Show off your setup or get inspired by others
Recently active
I am looking to add some rear speakers to my setup. I primarily watch TV and at times listen to music.I am trying to decide between the ERA 300 and the Five. Any recommendations? I have a Sonos ARC
I have a playbar connected to sonos boost and play 1s with sub gen 2 in my living room and a play 3 in my bedroom, I just got a Samsung 77sc95 OLED tv and playbar is showing its age now, I'm wondering if the sub gen 3 is necessary or worth it? Or are they functionally same, Would I still have best quality sound from my sub ? I also have a sonos boost I use I'd rather keep speakers on their own network and not clutter my home. I considered samsung q990c and I use the sub next to my tv wired to the playbar and got no connection issues, But is atmos and all surrounds etc same quality on sub gen 2 as it is on 3?
I have a number of S1 speakers run from a ZP90 base. The ZP90 has now died and I also know that the ZP90 is now discontinued. I need to get a replacement but I’m not sure what the current best option is. Is there a current compatible replacement? I have no desire to upgrade my speakers etc. I just one my S1s to work again... Thanks in advance.
Hi everyone :)i have a question.i have sonos boost, Arc with sub gen3 and i upgrade surrounds to ERA100 . Q is:When wizzard add era100 to my system show connect to my 5ghz wifi. I add second era 100 wizard 5ghz to add speaker to 5ghz wifi. After complete wizard app ask for surround pair. I press ok surround done. I check in router sonos era 100 ip´s. Router show era is connected on 2.4ghz wifi. Why? I add era to 5ghz, 2.4 is differend ssid name with prefix 2.4ghz. Sonos era100 on about my system show:WM:3 ERAarc, boost, sub: WM:0 sonos era not support sonos net. But i see arc use special tunel for wifi and comunication with era ? Or how its work? Arc: sub:era left: era right: Boost:
Please help me with speaker positioning. I currently use Beam Gen 2 and Sub mini with my 43” Sony TV. My wife watches TV series and movies daily. I’m more in music, both streaming and vinyl records, from a vintage Thorens TT connected to basic Yamaha speakers. I would like to emphasise more the music reproduction and keep the HT functions. I added a plant of my room. First option:Should I go separating HT and music reproduction, still keeping in Sonos ecosystem, for example adding a pair of Era 100 or 300 connected to the turntable?In this setup, could the HT part be used to reproduce music at the same time (especially the sub mini)?Will this be beneficial giving the fact they will sits in the same room?Could the Eras be in use also when watching TV? Would it make sense? Would be an issue if the speakers will be placed close to the turntable, so both will be on the left side of the TV? Second option:Add a pair of Era 100 as surround, keeping the music reproduction only from streaming o
Hope you're all doing great! So, I've got this big art gallery, and I'm trying to figure out the best audio setup to echo the sound throughout the entire space. I want visitors to feel the vibe of the art, you know? Any recommendations on which Sonos hardware would work best for creating a sweet echo effect that complements the art installations? I'm a bit lost in the audio world, so any simple advice or tips from your experiences would be super appreciated. Thanks a bunch! Moderator Note: Modified in accordance with the Community Code of Conduct.
I have a rack in my laundry room with sonos amp, and it powers 3rd party speakers outside in my gazebo. When I try to connect the Sub to the system, it is pretty unstable, and even when connected - it plays no sound.However if I bring the Sub indoors closer to the laundry room, it works fine.The internet wifi is very strong all around the house and backyard, so it is not struggling for internet.I also have a range extender/router and internet run to the outside gazebo that powers my TV. When I try connecting the ethernet cable to the Sub - still no luck.How can this be? Is the system not supposed to be completely seamless on wifi? And I imagine plugging in the Ethernet as a backup would work, but no luck!Help!
bnnrrfgg
I’ve had my Sonos for some years now, it would appear that the BOOST is becoming unstable and is cutting off connection for seconds at a time. I believe that I can remove BOOST from the system and connect one of the SONOS speakers direct to my Hub and then have all the Sonos products link to the wired device. Is this a fairly simple process??
I am deciding whether to buy Sonos Sub or Sonos Sub Mini.What are the differences please?
Yes, I know Sub Gen4 won’t be out until 2025. I just want to add my 2c that your Sub frequency range needs to go as low as 20Hz to accurately reproduce the audible frequency range of ~ 20Hz to 20KHz. This is the only issue giving me pause about purchasing a Sub gen 3 (which only goes down to 25Hz); well, that and the static issue reported by many in other threads. Also, the next Sub 4 needs to have a standard low-level in port, so I don’t have to add yet more subs taking up space just because I need sub-in ports. Thank you for your consideration.
