Fix & Optimize

Era does not have blue tooth connection  Does not connect to network 

I would like to set up two era 100s with an era300

After two calls and several hours on the phone with Sonos, I cannot connect the library to Sonos S1. Sometimes Sonos doesn’t find the existing system and posts a firewall problem. There is no firewall.I have made Music folders shareable, granted Sonos full disk access, and rebooted everything.Has anyone found the magic settings to make the system work? If so, please share. 

Still missing the alphabetical jumplist sidebar when trying to search artists in My Library essentially rendering app useless.  I’m not gonna scroll for 5 minutes to get to Yo La Tengo.  Please figure this out sooner than later.  App has been FUBAR for quite a bit.  Any fix on horizon?

Can you connect a record player / turntable to the connect gen2 from sonos. That the sound then enters the whole system. The record player has its own build in amp.  

I cannot believe that the app has still not resolved basic functionality and is so slow in response times. I am sick to death of apologists telling me it's my connectivity. It is not; Sonos seem prioritising rollingout new features as pose to resolving essential issues such as stop, start, volume variation etc. Luckily I still managed to protect the old app on my PC, and this works like clockwork. However, the moment I use the new app you want to smash your he'd against a wall after 5 minutes waiting for it to respond. I would ask that the Sonos plants in these threads don't start telling it's my wifi. It isn't.

I setup my Era 100 speakers using the Sonos app on my iPhone. I bought them to use to play sound on my iMac computer that I just purchased.  How do I set them up for use on my iMac?

I hired Best Buy to update my Sonos system which has been broken since April or May.  By broken, I mean that there is no old or new version that meshes with Windows 11 version 26100.3037.  Is Sonos assisting them in at least getting my digitized albums to create the catalog by browsing to my music folder and updating my system?  Further, is there currently any ability to play my music?

I have a turntable/record player connected to one of my Sonos Era 100 speakers. The connection is through a RCA/3.5mm cable + Sonos line-in adapter. I’ve managed to get it working with the single Sonos speaker. But when I try to set up the speaker with another Era 100, as a stereo pair the output from the record player stops working. I’d like to be able to use my speakers in common way, through my phone/laptop but also connected to the record player. Is it possible to play the output from the turntable in stereo mode? 

Left speaker is working fine but right speaker is flashing green and not playing. How do I get it to play again? Thanks- 

I have client that has a sonance 8 channel amp. We want to hook his TV up to the amp for the speakers. How can we do this? The tv is outside so we can't run an Hdmi and he doesn't want a sound bar. I was told that he could get an audio video receivers that can work off the tv through blue tooth. But not sure. Does anyone know how this can be done. Thanks Jeff Sequeira 

So my ERA 300’s will be here tomorrow and plan on replacing my 2 IKEA SYMFONISK.My question is once setup as a surround, if I press the Bluetooth button does it automatically allow me to use as Bluetooth or is there more to do in app? thanks in advance

I have a Sonos system that consists of two Play:5 (Gen 2) speakers, two One (Gen 2) speakers, and five One (Gen 1) speakers.The two Play:5 speakers are in a stereo pair and are connected to an Ethernet port in my wall that runs to a UniFi switch.The Sonos system is on a VLAN that is separated from other VLANs in my network via firewall rules.  The devices (phones and laptops) that run the Sonos apps are on their own VLAN.My Sonos system generally works well in this setup and always has.  Occasionally, it seems slightly slow or it loses connection to a Plex server on another VLAN.  Also, when I install an update via the Windows app, I always get a message that says the update failed, even though it actually succeeded.  But generally speaking, I don’t have any major issues.I’ve allowed all of the ports listed on https://support.sonos.com/en-us/article/configure-your-firewall-to-work-with-sonos through my firewall rules, except for the Windows Media Sharing UDP ports, as I’m not doing any

I have a Sonos system that consists of two Play:5 (Gen 2) speakers, two One (Gen 2) speakers, and five One (Gen 1) speakers.The two Play:5 speakers are in a stereo pair and are connected to an Ethernet port in my wall that runs to a UniFi switch.The Sonos system is on a VLAN that is separated from other VLANs in my network via firewall rules.  The devices (phones and laptops) that run the Sonos apps are on their own VLAN.I’ve noticed that my UniFi network logs are full of entries (just about every minute) saying that one of the Sonos speakers was blocked by a firewall rule from accessing the PC that runs my Plex server.  Every Sonos speaker appears to be doing this.I’ve allowed all of the ports listed on https://support.sonos.com/en-us/article/configure-your-firewall-to-work-with-sonos through my firewall rules, except for the Windows Media Sharing UDP ports, as I’m not doing any Windows media sharing.The port on the PC that Sonos is trying to access is always the same (53957) but the

