Fix & Optimize

The Sonos app will not find or recognize my Beam.  I’ve tried everything that I know.  This is so frustrating.  I was about to drop another $2K on more Sonos products.  Not now!  I’M GOING TO PURCHASE THEIR COMPETITORS PRODUCT. YOU SHOULD CONSIDER THE SAME.  Companies that make customers jump through hoops and still leave them with unresolved issues eventually go out of business.  Sonos is on there way down that trail.

Bonjour Je n'arrive pas à associer la platine Technics Bluetooth SL 40CBT à mes enceintes Era100Help 😵‍💫

I’m having real connection issues with my Sonos System. This weekend went to use it and only had my Move speaker connected to my app. All my other speakers we showing ‘Not Connected’ in the Settings page.I had restarted to reboot each individual speaker, doing a reset and then adding it to the system. After adding a couple of speakers, suddenly everything was working. They all appeared under my app.Lasted for about 5 minutes and now they have disappeared again apart from my Move speaker and showing ‘Not Connected’.Have rebooted my router and no joy. I have a Deco mesh system but have removed my Sonos Boost a few months back as it was my understanding that a Boost was not required. Has been working fine until recently.Any suggestions? Is there an update that has thrown the system?Thanks

I struggle with the size of the pin head buttons on the volume sliders.  This is a replica of an earlier thread 9 months ago that has not been actioned.  As this seems to be such a simple change, I am submitting a fresh new request in the hope to express further interest in this update.  Thanks.

I am a complete newbie to this so answers in simple format would be greatly appreciated! I am about to purchase my first Sonos product(s) - the Era 100 smart speakers. I am told that I can input from my old standalone turntable to play some of my vinyl which would otherwise be u/s. Question 1: what do I need? I see a pre-amp mentioned. Would this just be something simple like a Behringer PP400 off Amazon? Anything else?  Question 2: can I connect two smart speakers for true stereo and if so what more do I need?  Any advice greatfully received.

I am considering getting rid of my sonos system due to it’s very poor response. Having invested in the system I am loath to change everything. My Play 3’s are hardwired, whilst the Play 1’s and the soundbar are wireless. Android app can take minutes to fully start up where I can control the system, the lag on volume control is appalling. my wireless runs at 380mbps so it isn’t slow, each sonos has a fixed IP

BonjouRpeut-on coupler une Playbase avec les enceintes ERA 100 en surround. (Arrières).merci 

Can someone help me reconnect my Roam? After switching internet provides, I haven’t been able to connect my speaker to Spotify. I have restarted and deleted the app. I have turned off the speaker, unselected it from bluetooth. I have restarted and restarted until I am now on this community asking for help.

My Sonos Ace Headphones will not connect consistently with the App on my brand new Oppo Reno13 phone. I have retuned 2 previous pairs of headphones with the same problem. The current (3rd pair) at least connected with my Oppo to allow an update but now will not reconnect. Bluetooth pairing works fine, it’s just the app which I unfortunately need to listen to Spatial Audio (Atmos) through my streaming service. It is extremely frustrating as Spatial audio is the primary reason I bought the headphones. I have the same problem on my old Oppo phone and also a really old Samsung S9. I have tried everything suggested in similar threads such as re-pairing, factory resetting the headphones, clearing the cache, rebooting the phone, tried Sonos support 4 separate times and all combinations of the above. The only thing I haven’t been able to do is connecting via an iOS device as I don’t have access. I cannot believe that I am alone in this problem with Android but all I can find online is people w

Alexa+ has recently been dropped onto my Echo Dot and it has made routines helpful

I have updated SONOS, TIDAL, rebooted my router, uninstalled and reinstalled both, and still no solution. I have not re-authorized TIDAL because that selection isn’t available on my app. I am really close to closing my account and going elsewhere, especially when there is no human customer support.Any suggestions? Note, the Windows desktop app works fine. TIA. 

I have a full set up in my living room and I have just no go an arc set up for another room wort 4 gen2 and a gen 3 sub but it won’t set up as a separate system on same WiFi, done everything it’s asked but it just won’t find the new system any of it. 

Dialogues in my sonos playbar sound metallic, like an old radio.

I recently purchased a Sony QN65QN70F TV.I also have an AppleTV 4K and Sonos Beam 1st Gen.I currently have everything connected as follows: AppleTV → Samsung TV → Sonos Beam.I am pretty sure the AppleTV 4K supports Dolby Atmos.The TV does not.The Beam does not.My question is, if I upgrade to to Sonos Beam Gen 2 will I get Dolby Atmos out of it, or is the Samsung TV going to keep that from happening.Thanks in advance…..Bob

Hello everyone! Can someone please help me identify what “Model S14” means under the Sonos beam soundbar? Thank you!

