Spaces & Setups

Hi, placed an order and received notification that it’s being sent from Holland, does anyone know if this will be subject to import charges following brexit. I thought the order would be fulfilled in UK. 

Bonjour à tous..Je voulais savoir quelle était le meilleurs compromis quand on possède une barre de son arc est un sub gen 3 , je voulais installer 2 enceintes five avec... mais les vendeurs dans certains magasins mon dit  que sa ne ferait pas le boulots comme prévu.... Quelqu'un a un avis concrets ? Si jamais 2 enceintes five ne font pas le taff, quoi prendre ? 

I want to be able to use Sonos Arc for the dolby Atmos, but the PS4 only has one HDMI port and both projector and Sonos Arc require the HDMI port. Sonos Arc optical converter doesn’t allow for Atmos. So my question is what is the best receiver for this set up? I will get the PS5 at some point, but that also only has one HDMI port so I’ll run into the same problem there. Any Receiver recommendations or other ideas I’m not aware of?

It just seems like a no Brainerd that Sonos should be offering an A/V receiver.  Why don't they? Also are there any plans or forecasts of them doing so in the near future?   It just seems to make the most sense especially for those of us who would like to replace existing equipment and the versatility ot would provide would be unparalleled  ( Sonos products with 3rd party speakers, tvs, etc.)  I would totally purchase  it and so would several of my friends.  Seems like a fairly simple concept if they based it around the Sonos amp and just added a bunch of inputs and a couple outputs

Hi all,I haven’t been able to find a way, but just want to make sure I’m not overlooking anything. Is there any way to shuffle between multiple SiriusXM channels similar to being able to shuffle between multiple Pandora stations?Thanks,Ed

Hello, apologies if this is treading old ground but I’m new to this and my head is hurting.I’ve just bought an Amp, and I have two Symfonisk speakers.I would like to plug my record player into the amp, and also plug my TV into the amp (HDMI ARC) to create a surround sound system using the Symfonisks.My questions are:Can I use the TV speakers as the front speakers, and the Symfonisks as the rear?Assuming the answer to the above is no, then I am going to have to buy new speakers for the front or back.  I’m a bit confused as to whether the best answer is to buy a beam for the front, or buy two passive speakers.  Any recommendations for good, simple, low-cost solution gratefully received. 

Hello,Some thumbnails of mp3 music files, located on my Synology NAS, show the wrong album art in my S2 app (app version 12.2.5).How can I correct that? Thanks. 

Why doesn’t someone make the android phone app do the same things as the PC app? They both show Music Library, SONOS Radio, Amazon Music and TuneIn. But the phone app does not show SONOS Playlists. If I go to on this Mobile Device, I see Playlists, but I get a message that says, No selections are available. There are no instructions I can fin as to how to add to the phone playlists. Please, can someone help here? I would like the playlist I have set up on the PC to show on the phone so I can choose the fruits of my labor. Thank you.

I have seen this occur with repeatability under MacOS.  Both Catalina and Big Sur versions.  I set the Sonos device as my default sound output device.  As shown below, ManCave and SonosBeam are Sonos devices.  Within a couple minutes the wired ethernet stops working on my Mac and then eventually a kernel panic.  I am able to control spotify music on the Sonos using the MacOS Sonos S2 App with no problem.  All Sonos devices are wired with ethernet.  I see this behavior when selecting both One and Beam products.  Below is crash report from MacOS.  Thanks Davepanic(cpu 0 caller 0xffffff800fabf643): "Restart timed out in phase 'Notifying power plane drivers'. Total 30000 ms:vfs_unmountall: 570 msPowerOff/Restart still waiting on handler: 3997 ms @ 0x<ptr>, com.apple.iokit.IOUSBHostFamily(1.2)[A4EDF9D5-1A4C-35EA-A92E-88332B37F8D9]@0x<ptr>->0x<ptr>PowerOff/Restart handler completed: 5002 ms @ 0x<ptr>, com.apple.iokit.IOUSBHostFamily(1.2)[A4EDF9D5-1A4C-35EA-A92E-883

I have a new Sonos Amp and have connected my TV using HDMI ARC. All works great. I don’t always want the sound through my Amp, however. When my kids are watching stuff I’d prefer to use the TV sound. I’ve turned OFF TV Autoplay but that doesn’t seem to do anything. Everything always comes out of the Amp. Even if I turn off ARC in my TV settings, somehow it gets turned back on automatically next time I turn on the TV (LG C8). My only option presently is to keep unplugging the HDMI cable from the Amp. Any ideas? Is it possible to switch between my Amp and TV sound?thanks. 

Is the Project Debut Carbon Sonos Edition turntable the same model as the manufacturer's or is it different?It only changes what has the Sonos logo?

Original Sonos customer, with 5x ZP100 units.  Still going strong. When we upgraded our TV system,  immediately bought the ARC and the Subwoofer. Only in set up did I learn that S2 CONTROLLER APP exists. Yes, S2 drives the two new items well. YET, in the same room is one of the ZP100 units and excellent ceiling speaks. We'd love to be able to play both.  Any way to link them??

