bit of research and see there are various types of converter cables on the market. Either coaxial to optical audio
Hello !I'm new to the Sonos world and plan to build a system based on Sonos Arc with Ikea symfonisk bookshelf (1) + frame (1) as rear speakers for design/price reason.I can't exactly know if that would be possible to use those 2 different symfonisk speakers as rear.I found some forum thread mentioning it won't (because they're 2 different models) and some others were it should be ok according to the official guide here, bookshelf and frame are part of the same symfonisk product line ("related models can be used together"): https://support.sonos.com/s/article/4807?language=en_US Is there anyone already with a similar setup who can help me figure out what is really possible ? Would be really helpful for my future choices :) Thanks a lot !
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.