Pocket Casts not showing any podcasts and when I try a reauthorize it says check the internet connection.  There’s a Reddit thread with several reporting the same issue. 

Is there a quicker way for the app (android or PC) to speedy up the scanning of a music library on a NAS on my home network, or are there any plans for Sonos to change the way to access this content?I have a reasonably large music collection (nearly 60,000 tracks over 4,000+ folders), if I push new audio up to the NAS, I need the app to rescan the content before I can play it.  About 20 minutes each time (if I’m lucky).  Isn’t is about time this element of the app is rewritten so it works more like a File Explorer/My Files type of program?  You just upload, drill down to the content and it’s visible instantly?  (And yes, I do know you can set the Music Library to update overnight.)It’s 2025.  It’s bonkers having to do this nonsense.

Hi everyone. Please excuse me I am not very technically minded just need a little help. I am replacing my era 100 (2 of them) with era 300. Do I just need to add them to my existing system & then follow the app instructions? Many thanks for your help & any info you think  might help would be great. The era 100 are going in another room by the way.😃

Hi everyone,I can’t find the way to have two different systems on my house. I’ve read some posts, buy they are not exactly what i Want to do.I want a System A with a Play 1 and a Play 5 with a turntable, they are streaming from a NAS A.I want a System B with several Connect and Amp, they are streaming from a NAS B.Today, everything is in the App, but I want to isolate the system A to it’s own phone App et system B too.What is the correct way to do it ? Create a second account with another email ? Using another wifi network ?I’m lost.Thanks in adavnceJerome 

So frustrated with SONOS.  Loved it when I purchased when two Play 5 speakers and bridge in 2011. Great sound. Rock solid App.  Then a couple of years ago, purchased the new generation Five’s. But there is no bridge. The sound is great. However the APP is terrible. Not user friendly.  Not stable. Too many times I can’t play anything. This would be embarrassing if I have company. I thought they were working on a better app but obviously not getting anywhere. I still have one of my old speakers with the old APP. Works rock solid. They keep sending me emails about purchasing new products. No way! Moderator edit: Changed “Play:5” to Five for accuracy

I have a Sonos Beam Gen 1 and 2 Sonos IKEA Symfonisk Bookshelf Speakers connected.In order to be able to use this set up as my audio source for my Mac mini M4 I have the Mac connected to the Beam using:Mac connected to a USB C to SPDIF Optical Audio Output Adapter with 192khz/24 bit DAC This is then connected to the official Sonos Optical Audio Adapter  This is then connected to an HDMI cable which goes into the Beam.With thanks to ​@wheee09 who suggested this method in this thread 3 years ago. When I use the Apple Music app on my Mac to play music with the USB SPIDF Adapter selected as the source it works perfectly. Audio from the browser (Safari and Chrome) also works fine (for example YouTube). However when I launch GeForce Now (a gaming service) on my Mac the rear bookshelf speakers have a faint rippling/warbling noise coming out of them. Q - does anyone know what might be causing this and if there is a fix? The only thing I can think that is different between the three sources I’m

Bonjour,J'ai acheté un appareil sonos chez ikea pour placer dans un appartement en Corse. Il fonctionnait lors de mon achat en Belgique. IEn Corse pas moyen de le connecter.Impossible de trouver l'appareil quand je lance l'application sonos ?Que faire ?Merci pour votre aide

Hello!I red here that it is impossible to connect my new Sonos Ace headphones to my Sonos system to hear music via my project T1 SB turntable connected to Sonos Port. T1 SB has no Bluetooth. The only possibility would be to buy an other turntable with Bluetooth. That’s a pitty. Do anybody know, if Sonos will develop a new function to make this work in future? Br, Frank

Jak odtworzyć utwory zapisane w telefonie na moich głośnikach 

Beam Gen 2 with Symfonisk SpeakersI have a Beam Gen 2 soundbar and recently got 2 IKEA Symfonisk speakers (one Picture Frame and one Floor Lamp). I can see them in the app and play music on them, but I'm unable to add them as surrounds to my Beam. I also can't set them up as a stereo pair.Troubleshooting steps I've already tried: Moved all speakers to a new room Created a new room and moved everything there Factory reset each device and tried re-pairing - same issue When I tried putting the 2 speakers in setup mode to add them as surrounds, the app wanted me to add them as new speakers instead of recognizing them for surround setup I haven't tried using Ethernet since I don't have easy access to ports nearby, but I don't see why that should be necessary for this.Has anyone else experienced this issue? Any suggestions would be really helpful. Thanks!