Spaces & Setups

Well I’ve spent my entire Saturday trying to add a Roam to my system. I was using the S1 app because I have an older Sonos5. I don’t want to upgrade my 5 because it still works beautifully for sound. So I removed the 5 and then opened a new account on the new APP. I tried signing in with my existing account but it didn’t recognize my password which made me think I should leave my old account as is, and I’ll use that as the APP for my 5. I signed out of S1 and tried signing into the new APP. Of course my password didn’t work so I hit the Change Password link and it asked for my email. It said it sent an email to change password. Nothing in email. Try again. Nothing I’m email. I went to the old S1 App and hit the change password link. I got an email with password change link. Change password. Go to the new APP to log in. Doesn’t recognize password. So I go through this about six times and bottom line is, I can’t log in to new APP. I GIVE UP! What a waste of a day and I still can’t get th

so my partner has given me the Pro Ject T1 for my birthday. In my front room i have 2 x Play 1, 2 X Play 3 and a sonos Beam (gen 2. All working seamisly off the app. Looking to add into but all the ways are in to Non Sonos speakers (except the plug in to play 5) so what can i use ? Is it any of them? some thing else?

Just got it from Sonos Online Store last Friday. I am very happy with it, but when repositioning it before running TruePlay, I noticed that while grabbing it, I could hear a somewhat loud creaking noise in the left part of it. Found out that the seam on the bottom of the Arc is not flush but rubbing, causing the creaking.Already arranged an advance replacement with Sonos, but I wonder how common are these kind of issues.One other doubt: does anyone of you used the advance replacement? Is the replacement unit a new, retail unit? Sonos representative said so. Thank you in advance for your input. 

I have a sonos connect. I can either:a: have my flac files on plex and play them through sonosb: use the sonos app on the mini to add those files to my music library and play from there.I've had some issues with b since i think the sampling rate on some of the files is not supported by sonos. However using plex to transcode seems to work for all music files. Is there any issue with going through plex vs. the sonos music library in terms of sound quality?

I have an Arc, two 5's and dual Gen 3 subs hooked to a 77" LG G1 EVO OLED. Any benefit to running these through a Pioneer Elite Reciever or compatible reciever. Can it be done properly?

I’ve been trying to subscribe to Radio HD for about three months without luck. When I select sign up for free trial it kicks me back to a profile page. This happens on different PCs with different browsers. I’ve contacted support and frankly they were worthless. Here is a short video that is occurring:https://www.screencast.com/t/KWc6smknNWBI thought perhaps it was a temporary issue. Sometimes I will get a popup, short 1-2 seconds that states that it is temporarily down. I waited several weeks to see what would happen. Same problem. I thought I would email the CEO on the support page. Of course, that link doesn’t work. This is ridiculous. I have about 20k of Sonos stock that I’m going to dump as soon as I can. I thought this was a buying opportunity for Apple, Wrong. 

Hey Gang! I have a SONOS Arc system currently as my main TV Audio set up:  The ARC is connected via eARC from my 2021 LG G2 77” panel.  For the rear surrounds I have two SONOS Five’s, and a Sub to round out the “Atmos” system.   The two inputs i have for watching content are 1. AppleTV 4K (primary) and 2. a Panasonic DP-UB820 4K disc player (for films I really love and want to have great sound/picture).   I have had no issues with the sound output fro the AppleTV, but with the Panasonic Player, if it’s encoded to 7.1 (using the Arrival - the Amy Adams one - 4K disc as an example), it only outputs to “Stereo PCM.” Looking at the sleeve it’s encoded to 7.1 so I am assuming this might be the issue. The other native audio tracks on the disc are unhelpful since the Dolby 5.1 is ‘descriptive audio’ which I don’t need.  My other discs (Dune, Blade Runner 2049, MCU films) are all out putting correctly.  Wondering if there’s a solve?  Conversely, when i watch Arrival on AppleTV (the version I p

Am I required to return the Playbase I upgraded to Arc or can I remove it from my system and give it to a family member?  Thank you.

Hi, is there a good way to test each of the speakers in the Sonos Arc? Would be great diagnostic feature to add to the app.  I’ve seen some one say put your head close to each speaker whilst playing, however, wondering if there is any other method.  does Sonos have anything that will put a tone through each speaker at a time? 

Hello. I am looking for a way to switch to Bluetooth mode on the Sonia roam from the app. Since I have put the speaker out of normal reach, I would like to have the ability to put the Roam in Bluetooth connection mode through the app.

My sonos one sl arrived with some discoloured marks that don’t wipe off on the speaker grill. I’ll attach pics. Any advice as to what this is and what I can do about it? 

I was wondering if there any way to connect a Sirius XM receiver which is in a Sirius home dock to Sonos speakers without use of the internet.  Would a Bluetooth adapter maybe work for this?

At present I have connected the Move to the Apple TV but cannot control the volume.Therefore, I need to connect the Apple TV remote to the Sonos Move.From other users, I understand I need to open the Sonos app, go to settings > system > select unit (Move) and then Remote Control Setup. However, I don’t see “Remote Control Setup” in the menu.Is this a restriction of the Move, or is there another way to connect to the Apple TV remote?

