Show off your setup or get inspired by others
Recently active
I have two One Sl for my surround sound system with the arc below my tv. One of them is behind the couch that is on the back wall and the second is between the two couches on the side wall. I was looking to buy a sub and don’t know where is the best placement. I don’t want it under my arc. I was thinking fo put it either behind the couch on the back wall and I would move the one sl to the other outlet where I marked on the picture. Or I would put it when I mark the number 1 in the picture and I would move the One Sl to the outlet I mark. Let me know what you guys think.
Is it possible to create a stereo pair with two Sonos Roam sl via Bluetooth?
Does anybody know what the screw sizes for the official Sonos One stands are? I’ve lost the screw kit that came with the stands. There were two sizes per stand (instructions just list them as ‘black screw’ and ‘silver screw’)I went to Home Depot but couldn’t find any that fit Thank you.
The analog RCA outputs are said to be 24 bits. Is this per channel or is it 12 bits per channel 24bits combined?
Hello,I am looking to purchase a U Turn Orbit Plus with a built in Pre Amp. Will my old Gen 1 Connect:Amp Z100 work with this turntable? Or will I need to get a more updated amp/port/five for this to work?I currently have a collection of (2)Sonos One SL and (2)Play:1 speakers, a Beam, and Boost. So does this work? Turntable w/ PreAmp → Connect:Amp Z100 → Sonos speakers (One and Play:1 or Beam)
I searched and did not see this answered. I have two (2) Sonos Move (and a Sonos Ray, but not consequential for this question). My music service is ITunes. How do I play ITunes to both Sonos Move, simultaneously? I was told you could do this, which is why I invested in a 2nd Move. Seems only SONOS Radio allows simultaneous play?
It appears that Sonos is really suited for home use. I have a bar and I use Sonos and Spotify but customers that have access to my Wifi also have access to my Sonos/Spotify. I have set my speakers to a separate Wifi on the same router and used to the Sonos App to access my Spotify music but even though people have no access to that password they can still get access to my speakers. Is there a professional solution for commercial use to block access for my customers?
When using amazon music prime we cannot see the songs on the queue and hence can’t go forward or back in tracks during playlist playback
I have purchased a Move. If I were to add a second speaker, so that there are two good speakers within one room or I have speakers in different rooms, what speaker would best compliment the Move? Can I have two Moves?
Can use sonos speakers for home theater system with existing wired subwoofer through my receiver?
Hej. jag och min fru delar spotifykonto. När hon har kopplat upp sin telefon mot sonos kan inte jag göra det efteråt, utan att i princip göra en nyinstallation på båda högtalare. Går detta lösa på något smidigt sätt? Båda har iPhone.
I just noticed today whilst playing from music I ripped onto my NAS that I am getting an “HD” icon on the screen. I looked at the Sonos blog and they mention HD music but then say there’s no accepted definition of what that means - sampling rate, bit depth etc. So I wonder what this is telling me or what criteria for showing the HD icon are?This file is FLAC 44.1KHz (There doesn’t seem a straightforward way to get bit depth in Mac OS).NB I tried another file I have and that is m4a and 44.1 KHz and also shows HD
Hello forum, I’m going crazy trying to solve the issues of the Sonos Arc constantly disconnecting from the TV eARC every power cycle and reverting to the internal speakers. Have tried every possible combination, enable, and disable without luck.Auto Power Cycle (ON and OFF) Auto Device Detection (ON and OFF) SIMPLINK (HDMI-CEC; ON) QuickStart+ for LG (ON and OFF) HDMI Ultra Deep Color (Enable and Disable) Instant Game Response (Enable and Disable) All HDMI Cables Tested HDMI cables connected to TV no luck HDMI cables disconnected except Sonos no luck HDMI-CEC setup only for the Sonos ARC eARC enabled I’m running out of options to test, is very disappointing and frustrating that a soundbar of 1000€ + 800€ sub is constantly required to setup every day to enjoy.Have run a diagnostic 303498386.System version 14.19 and LG TV updated to lasted software.(65NANO866)If anyone can help will be much appreciated.
