Show off your setup or get inspired by others
Recently active
Hello Expert,I had a 10 year old tv which I already replaced with a 164cm QLED.Now i have to replace sound bar. The old one is not worth mentioning. The room is 520 cm * around 500 cm (door on one side and kitchen at the other).My main problem is that the plan agreed with our bouwer does not have much space around the speaker compartment. The plan may not make sense, hence sending a photo of what we started with.My friend suggested Sonos Arc. I took some test in mediamarkt and like them as well. But the problem is that I am not sure how much space is needs above, below and on the side to give the Atmos affect.Renegotiating the agreed design with the builder is almost a deal breaker in Netherlands. And the again i might have to order the steenstrips etc, which may infinitely delay the project.Should I go for Arc or a lower variant? Or can someone suggest minor adjustment in the design that can help.Thanks a lot in advance
I can log into Sonos via website, when using the IOS app I get wrong password or email message. How to fix this? I have 2 new Ports on a new eero wifi/network. Both are hardwired. eero APP shows both connected to network. Port 1 has solid white light, I can AirPlay to this one. I can not log into it or see it on the network via app to add features. I get a message that both app and port need to be on same network, I only have 1 network. How to fix? Port 2, status light flashes: 4 short white 1 long red 1 short white 1 long amber 1 long green Then repeats. I have tried all resets I can find via web with no luck. How do I fix?
So, the long awaited sub arrived yesterday, and I've immediately set it up in my living room (which I believe falls into the Sonos definition of small-medium size) and paired it with Arc and One's as Surround and so far is one of the biggest disappointments I ever had from a piece of tech.I've played music, movies, tv shows and to my hears, I couldn't hear any differences, the sub at 0 is almost not audible, at 5 you can hear something, and bringing it at +15 finally showed some heavy bass, but I don't think that it is normal. On top of that, to me seems like the Arc and Surrounds are still playing those bass notes, instead of handing it down to the Sub and mid - high seems exactly the same as before, and I've expected it to sound better.So I've started experimenting: Tried turning the sub off, made no tangible difference to my hears Tried moving the sub to another room, so that I couldn't hear it, and to my hears the arc was still playing low frequency sounds. Tried turning off the
Can you shuffle stations?
Hi all,After a short two and half year my Sonos one gen2 decided to quit its loyal service. As you can see in the picture below, resistor c285 fried itself. Do you think after replacing the resistor it wil work again? and what resister do i need to get?
Is the hdmi cable provided with the arc is getting the best possible performance for sound??
A podcast I have listened to on Stitcher via Sonos for some time has just moved to be on Spotify only. Now searching via Sonos app for this does not find the podcast. When I search in Spotify app, it is there and I can play on my iPhone but when I try to switch playback to Sonos device, get error message for all Sonos devices “can’t play this right now”. This seems to affect only podcasts rather than playlist or artist searches. Am I correct in assuming that Spotify podcasts can be played via Sonos ? This seems odd if true. Any ideas welcome. Thanks
I have two Play:5s with a Sub Gen 2 and I use them horizontal with Trueplay disabled. Would putting them vertical make any difference to how they sound vs when they are horizontal?
Pretty new to the surround world. Been a Sound Engineer for 25 years so I focused on getting the best stereo sound I could.Just ordered a new Beam Gen 2 and have a couple of older Play:1 speakers. I planned on just keeping the Play:1 as multi room speakers, but I’m curious about adding them as surrounds.If I add them as surrounds, does this affect the Atmos playback in the Beam? As in, does it then try to play all surround content as 5.0 or will it play the Atmos content through the Beam while adding some rear info into the surrounds?Or are the surrounds ignored when playing Atmos content?Having trouble finding this information. Thanks.
I’m not sure how to contact Sonos regarding feature requests so I’ll just add it here and hope for the best: I would like to be able to adjust the amount of the “night mode” effect used. I live in an apartment and there’s only maybe a 2-3 hour window in each day where I can fully enjoy my surround system. Unfortunately that’s during the day when it’s bright in my living room.Because of this I have to use “night mode” almost exclusively when watching content. While it sounds great, it’s a bit too extreme for normal daytime use. If I could bring the effect down 50% it would be perfect. I think that a lot of users would appreciate this function and a lot of purists might be less disgusted to hear it was being used. 😁
With your time with your Sonos setups, what would you like to see Sonos add in future software updates that Sonos currently doesn't offer via software?
Hey allJust after some advice. We have a Playbar set up with two Ones as surround sound.We have a new Five and will connect the record player to.Are we able to add the Five to the surround system or will this have to be a standalone speaker?
