Show off your setup or get inspired by others
Recently active
Afternoon all,Bit confused. Removed a SUB from the kitchen environment and replaced it with a new one. Only reason was the colour! Kitchen redecorated in white and a white sub fitted in more 😀 The (removed) black sub I created a location for in our Hall / Stairs area. That area already has two pairs of B&W CCM 682’s in ceiling … one pair in hall, one pair on landing. Also an existing Sub on landing. Tried to add that and indeed the device was reset and added to the environment. But when I try to add it to a room, only three Amps are visible. Interestingly the new black square Amp’s. The slightly older Connect Amps do not show in the app yet they are S2 compatible. The Hall/Stairs/Landing device is an S2 Connect Amp. Arguably it could benefit from an upgrade to the 125W unit but surely that should show and allow the second Sub to be added to it? Any ideas on that? I’m going to do a full network reset tonight and see if that helps. it’s been a while since it was all rebooted. The S2
I have two rooms next to each other and I'm going to put a Sonos Beam (Gen2 ) in each of those rooms. Each soundbar will be connected to a tv.1.Is it possible to pair the two soundbars and listen to the same music?2.Can I hear what one of the televisions gives on both soundbar at the same time?3.Putting the TV in mute mode, can I listen to music from the app and the TV broadcast continues to play?
Heading to a boys cottage weekend and have a choice of what to bring for stereo music setup.cottage has wifi speakers will be placed inside in a large open room Pair of Play 5 Gen 2s stereo paired pair of Sonance by Sonos outdoor speakers powered by a Sonos Amp (newer one)which one should I bring to maximize sonic characteristics?
I just bought a Panasonic TX-43LX650E Android TVTM and I can’t get the remote control to run my SONOS system. Is there a solution or is it preferable to buy another controller? If I need to buy another controller, any advice on what command to buy from Amazon to manage TV and Sonos? Thanks
Good morning, I am seriously thinking about buying a sonos ARC, my doubts arise when I see that there are several models, could you tell me what differences there are between sonos arc ARCG1UK1, ARCG1AU1 and ARCG1US1, if there is any. Thanks.
Hi, in the current version setting up an alarm to play your song in playlist automatically puts it in a repeating loop. Also there is no option to stop the alarm automatically when the song finishes. I would like to request Sonos to make:1. repeat loop an option in alarm settings whether you want to repeat or not?2. Have an option to stop alarm when the song finishes, in addition to the current method to set a time limit. like the suggestion to make Sonos make the changes. Thanks
Trying to fit a Port and One in a tight space. If I place the One directly on top of the Port, there will be plenty of airspace around the units. Will this be ok? An alternative would be to set the port on its side. Would this be a better option? ta
Hi,I’m sure it’s been asked before but can’t find the answer… How can I use the Sonos app on my phone to connect to my car speakers via Apple Car play? Thanks!
is the Sonos Beam Compact Smart Sound Bar - White826/8208 at argos compatible with generation 2 products
Hi! I am using playbar and sub with two play 3s as a rear. Movies are excellent but muaic is lacking. The 3's and sub sound really good but the fact they are behind my seating position puts me in a "inverted" sweet spot. Granted, i do not have the urge to listen to muaic in stereo ofren, but still i like to enjoy it from time to time.What would you do of the folowing:1. Buy a pair of ones and put as rears and.move the play 3s on either side of the tv and use them for.music2. Buy a pair of ones and put them on either side of tv and use them for music3. Buy a single five and use it for music only4. Buy a move for.music onlyThank youNeven
I think you owe your supporters ( the consumers who buy your products) more information on the updates that you put out. Explain what they are for and what fixes and changes are expected. This “ bug fixing description ” is poor judgement coming from you.
I’ve spent more time trying to fix this system than I’ve been able to actually enjoy it. Why spend so much money on a sound system that constantly fails? Sonos, wake up and actually provide support for your customers. This system constantly disconnects from my TV and it’s impossible to reconnect it. I’ve had to reset all of my connected devices countless times. Typically I just disconnect it because it isn’t worth the hour(s) of troubleshooting to reconnect it just to see it disconnect again. 100% do not recommend Sonos at all. For the same money I spent I could’ve gotten a sound system that didn’t rely on wifi and BT to connect (very inconsistently).
Moving from the Netherlands to Dallas (TX, USA).Bought my Sonos Beam, Sub and 5 Sonos one’s in the Netherlands and wonder if they would work in the US with a simple transformer? Or would that not work?