Have a amp and cd player with decks in our dining room at the moment.. but would love a way to hear this in other rooms .. and replace the current alexa speakers .. Is it possible to plug something in to my amp that will let me broadcast to a Sonos speaker? Sorry if this is non technical and clumsily written
Hi,I have a Sonos setup consisting of an Arc, Sub gen 3 + 2x One SL.My hearing in my left ear is less good than that in my right ear. So I would want to turn up to volume of the left surround speaker more compared to the right one.I don't see an option to do that. But maybe there is. Does somebody know?I can't physically move the left speaker closer to me to solve the issue.I tried achieving my goal in 2 ways:Not use Trueplay. Then configure the left surround at the maximum distance in the app (assuming this would cause the volume to be the loudest for it) and turn the setting for the right surround one to be closer. That didn't seem to make much difference, and I would also like to use Trueplay. I also tried using Trueplay, and after doing that turn Trueplay off for a second, and then configure the left + right surround as I did under number 1 above. After that turn Trueplay back on. That also didn't help.What I am looking for is just volume sliders per surround speaker - then I could
Hi everyone,I had multiple Sonos devices throwing error 30 this past week with the update to Sonos v14.9. I tried everything on this forum, including factory resets (about 20 times), unplugging all devices but one working device, plugging devices directly into router with ethernet, even trying to setup a new System in the app.Eventually I discovered the issue was due to using a CleanBrowsing DNS filter on my router. The solution was to go into my DNSFilter router settings, and override each of the affected Sonos devices to a “No Filtering” filter mode.With the DNS filter enabled, the system could see the updates but was unable to apply the update to the Sonos devices. Essentially the devices were bricked. When the filter is bypassed on each Sonos device, they are able to function and update as expected.Hope this helps someone else with similar issue.
I’ve had to turn my Sub (gen2) level down a couple of notches since 18.19. Anyone else hearing this? Was getting deep bass through the floor even on male voices and it was only on +2 which is normally perfect in my room.
I got the list of favorite songs but don't know how to pass the parameters to play the music
Hello, I have a tv that has Arc but no eArc. I am thinking of buying a blu ray player that has an HDMI input only for audio (audio output only).Can I connect an HDMI cable from the blu ray player's audio output to the sonos beam 2 input to play uncompressed Atmos from UHD discs?I understand that the arc output of the tv cannot output audio with high bitrate such as atmos and others. So my only option is to output the audio from the player to the bar, and while it should work, I don't know for sure.Thanks and regards.
Hi there, I’m trying to figure out the best setup for my new home audio set up. I have13 Bestbuy Sonance ceiling speakers (4,5 zones). Most zones have 2 pairs. Some have 3. Sonos arc sb below TV. Will buy the Sonos sub behind the TV 2 of the ceiling speakers are in the tv room but they are front and back of the sofa 4 other ceiling speakers in the same zone in the kitchen open space to the living room Considering if I need the Sonos Ones for the TV All speakers wires, TV HDMI (arc) cables are ran in a media room.what do you guys recommend for the amplifier setup where I cancontrol all zone or each zone with Apple music independently Use the ceiling speakers in the kitchen + living room zone with the arc and sub for the best TV audio experience. Easy to control with Siri, Alexa etcI’m pretty noob in home audio. From my early research, seems like getting a Sonos amp per zone should work for what I want? Can I connect 3 pairs of ceiling speakers into 1 amp? How does the Arc, amp, sub a
I have to pay Sonos 2 app?i want to open it, and send me to cash direction
Hi all, I have a challenge for you…I have a PS5 connecting to the game port on a Samsung Q90 TV and then the Q90 connecting to to a Sonos beam Gen 2 via the E-arc port. I have 2 x Play:1’s serving as surround speakers. I have the ps5 set to output the audio stream as bitstream to the TV. TV is set to “pass-through” on the audio settings. I am trying to play a blu-ray from the PS5 which I can see (from the PS5 screen) is outputting as LPCM 5.1, 48khz. However, when I look at the Sonos app it shows up as Stereo PCM, so it seems to be down mixing. If I put my ear really close to the rear surrounds I can just about hear a faint noise, but it’s not what you would call surround sound. Has anyone come across this? I think the config is okay - if I play a blu-ray from the ps5 using Dolby true-HD 5.1 it plays fine in all it’s surround sound glory and shows up on the sono app as True-HD. I am also getting good surround sound from Amazon Prime, so I think this problem is related to LPCM 5.1 only.
I have Sonos speakers in various rooms of the house. Some are used often and others are not. It seems wasteful to keep them plugged in for days/weeks at a time when they are not heavily used. I am looking at plugging some into smart plugs so I can turn them on remotely when I want them and turn them off when not in use.I plan on leaving the speaker connected to the network on all the time, since that is required.Has anyone tried this? Are there any issues I should be concerned about? Thanks,John
I’d like to know if I could use my 2 IKEA Symfonisk picture frames (as surround speakers) with a sonos Arc.Thank you for your contribution before my Sonos Arc investment
Hello, we are having problems connecting our new SONOS Beam Gen 2 to the Google home network and having the Sonos speaker as an option to connect with Google speakers throughout the house. second issue is when we talk to the Sonos speaker to play music it responses with cannot play because the speaker isn’t available.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.