Spaces & Setups

Does anyone know if it's possible to playback video podcast audio to Sonos? All of my video podcasts are greyed out in the Sonos app. I presume because Sonos doesn't support the video file playback.

My library lives on a Synology NAS, and I've succesfully played music from there for months. Recently, I had reason to clean up my NAS user list, and I'm afraid one of the users I cleaned out was the user Sonos was using. I suspect I allowed Sonos to use the Guest account, and I've disabled that.Is there a way to modify the credentials used by Sonos to access a network folder? I'd strongly prefer to create a specific Sonos user on the NAS, and use that to access the folder from Sonos.(If not, I'll just re-enable Guest with read access to the music folder.)

Wondering if this is a known issue or if I have a defective Beam gen 2 that I just bought. With TV on volume up works and volume down always seems to work. Worked fine with my Beam gen 1..

Hi y’all! I’m thinking of putting Sonos Architectural speakers in my kitchen and living room. There would be one pair in each room. I understand that a single Sonos Amp can handle 2 pairs of Sonos Architectural speakers. For each pair of speakers, I’d like the ability to play music in either set or both sets simultaneously - this is a must. When playing audio in both pairs simultaneously, the ability to control volume in each pair independently would be nice to have, but not necessary. Can I achieve this by using a single Sonos amp? If so, do I need any additional components to make this work? Appreciate your advice. 

I am looking to buy the Sonos vinyl record player.  I would like my record player on one side of the room and the speaker on the other side.  I do not want to have to run wires through the room i.e. under the carpet.  Is there a Sonos option to wireless ly transmit the record player to a Sonos speaker?

I have Sonos arc at the family room with its wifi password. In addition I have two Sonos Roam in bedroom with different wifi router and password. My question:If I started listening with the arc in the family room, and I want to continue liststening to the same music, how can I do it with different wifi?thxM.

I’ve got a brand new surround system consisting of the Arc, Sub 3, and two One SL for rears.  I’m using an LG C1 OLED and a Sony UBP-X800M2 blu ray player.I have the blu ray player set to PCM for audio, downmix is set to surround and but rate is set to 192.  On the TV I have the HMDI audio set to PCM and eARC is enabled.I am running hdmi from player to the tv, from TV to soundbar.When i fire up Interstellar which has a DTS soundtrack I’m only getting Stereo PCM displayed.  I understand that the Arc has limited DTS support, but shouldn’t I be getting multichannel PCM feed into the Adonis?Do I have something set up incorrectly?

Hey all - hoping for some help..I have a sonos beam 2 hooked up to the tv, and the back of this same room I have a sonos 5 plugged into my record player. They are set up as seperate rooms.what I am wanting to do is get a PAIR of sonos ones.. I will then put them in the back of the room toeard the corners. I will create a pair and set it up as a home theatre to my soundbar (I am confident this will work) what I then want to have is the option to play music from my sonos 5 which is laid down on its side (which apparently makes it stereo although no obvious stereo effect obviously !) - and have stereo music coming from the paired ONES.  I hope that makes sense.. in my head I know what I mean, keen for your thoughts ! thanks 

Hello:  While my sound bar usually works great with my older Samsung TV using the optical out cable, it recently stopped working with my TV.  It does however work with my Sonos app when playing my steaming services, just not on TV.  When I try to deploy “TV” sound from the Sonos app now, nothing in the sound realm changes on my TV and I am stuck using my tv standard sound.  When I go into my TV settings to choose “Optical output” or “Optical sound” it is not an option now as this menu item is greyed out and I cannot access it.  I can also not do a “reset” sound because I do not have a tv remote and am using the TV navigation on the side of the screen and it won’t allow me to access the “reset sound” selection using the manual navigation.   Any thoughts or tips on how to get it working once again?  Thanks!

Hello everyone,thanks for reading the post.I need your help and opinion for our new setup. I am setting up the TV (LG G1 55) and an audio system. I would like to mount a sonos system and add two B&O beolab 8000 speakers. I would like to use all sonos + B&O speakers both for watching TV and listening to music.An initial idea of the setup that I think could work is as follows: Assumptions:- The sonos elements on the TV side will be connected via RJ45 network cable, the rear ones via WLAN.There are points that are not clear to me:In TV mode, can I have problems with sound delay? The sonos Port will automatically turn on the beolab 8000? or will I need to turn them on with a remote control? Will the sonos Port automatically regulate the volume of the beolab 8000? Wich cables I would need? There are specific Almando preamplifiers for B&O that are usually connected to the Sonos Port, do you recommend to use one? or you don't see it necessary?Do you think the setup is correct? do

As the title says. My alarm is turned on, but, isn’t playing. Also, I set the sleep timer, and it doesn’t turn off. Music plays just fine otherwise.

