Components and Architectural

Can anyone advise on the best location for the boost to be sited.  Does it benefit from being a certain distance from the router and other electrical components?

Hi - I’ve got 12 Sonos AMP hardwired to various in-wall and ceiling speakers thoughout the house and exterior. It seems silly to have them all on 24/7. I’d like to plug them into a managed power supply on a timer which would effectively “pull the plug” on them at 10:00 PM and plug them in again at 8:00 AM.Question: Is there some sort of sleep function I’m missing which would make this unnecessary?Question: Is there any reason why this sort of repeated powering down would be harder on the units than turning them on and off with the power button? 

Hi,Quick question about ceiling speakers please. I can see the dimensions online for width and depth but can’t see anything relating to the maximum thickness of plasterboard / wood that they can fit on. Looking at the pictures it secures with clamps so just wondering how wide these go if anyone knows? Would it fit on a double layer of plasterboard for example? Also with one pair I assume I just run one cable back to each side of the amp, rather then daisy chain?ThanksSteve

Hi, are there any online templates I can print off for the ceiling speaker cutout? If not is any one able to confirm the size in 210mm? Cheers

Hello.I have a question because I could not understand it well after reading the user guide.I currently have a USB DAC and a power amp connected with RCA cables.I would like to connect the SONOS Port between the USB DAC and the power amp with RCA cables so that when playing from the SONOS app, the volume is controlled by the SONOS app, and when playing from the USB DAC, the SONOS Port on the USB DAC side will reflect (not change) the volume .Is this possible by setting it to pass-through?

I recently moved house so my ISP, room layout, etc. are completely different than my old situation which worked perfectly. In my old house I never had trouble with my Sonos Connect (playing music from my NAS drive through my stereo). But in my new house the Connect is cutting out. My Sonos One’s and ZonePlayer S5 are playing fine and I have a 1GB broadband connection, so the problem is clearly with the Connect. My Sonos system consists of a Sonos Boost, 2 Sonos 1’s, the Sonos Connect, and a ZonePlayer S5. The Connect is accessing the system via the Boost (WM=0 for all Sonos components).I can think of several possibilities:(1) The satellite in my Orbi Mesh network is not carrying the signal properly. I would ideally like to use a wired connection to the closest satellite, but the satellite itself has problems when I move it close to my stereo. So it’s currently sitting on the other side of my living room.(2) The Connect is ignoring the Orbi satellite and is trying to connect directly to

I have an Arc connected to my TV along with an associated Sub3. I also have 2 Amps that power 3 pars of of ceiling speakers (not setup as surround). Everyone now an then both Amps will drop out for a few seconds which is very annoying. I tried hardwiring (ethernet) one of the Amps to my router and it did not help.Will it resolve my issue if I daisy chain the Arc and the two Amps together? Or do I need to connect the Arc to the router?  In either case, I need to run the the ethernet cable behind the wall which I’m not ready to do unless I know for sure that it will permanently resolve the issue.I also want to mention that I have a PLay5 and pair of Play 1s so I cannot disable WiFi on the sytem

One of my wired speaker connections will not work with the turntable. I have tried switching and it is the connection at the AMP as the other speaker works when I switch. Additionally, both speakers work using a digital music service (e.g. Spotify). I have done a restart and a full reboot/reconnect and the problem persists.

I have 7 in ceiling speakers in my theater room connected to my receiver. When i want to play my streaming music with my SONOS App, i need to turn the receiver on and switch it to the correct output in order to use the App on my phone. What option do i have regarding playing my speakers with my mobile app without having to manually turning on receiver?  

How do I add multiple amps 

Hello just found a brand new zoneplayer 120 in the storage.I tried to set.. after doing rhe set-up procedure it said that theres an update.Bit it always failed and have error code 11.What i should i do? 

Hi everybody!I wanted to share something about my Sub. Yesterday my wife, while in the kitchen, decided to kill a insect on a vaulted ceiling using a two pound flour bag. Little that she knew, the bag bursted (just a tiny split, not all the way) and some of the flour got on the top of my Sub Gen2 and around it. I did not see anything in the Sub. After I experienced a tiny stroke :-), I grabbed the vacuum cleaner and cleaned the mess. Then I’ve put Master and Commander, Sub setting plus 10 and told my kids to go into their room. We did laugh about it how a split second moment of anger or simply not thinking things through could give you some not needed work. Now for the serious part.Do you think anything could have happen? How is the Sub constructed, Where is the opening (besides the obvious rectangular one)? Do you think that flour can compare to dust in consistency and the ability to enter the SUB? Is it wise to turn the Sub upside down and try to shake it or vacuum some more? P.S. My

Can the arc soundbar be integrated in a TV cinewall without loosing sound quality of Dolby atmos? If so, how much space should there be on each side (left, top, right) from the soundbar to cinewall frame so that the sound quality isn’t compromised? Many thanks 👍

Hi there, I’d be grateful on some advice on putting a dormant Connect unit to new use.I would like to connect a CD /radio to the Connect using line out/RCA cable so that the unit can play through my One speakers. Ideally, I’d want to set up the Connect to work with the speakers in the Kitchen, for example, so that whenever I use the CD/ Radio it automatically feeds through the Connect and to the speakers, without having to set up everything each time via the Sonos app; can anyone advise if this is possible?We already have the speakers in the kitchen, my wife wants to be able to play her CDs from a standalone unit and it would make sense to utilise the Sonos speakers. Although I have a NAS drive with all the music loaded, she doesn’t want the hassle of using the Sonos app to find the particular cd files each time - there are a lot of CD files to hunt through! 