I have the Sonos Arc and Sub Gen3 and I would like to wall mount the Arc under my tv. TV is an 85” Sony and is hung on the wall with a fully articulated mount. The tv does not sit flush on the wall - it is 6 inches out from wall to the front of the tv. If I use the Sonos Arc mount or equivalent after market, the Arc will be almost flush with the wall and ‘under’ and not in front of the tv, even though I plan to mount 4” to 5” below the tv. Seems like the upwards firing speakers would go into and into the gap behind the tv.Does this pose any issues with sound quality or sound bar functionality? Does the Arc need to come out off the wall and be “in front of” the bottom edge of the tv! If yes, am I better off getting a scissor style mount for it (Sanus Extendable Sound Bar Mount) or mounting a floating shelf? I don’t really want to see the mount or wires - I already have a cable management kit for it, but really want to put the sound bar so far off the wall that yo can see the outlet and

My Sonos ask my again and again ti autorice the use of radio and the sistem dos not let my 

I have a problem, as soon as I listen to a song and I want to turn on the radio linked to this song, the radio titles change every second without having time to listen to them.

As in the subject, I have a spotify Premium Duo Account.Sonos in logged with user1, if I start streaming a Playlist from Spotify user1, every goes fine except that if I start listening with same user1 from another device, Sonos stops playing.Sonos neetwork is 4 Symfonsyk speakers Secondly, if the I starts streming a spotify user2 playlist, the streaming is interruptes ciclically by spotify advertisements like a free account). I user2 plays from spotify app there’s no any advertisments, correctly. How Can I do to solve?

Hi All, This seems to be a bug in the latest Sonos Update.it is really annoying as it defeats the purpose of having Sonos, it normally works fine on any station saved to My Tuner Radio (including BBC stations).All stations won’t play, it seems other users have the same fault. I have tried all the usual stuff (uninstall/reinstall the app, remove and add myTuner Radio as a service), fault remains.Sonos please supply a fix in next update so I can play a radio station via MyTuner Radio.Please help Urgently!Thanks, KJ

Bonjour,j’ai un Sonos One SL et j’aimerai le connecter à mon vidéo projecteur Xgimi Elfin Flip. Mais ce dernier ne retrouve pas l’enceinte sonos quand je lance la recherche d’appareil Bluetooth.  Or j'aimerais que le son de mes films sorte sur l’enceinte Sonos. Que puis-je faire ? Utiliser un câble ?  Moderator Edit - Translation by Google:Good morning,I have a Sonos One SL and I would like to connect it to my Xgimi Elfin Flip video projector. But the latter does not find the Sonos speaker when I search for a Bluetooth device.  But I would like the sound of my films to come out on the Sonos speaker. What can I do? Use a cable?

Ce serait intéressant d’avoir une option rapide sur une télé commande Sonos ou même via l’application pour basculer entre le mode surround et le mode stéréo. Cela permettrait de profiter des Era 100 en mode cinéma pour les films et en stéréo classique pour la musique, sans avoir à  passer par plusieurs menus.Je crois que cette option n’existe pas.  Est-elle en développement actuellement chez Sonos ?Une télécommande avec des boutons programmables, ou même un simple mode cinéma/musique dans l’appli, serait génial. Moderator Edit - Translation by Google:It would be interesting to have a quick option on a Sonos remote control or even via the app to switch between surround mode and stereo mode. This would allow you to enjoy the Era 100 in cinema mode for films and in classic stereo for music, without having to go through several menus.I believe this option does not exist.  Is it currently in development at Sonos?A remote with programmable buttons, or even a simple movie/music mode in the ap

I have a Beam connected to my Apple TV with ARC. The Apple TV is connected to the router via ethernet. It plays on my LG TV.I set the Beam to be the default audio output but it keeps changing back to the TV speakers. It changes when I turn the TV off and on and sometimes it changes when I choose a different channel. Quite annoying. Any ideas?

 Hello everyone. I have two ERA 300 speakers paired in stereo. I connected them via Bluetooth to my Samsung The Frame TV. Sometimes I have sound, but most often I don't. Does anyone have any idea what I should do?

What do I do to play the music in my iTunes library on my Sonos connect? I’ve set sharing on the iTunes but after that I’m stuck. Read stuff about setting file pathways and stuff but franking it’s baffling.

I have an Arc connected to my LG TVIt used to occassionally give me an issue where when I switched inputs I would get no sound.Usually turning it off and on a few times would finally get it working. Then about 3 weeks ago I added another HDMI device to my TV and now it is difficult to get sound when I turn the TV on.Intially I was going into the sound source and changing to internal TV speaker then back to HDMI arc but would take a few attempts. Sometimes it would take 5 minutes of fiddling before it started to work. Very annoying. However I have discovered today that if I sit and wait for about 4 m inutes the sound fades in. This  has only happened twice so the jury is out. I often play music on the Arc during the day and then the TV goes on at night.I have a suspicion that it does not like changing sources and that is what the problem is but this needs more time to figure out Any help or advice would be welcome Thanks Steve