I have an ARC on B/O with Sonos - come on 2/28! During the wait, I plan on building some L brackets to allow to for the bar to be placed in front and below my tv. Can someone please measure the distance from the back of the Arc to the front of the foot (red arrow).  I’ll researched old posts and know the distance between these ‘feet’ is 41.28 inches. Thank you! 

My arc is set roughly 750mm off the ground and 5 inches from the base of the T.v both are mounted on the wall. Sonos arc wall mount is used.. When seated on the sofas the sound I get is not as good as when standing... Do I need to lower the arc.. Thanks

I have an Arc, 2 OneSL's and 2 Gen3 Subs as a home theater. I completely understand that I can increase the Subs output with the S2 Sub volume slider. What I don't grasp is the purpose of the S2 apps bass eq and its effects on the Subs. Do I use it if I want to boost bass to the Subs? Or do I leave it a zero? I really can't wrap my head around its purpose when the Subs have a separate volume/output slider. At first I assumed that the S2 eq was only for the Arc if Subs were part of the system. Please help and sorry for the rant.

How to I tell Harmony Hub to change Port to the Input (Audio In). I would like to define an activity „Listening to CD“, which starts Amp, Sonos Port and CD Player (connected to Port) and switch Port´s source to the CD Player? 

Greetings,I have the pre airplay system till the update came out.I can run the Sonos wirelessly through my eero system fine.When I try to play through airplay, it not found.I’ve tried adding to Apple Homekit, and you guessed it, not found, but add through the manufactures app. Is that the key? What is the sequence to accomplish that?

Hello,I am looking to complete an install that was started a while back.I have 5 zones (5 pairs) of speakers with volume controls already installed. 3 zones have a pair Proficient C621 ceiling mounted speakers with PVC2 volume controls on each pair.1 zone has Proficent AW650’s and a PVC2 volume control. These are outdoors.1 zone has a Proficient C635 TT dual voice coil with a volume control.All of these pairs home run back to a central location and are hooked up to a Niles SS-6My intent is to have the Niles SS6-6 on and all zones turned on at all times and use the volume controls to control volume and just turn all the way to zero when music in that room is not needed. the SS-6 is strictly used for the impedence protection at this point.I have a Sonos Connect but I do not have a amplifier currently. Since the Sonos Connect is discontinued product my thought was to sell it and purchase a Sonos Amp and feed that into the speaker selector to power my speakers. This would reduce the amount

I've just got a Sonos Connect (gen 2) second hand and a pai of B&W WM4 outdoor speakers. I don't have an amp so I'm considering buying a Nobsound or Fosi Audio mini Bluetooth amplifier (under €100).Has anyone used either of these mini amps with a Sonos Connect? Your experience? 

Hello, Quick question, SONOS ONE GEN2 and SONOS ONE SL are the same product, but for the microphones. I noted that  SONOS BEAM and SONO MOVE use their microphones also for optimizing the sound, and not only for the assistance. I was wondering if the Sonos One Gen2 do the same time (or will do), or well, if its microphones are only for the assistance?? Thank you ! 

I know this topic has been discussed before, but all the topics I could find have been closed for discussion.I would love for Sonos to add an option to have zero line-in delay in exchange for the inability to route the line-in signal wirelessly to other speakers. This is for music making purposes. Others have mentioned turn tables, in my case it’s keyboards/synths connected to a Sonos Amp.I love the Sonos Amp, I have it hooked up to my TV, and I love the ability to have it play my Spotify in my living room and other rooms together.But there is a real use case, for me as well as for others who have posted before me, to use a given Sonos speaker (and in particular the amp) in a wired-only setting with zero latency.  I know I could connect a Sonos connect and a dedicated amp to my living room speakers to get that (and bypass the connect when I need zero latency), but then I’d lose the automatic turn on/off feature of the Sonos Amp for all the times where I just play regular music over it,

HiI have a play:1 stereo setup in my citchen and a Arc/sub setup in my living room. I've just purchased a pair of Sonos One gen 2. Which pair would you use in a surround setup?

Hi all, So I purchased the LG OLED55GX and was really keen to set it up. However, I'm gutted that it's currently not connecting to my Sonos arc. The cables are plugged in to the correct slot (E-Arc). On the TV, it says that nothing is plugged into the second HDMI port. On the app when I go to setup, it says HDMI arc not detected. Has anybody experienced this and come across a fix? Many thanks, Adam

Has anyone heard of Sonos intentions of future firmware updates to allow the ability to independently increase the volume of the upfiring drivers on the Arc? If this ever occurred would it improve the Atmos experience by possibly hearing reflected sounds from the ceiling? Thanks in advance for any answers or knowledge shared

Hi, can Sonos play itunes? Doesn’t look that way… please let me know so I can bring this product back to the store if not. Thanks