I would like to revive a discussion , now closed:Specifically, it concerns how the S2 app responds to an S1 device on a separate network. My S2 network consists of two Fives (stereo pair) and a One, connected via wi-fi. There is also a separate Play:5 (first generation) hardwired via Ethernet and accessible via S1.Sometimes -- depending on my location in the house, my S2 app ‘sees’ the Play:5 device first. Quoting from the original post:I invoke S2 and get the message Sonos found on <my network name>. This system includes products that aren’t compatible with Sonos S2. (In other words, it’s found my S1 system first.) My options are (a) Open S1 controller or (b) More options Do I want to open the S1 controller? Nope. I’m in S2 and want to get to S2. So that leaves More options.Let’s examine those options. There are basically two:Forget Current Sonos System. Does this mean forget the S1 system (which the S2 app has just found) or the S2 system (because I’m in the S2 app)? If the lat

The other posts have been closed, even though this issue seems to be widespread.After installing a new router, my Sonos connects but my phones will connect to the app.We have changed the channels to 1, 6 , or 11 and set the wifi to 2.4.I have contacted support and was given this ticket number *********.We can change channels on the router, and the phone will connect for about 20 minutes, then we have to change to another channel to get the phone to connect for another 20 minutes.We have three android phones and two Iphones and all have the same outcome. I have tried resetting the app and resetting the router a dozen or more times. I have tried switching to Sonos one and have tried drinking wine, but nothing works after five days now.Has anyone resolved this issue? Is there something special I need to set on the router.?  Moderator edit: removed case number

Hi Again I hope everyone is enjoying their day…I have 2 questions 1 My tv has only got the following ports, a few hdmi ports one optical and one lan network cable (no vga) so am wondering how to connect to my Port 2 what is the digital out cable as I thought it was an optical connection but it is not Actually I’m very confused now as I have disconnected my boost and port and the system is still working fine??? Was I sold the initial connect and bridge which are not needed as it runs absolutely fine with my routerModerator edit: combined posts

I have been using a Nuvo system for about 8 years now that allows my 7 zones to all play separate audio. I have 2 3 zone systems and 1 single zone all integrated together. It’s rare (never?) that all 7 are playing and playing different things at the same time. I would like to change over to Sonos for various reasons and I need to know what to get to run those. All are hardwired and I run the zones from the app. I only need 2, a pair of speakers on my patio and a pair by the pool,  that I would like to be able to run TV audio through. The rest can just be from Spotify, Pandora, Iheart, whatever. If I understand the Sonos products, to run 7 individual zones I would need 7 amps. I can cut down the number of amps I need by pairing zones together. Those zones (pairs of speakers) would then become 1 single zone that would play the same audio at the same volume.  Am I right and  what options do I have for the zone(s) to run TV sound? I have read about HDMI arcing but the television and speake

Hi, I have 2 Sonos Roam and the Sonos Port. I would like to connect my Sony CMT-G2NiP to my Sonos System so that I can stream a cd played on the Sony to one or both of the Roam weich are placed in other rooms.I am new to this Streaming things and require some help how to connect these systems. my current setup:room a) Sonos Roam 1room b) Sonos Roam 2room c) CD Player connected to Sonos PortSo far everything works… I can play cd in room c on any of the Roams or I can stream from Smartphone to the Roams room d) Sony CMT-G2NiP with its own speaker connected … works fine  Issue: how to stream from the Sony to ohne of the Roams in room a or b? thanks for help

Can this be done? How? Currently using AirPlay adapter as a Niles audio source. ThankU.

Hello everyone, new here, I’m a bit of a technophobe where it comes to these systems, so please be gentle lol.I was initially sold a system with a connect and a bridge but updated to a boost a few years later as it stopped working due to becoming obsolete but recently had problems with connections and found out the connect has become obsolete too. So I am going to buy a port. My question is, I wonder do you have to put the boost a certain distance away from the router and the port? And also with the new port does that need to be a certain distance away from the boost and the router to avoid any interference.Thank you in advance 

 Hi all!After several weeks of testing and investigating, I eventually decided to involve you. Hope you can help me to bring some light into this topic. It is weird and not easy to describe. I do my best!Products:Beam2 2* Sonos One SL SubMiniFirmware of all devices is updated. So are the Apps on all mobile phones / tablets / computers.Beam2 is the main device. It is attached to the LG TV eArc.So far so good, it works. The iOS app as well as the MacOS app have issues to „connect“ to the system. The connection itself works. I can send commands to the system. Volume changes, play music … whatever. It all works, basically.However, the app(s) do not show the current status. When I open the app, the volume is zero, the music which is played is not displayed in the app. It looks like it is not connected. Screenshot attached - it was playing music while I made it. What I did so far.Plugged an ethernet cable into the Beam2. It is now connected via cable, the other speakers use the Sonos network

I’m currently using two SONOS Amps in a home theatre setup to power front and rear wired speakers. I’d like to add a turntable to my setup but understand that the line-in of the amps is disabled in this configuration. In order to add a turntable, would I have to connect it to a Port and then somehow play this through my Amp? Thanks

I am trying to connect Sonos amp to a passive sub and a receiver. Is it possible? The phone tech support told me that Sonos amp doesn't support passive subs. Is that true?

The power went out on our house and the sonos sysytem stopped working - tried to reboot but the connect ZP90 I use for ethernet connection has no lights on front - does this mean it is ded?