Is it possible to set Sonos 5’s up as a pair, but have them both playing mono/the same thing (rather than stereo)? I realise you can group the speakers, but controlling them in a group using Alexa is less effective than as a pair. Due to the position of the speakers in the room, having them playing in stereo can sound odd. Thanks
Hello allIm aware this is a question that has been asked before but im yet to find a solution or answer that i understand.I have a client who has an old Cob house with super thick walls. We have wired in TP-Link access points to each room with a single SSID on Auto channel configuration. This is so all devices can roam inside and outside on the same network seamlessly. This works fine for all phones and laptops etc.With the new Wireless network in place we reconfigured the Sonos system setting up as like brand new. When in the Kitchen, id reset the Play1 Sonos then it would appear in my app and add as usually expected. When i then walk in to the Lounge. i see the App look like its lost connection as the username etc goes Grey, then after 15 seconds it appears white and showing connected apart from its no longer showing the Kitchen Sonos device. I continue by resetting the 2 x Lounge Sonos Play1 devices and add as a Stereo pair again in the usually expected manner. I can now see both co
A cool feature, I think, would be to have a countdown shown on the Queue screen. Hours, minutes, and seconds. Not sure that its particularly useful, but, strikes me as a nice-to-have.
Hey all, thanks in advance for any help/advice/pointing out errors in my thinking.I have a Home Theatre (HT) setup in my 4m x 8m family room/kitchen space. It consists of an Onkyo 5100 wired to pre-existing built in front and surround speakers with a decent center channel and power sub, which I don’t want to replace. All those speakers are in the 4m x 4m family room side. I have a Sonos Move in the kitchen side of the space which is used for music and Alexa functionality - set timers, add things to grocery list, etc. I’m about to upgrade the kitchen and want to tie the two sides of the room together, with a Sonos Amp replacing the Move, so that I can a) listen to the same music through the HT setup or b) get the HT audio playing on the kitchen side. Eventually I’d like to add speakers outside which can do a) and b) as well. I’ve read a lot on this forum, the Sonos product instruction and installation guides and other sites but I’m still not sure if I can get it to work as desired.To st
Afternoon all. Have a feeling I’ve asked a similar question before struggling with way forward on this one.I have a Panasonic GZ2000 TV in a small/medium size viewing room. It has built in Dolby Atmos speakers (think 11 small units from memory) but does not really delivery on it’s promise sound wise.This is linked to a Sonos Amp and two B&W CCM682 in ceiling speakers. There is a budget wireless sub woofer as well which does OKish. I’ve been thinking to add an Arc, a pair of Ones and a Sonos SW. I previously installed positions for RJ45 & power for the Sonos One’s and the TV has power & Rj45 at the rear to run the Arc off. Same with the SW position.But …. the Sonos Amp feeds the two in-ceiling B&W’s and they are logically in the wrong place. They are in line with the TV rather than left & right of it. Why? Originally the room was supposed to be just for listening. Then at the 11th hour (after speakers were installed) the plan changed to be a viewing room. I’ve attach
My surrounds have stopped working over the past few days and I have removed and re-added them but still not working. I have an Arc, Sub and a connect amp connecting 2 surrounds. All are S2 using 14.2. If I set up connect as separate zone all sounds plays fine through my surround speakers, so I know amp is working. When I reconnect them as surrounds Sonos adds them ok and connect Amp can control volume of Arc no problem but no sound coming from surrounds when playing music in full or ambient mode. I have tried to toggle surrounds on and off. I have also tried trueplay tuning but when it starts it says some speakers appear to be missing. Is there a way to roll back to version 14.11, and has anyone else experienced this issue since the update 4 days ago? cheers Lee
Hi all,I am considering the following setup:Sonos Arc as the “CENTER” speaker. Sonos Amp to drive my passive HECO L/R speakers.I would hardwire the Arc to the TV via HDMI/ARC and add the Amp as L/R. Will this work? There is no need for surrounds!Thanks!
I have line in set to autoplay from the headphone out of my tv . The sound is fine when I switch on the tv but if I switch to a smart app say amazon,plex etc the sonos goes to silent You then have to go in the app and hit stop then play again to resume audio despite the fact the audio source remains line in all the time.
Hello,We are hosting a destination wedding and need to bring a portable speaker set up for the after party. What I am trying to figure out is if 2 Roams connected vs. 1 Move - which is more powerful? I feel like 2 Roams would give me more flexibility, but if they wouldn’t be loud enough (even combined) - I would like to know. Given that Sonos doesnt provide any sort of sound statistics for their devices, I am trying to determine how I compare these options to buy the right set up. Thanks in advance!
I’m looking for the best way to make a TV that is outside and connected to Wi-Fi a source within the Sonos ecosystem. I could connect a beam to the TV, but I am afraid of the outdoor humidity. Thoughts?
I got an Amp and will wire around my terrace, which is currently broken in two areas and I want to have 2 speakers on each area.My plan is: I’ll run them in Dual Mono and have two speakers on L and two on R, (L&R being each side of the terrace) Is there a way I can have each side have different volumes?I don’t mind if it’s the same music, but for example one side has a summer kitchen / dining and the other one has a lounge area, so settings / conversations might different so different volumes might be appreciated.The most logical answer is get another Amp but that would require me to drop another $750, is the a simpler way? anything “simple” that can be done in the app? any kind of volume control in the wiring that might help / recommended? I am DIY’ing this :)
Can I get my sonos system work from a laptop ? If so what do I need to download gone on the sonos website clicking the button for download and nothing Can you also get the app to work on I pad ? cheers
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.