I want to add some outdoor speakers to my system ideally 4 in 2x separate areas. If i purchase a Sonos AMP 1 will that work just the same as the new version - thinking it’ll save me a fair few quid.  thanks

I can see my playlists using search/add track to playlist - how do I restore them to my home page?

Hi. BBC sounds app is not visible so cannot play BBC stations. many advice? 

I have a surround (Beam+sub+2xOnes), a Move and a Roam. I’m unable to see more than one product in my system. In the case of the Roam and the Move I cannot pair them as stereo because the system never detect both at the same time. If I turn one off, then the other is showing in the app.I tried factory reset all of them several times and make sure to Add product (I read a post where the problem seemed to be that the products were created in different accounts, but this doesn’t seem to be my case). I tried resetting the router, try to find the missing products, etc.Any more ideas? Thanks!

We’re new to the Sonos world and just installed the sonance outdoor 6 speaker / sub package that included the Sonos amp.  We’ve also got two Yamaha outdoor speakers mounted on our back porch and a surround sound receiver that is connected to our TV and ceiling speakers in our main room.  Trying to figure out the most efficient method to sync the two outdoor speakers on our patio and the surround sound system inside to the Sonos amp to create two additional “zones” to our existing sonance zone - any suggestions? It looks like I could get a Sonos port to sync one or both of those? Or would I need one port for each of those?

I currently have an Arc, a Sub and pair of One SLs, which sound great. I’m thinking of trying to connect my old Technics 1210s via an analogue Pioneer DJM-300 mixer (which should have the necessary pre-amps) and then a PORT.From what I’ve read, this sounds like it should work OK, and my primary purpose would just be for playing vinyl, but I’m wondering if it would be feasible to use this setup for actually mixing tracks. Would there be too much delay for that purpose?

Greetings. Currently have older discontinued Sonos multiple room set up and looking to upgrade. All rooms have in wall speakers that came with house (not sonos speakers) and set up with older Sonos amps. is it better to get new Sonos amps (would need 4-5) and connect to existing in wall speakers or just get a bunch of Sonos wireless sound bars and speakers for rooms?4 of the rooms have tvs, other rooms/patio do not

I have an arc and would like to pair a speaker with it so a hearing impaired person can use it when watching tv. Can this be accomplished?

I have a new Bluetooth record player amd would like to find a way to connect to SONOS One speakers....I have 3 of them already.Is it possible to use some converter like… Bluetooth Audio Adapter for Music Streaming Sound System, esinkin Wireless Audio Adapter Works with Smartphones and Tablets, Wireless Adapter for Speakers  

How to add existing Sonos product to the new room?Please let me know on this 

Is there still no way of removing the Sonos Radio menu option?

New BT router. Now no operating Windows S1 controller!All parts of the Sonos S1 system working, except the CR200 controllers, which now display the BBC Sounds and Qobuz Music Services, but cannot access either. S1 mobile apps working, but what a drag they are - sucking the life out of the battery and never with you when you need a controller!However, back to the Windows S1 Controller. It states it cannot see my (existing) system. I have tried all the suggestions: restarting the router, restarting the Bridge (I do not use WiFi to connect), uninstalling and re-installing the Windows Controller. On set up of the re-downloaded Controller, set up states the “app” is ready, however the Conroller continues to state it cannot see my system.Any advice gratefully received that does not include ditching the Controllers and solely using the mobile and iPad apps, or using WiFi to connect (it needs an ethernet cable to the nearest speaker, which being a Play 5 is not easy to situate to connect by ca

Hello everyone,  I just set up my Sonos Arc on a new samsung tv model and everything works fine, but the tv doesn't shows the volume level with numbers. Using the tv remote (ore the Sonos app) I can turn up and down the volume, but I can t see the level of the volume. Is there some setting that I missed? Thanks

Hello,I have tow Pay:1 units that were connected to Sonos 1 controller app. Then I moved to Sonos 2 app. Since that day one of my Play:1 is considered “not compatible”. Error 30 keeps popping… Is there any way that unit can be updated? I don’t really want to operate 2 Sonos with 2 apps as recommended by Sonos. Tks.