The sound is great for the space but the IR range on it sucks so bad that I tried putting in an IR repeater with a blaster on the bottom of my TV, but I guess that the top sensor only works if it is mounted vertically. Any thoughts?

Hi, everyone !  I have Sonos Beam and Sub which is S2 compatible and an old Sonos Connect Amp S1 with in-ceiling speakers . Now it seems like there is no method to use Sonos Connect Amp S1 as a surrounds for Beam S2 ? Any help would be greatly appreciated!

Hi.  I see at times my Sonos S2 and S1 apps losing connections to my speakers my new Mac Mini M1.  Is there a date for when a M1 native app will be released?

I have Sonos Arc with two Sonos Fives as surround speakers that’s connected to TV with my Roku box.  When watching tv, voice volume is not ideal as it’s primarily coming from Arc. I know I can adjust the volume in the app but it’s still not the ideal when watching. I end up pumping the volume up and. It becomes too loud.Is there a way to make the voice from TV come out of the 2 Sonos Fives I have?Also, when I play Spotify or Apple Music from the Sonos app, it sounds amazing (full and robust) as it’s coming primarily for my 2 Sonos Fives. How can I make it sound like that when watching TV (from Roku).Can I connect 2 Sonia Ones to this as well? Will it help?  

I just got a Pro-Ject Phono Box DC preamp to go with my Amp + Pioneer PL-50 setup. Plugged in the Phono Box, dropped the needle, Autoplay worked, and it sounded great. No issues there.Annoyingly, after I stopped the the record, Autoplay didn’t turn off. It’s been 40min and the Amp still hasn’t automatically turned it off. I believe I understand that Autoplay is based on a voltage from the record player/preamp which sends a signal to the Amp, so I guess that signal hasn’t stopped, probably because the Phono Box doesn’t have an on/off switch. Is this just the way it is with a phono preamp that stays ‘on’ all the time? Will I have to get a phono preamp with an on/off switch if I want Autoplay to turn off?TV Autoplay isn’t turned on, by the way. Thanks!

So the idea here is to have the turntable with preamp connected to the Receiver. Then have the Sonos Port connected to the receiver as well. I want to run Zone 2 from the AV Receiver to a set of outdoor speakers. I recently purchased a AudioTechnica Turntable with a preamp. I have this setup currently directly to the turntable to run throughout the house on all the Sonos Speakers. Unfortunately I do not want to run Sonos Outdoors due to constant changing weather conditions. I want to install a set of outdoor wired speakers. This is why the AV Receiver is needed. I think I need to connect the Turntable to an input source? Connect the Port to an output Source? and Connect the speakers to the Channel outputs?  I then should be able to listen to music indoors and outdoors at the same time using and second zone for the hardwired speakers outdoors connected to the Receiver? Sorry this is long winded. Looking for confirmation or a correct method of connecting all this. Thanks in advance.Mark

I’d like to use my existing 9.2.6 theater setup for music via the Sonos app. Can I use the PORT “without” an input device connected (tape deck, record player, etc) as access to play music through (existing) receiver (RCA input connections)? TIA Rob  

Hi. This may sound like a daft question but do TV channels broadcast in more than one format?What I mean is before I had the Sonos Arc I had no idea what format I was playing as I had no way of knowing.Then before I had added the Sonos Sub Gen 3, the Sonos app was showing as, say, Stereo PCM and finally now that I have added 2 surround speakers it is showing as Dolby Digital 5.1So surely the same broadcast must be broadcasting audio in multi-formats at any one time? 🤔

I have a Sonos Beam connected to my TV via eArc with two Sonos One surrounds as my home theatre system. In addition, I have two Sonos Ones in my bedroom and one in the kitchen, too. Plus, two HomePods in the mix. If I’m watching a program on my Apple TV and then switch the tv off to listen to music from my iPhone’s Apple Music app thru any speaker in my house, the Apple TV insists on to playing the previous tv show thru all the speakers. The Apple TV actually switches the song out for the TV show.  It takes at least 15 minutes to convince the Apple TV to give up control. Sometimes I just want to through the Apple TV out.  Is there anything I have mis-configured?

I have a Sonia Beam connected to a Samsung TV through the HDMI ARC port.When the beam starts, or when it has been muted for a period, the sound is distorted and crackles for the first few minutes. After a while it returns to normal so it almost seems like it needs to ‘warm up’. Is this normal behaviour?

I may be wrong on this, but I am sure when I looked through my album list in the music library, I got a grid view of the album names and cover art. Now I get a list view. This using the controller app on Android.Is it my imagination that it used to be a grid view? I can’t seem to find any setting option to toggle between grid and list views.On my iPad mini, I still get a grid view of the albums. 

Every phone, computer, Apple TV, and SVS streamer turned off and powered down yet 1SL was playing music. In fact it’s playing a 67 song playlist which was last thing I was playing but with everything off where is the music coming from?