I am a very happy and loyal sonos customer, (I am using a translator I hope you will understand my thoughts) surely there have been some requests in the past but I would like to ask the technical department 2 things .. 1) from the sonos app why don't you put a sound bar center channel equalizer?2) or create a free system in the sense that I use my play3 as left and right channel and arc only as center channel
Hi All - Just started my journey into using Sonos following some research and guidance. I’ve purchased an Arc for TV viewing and impressed compared with flat screen speakers. However, I need to improve on the Music atmosphere in the same room as the Arc (base seems lacking for my taste for general Pop music). I know general guidance for music depends on what music you play so a good example is Kyrie by Mr Mister using Apple Music. This song has vocals, base, stage, etc. Question then, should I consider adding pair of Sonos One SL or Sub Gen 3 or some other configuration (reluctant to add both at this stage)? Thanks all for any feedback.
Tonight I hit the “Party Mode”. I will not get specific but there is a Sonos speaker all over the house. Except in the pool. Next to the pool yes.After saying hello to the neighbours and them something something, TURN IT DOWN!.. I decided to go to my headphones. Exit Sonos app and back to…. another app. I have read all the posts and the people saying that the app is a control centre, not sure for who, NASA or maybe SpaceX > “Starman Man”.. I just need to ask why? If I have Sonos speakers I use your app. If I had another companies speakers why would I open Sonos? Why can I not just use the same app for all of my music? My subscription is not with Sonos. Your blocking of local playback does nothing for your brand. It just makes me ask if I should look at Apple or Amazon. Their sound is not as good of course but sometimes I just want to listed to music. Yesterday via my Sonos speaker. Today via my headphones.
Is there a maximum number of times a single song can be repeated? I have a track which I want to loop and play all night. The track is stored on my device (android).Every night I start thr track and set it to repeat loop, it plays for 4 hours or so and then just stops. Same thing happens if I play the track through sound cloud. Does the Sonos app impose a maximum plays limit?
Thought this was a feagure of s2.
I want to be able to use my Roam as a bluetooth speaker connected to my Mac. I can pair it and everything works fine, except during the periods where I’m not playing music or generating computer audio, the Sonos disconnects from bluetooth and reverts to wifi. Is there any way to stop the roam from automatically disconnecting after periods of inactivity? It’s very annoying.
I am trying to figure out a way to get a Spotify playlist by an artist to show up in the native Sonos app so I don’t have to play it from the Spotify’s app. Absolutely driving me insane. Accidentally did it once but have no idea how I actually did it. I am an Apple Music guy so this is foreign. I have a Spotify free account. Went on the Spotify app and added the playlists to my library. They do not show up anywhere in the Spotify account on my Sonos app. It’s just generic Spotify generated crap. Adding it to Profile does nothing. I can Airplay it to the speakers and then it shows up as Recently Played in Sonos under Spotify. From there I have to add it in as Sonos Favorites and finally have access to it. That is about 4 steps to long. Any way to clean this up would be helpful.
Hello from France,When you put the soundbar at the front, all works well.When you put the soundbar at the back, the L/R audio are inverted.Is there any feature to revert the audio channel for a entire room ?If not, how to ask for a new feature ? This could be useful.Best regards,
I just got my Sonos Arc today and I’m loving it!I was just wondering if my Arc is too far from my TV (20 inches from bottom of TV) as Sonos recommends Atleast 4-6. If so, do you guys recommend wall mounting the Arc? Am I loosing any sound immersiveness? Currently the Arc is sitting below my sitting position so if I wall mount my Arc will it noticeably sound better. For reference my ceiling is 9ft and I'm sitting around 6.5ft away from the ArcAlso should the Arc be placed on the tip of the console like the pic attached or I can push it backward as it will look neater.My main use is for watching movies and TV shows so I would appreciate any setup improvement.
Hi, I’ve got a Beam Gen 2, sub mini & 2 One SL’s as surrounds. They’re working & sounding great. But on the S2 app under the Surround Audio setting page,the Surround Distance categories are not activated and no adjustments can be made. Have I done something wrong in the setup or has this category not activated for some reason.thanks, Mike.
Can 2 Roams be used as rear/surrounds with a Beam?
Hi.I’ve bought Philips TV. OLED806. I have Sonos Arc and Ones.And lip sync wasn’t correct. Adjusting to step 5 (the highest) helped a little. But it seems as it needs at least step 7. Or more.Is it possible to “hack” this setting to allow higher number? :)Thanks.Josef
Hey guys, so I’m a bit of a novice when it comes to this kind of stuff. I’ve searched a few times on here and I’ve been able to ascertain that the ARC can’t play DTS-HD tracks, but this is where I get a little lost.I have a LG CX OLED connected to a Panasonic 4K bluray player with a Sonos Arc + Sub + 2 x ones for surrounds. Trying to play Scream 2 4K which has a DTS-HD 5.1 track. The Sonos app says it is playing Multichannel PCM 7.1 and it sounds pretty awful. Very soft and not at all powerful. Am I doing something wrong ? Or is there a bit of a workaround ? Sorry I do appreciate that this has probably been asked ad nauseam but just feeling a little lost :(
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.