i'd like to add a sonos zone to my dock - I have excellent wifi and 110 power, what sonos system , maybe two speakers would best
I’m on recent of software.I would group a bunch of speakers and play music. Then, for no reason at all, it would not play on any except one of the speakers in the group. I have to ungroup and re-add. This started about two weeks go. I do have a TV connected tho the Arc and maybe it is related to playing tv and stop playing passing audio back to the music app. Anyone else with this issue? ---------------------------------Era 100: BedroomSerial Number: XXSonos OS: S2Version: 15.11 (build 76247270)Hardware Version: 1.38.1.10-1.1Series ID: A100IP Address: XXWM: 1---------------------------------Era 100: Dining RoomSerial Number: XXSonos OS: S2Version: 15.11 (build 76247270)Hardware Version: 1.38.1.10-1.1Series ID: A100IP Address: XXWM: 1---------------------------------Era 100: Extra DinningSerial Number: XXSonos OS: S2Version: 15.11 (build 76247270)Hardware Version: 1.38.1.10-1.1Series ID: A100IP Address: XXWM: 1---------------------------------Sonos One SL: Great Room (LS)Serial
Quick question (I double posted this as I added to the original to the wrong forum, so now in Home Theatre). My wall/windows where the Sonos Era 300 speakers will be placed is at an angle (30 degree angle vs the 0 angle couch) so I would have the left rear channel closer to the corner of the couch and the right rear channel further away from the other corner of the couch. So essentially they would be the same height and length distance from the couch/listening spot but one rear speaker would be 3-4 feet behind the other one.Can true play tuning accommodate for this to create the proper surround sound bubble?Link to Floorplan
I have a pair of Play 3 set up as a stereo pair. A few months ago they began to randomly loose connection and the app says it could not find one of them. Nothing has been changed or unplugged from the setup. I go through the reconnect steps on the app and they reconnect. It happens randomly. My son-in-law has a Play 1 and his has started to do the same thing over the past few months. This suggests to me it is a software issue. Can Sonos please sort this issue out! I bought the speakers believing Sonos was a top end speaker system. I currently don’t believe this to be the case.
Hey guys, Current Sonos setup - Arc & Sub Mini. Thinking to get Era 100s by 11/27 (great deal going on) Do you think surrounds add a lot of value? I would have loved to buy Era 300 for Dolby atmos but I feel they are super overkill and having middle drivers disabled when in surrounds, not worth it. Oh yes, an average apartment/condo living room. Thank you Sonos gang!
HiTrying to work out where the issue lies, with my LG oled or the Sonos ARC. Those that have an LG OLED and Sonos ARC and use passthrough / eARC settings on the TV when you play any Dolby digital 5.1 content via a device like the ATV4K does your Sonos app report multichannel pcm 7.1 ? If you have your xbox audio set to uncompressed 5.1 does the sonos app report multichannel pcm 7.1? Those that don’t have an LG OLED does your sonos arc output as multichannel pcm 5.1 for the above configurations? I’m just trying to work out where this issue lies once and for all, so I can report it. Thanks
Just bought arc. Lousy tinnie sound. So, I invested in a 700 dollar Sub. Still sucks. I have a 150 dollar Alexa Speaker that sounds 10 times better. And, yes, I did the true sound and fiddles with the EQ. WTH!Merry Christmas to me!
I have a soundsystem with arc and sub and two era 300, I have tried EQ in every possible way, manually and even several trueplay, but metal music sounds quite dissapointing i this system. It lacks of drum kick power or clarity, drums barely distinguish. It feels like a plastic void sound. I find airpods sound better than a system that cost me thousands euros. Furthermor I have two Hércules monitors and a sonos move that sounds better. Now I can’t return my equipment because I bought few months ago, but experience so far is quite dissapointing. I invited some friends home to help me twitching EQ, but they have same opinion, sound quality is very dissapointing for the price.
I have recently purchased a SONOS amp and I am trying to get it going. I have a large collection of music located on a Windows 10 PC. I have enabled Media Streaming on the pc. The SONOS app see the media server and allows me to browse the collection of music. Most of the files are in FLAC format. A few are MP4 or WMA files. The SONOS plays the MP4 and WMA files fine but it fails on the FLAC files. An obscure error message “An error occurred while adding tracks to the Queue (701)” is briefly displayed on the app screen when I select the track in the app. The FLAC files were generated by ripping CDs in the Windows Media Player. The “Audio Quality->470 940 kbps” option was enabled for the rip. I think that setting turns on automatically when FLAC is selected in the Windows Media Player. I have played these same files through a different product, an Audiocast, using the same configuration without problems. Ant ideas on what’s going wrong? Does anyone know what the 701 error me
Hi everyone!This article will be focusing on Music Services available within the Sonos app - if you have any further questions on this subject, feel free to post a reply, and we’ll update the article What Music Services are available on Sonos? You can find here a full list of Music Services on Sonos - it’s worth noting however that not all music services are available in all regions, you can check where any given service is available to be added to Sonos by clicking the link for that music service.If you should have access to a music service, but it doesn’t show up in the list when adding a music service , then we recommend double checking that you have the correct location set on your Sonos Profile, and then performing a manual check for updates from the Sonos App - this will update the list of available Music Services in the app. What content is available via Music Services? Not all music services offer the same selection of content, and this may even change within the same service
Bonjour,Dans mon salon, j’ai une arc+sub+2 one pour le surround.Je m’aperçois que le sub ne fonctionne plus (il est bien connecté au système salon et couplé, en fonction..., il est bien allumé, l’appli le voit mais il ne fonctionne pas physiquement c-a-d il ne vibre pas).Je pensais qu’il était en panne et je l’ai donc couplet avec ma beam qui est dans une autre pièce et là, il fonctionne.Pouvez-vous m’aider car là je sèche?D’avance, merci.Belle journée.
Hi All,I just installed my Era 300 on the Sonos wall mount upside down option.My question is if there is need to be a gap between the wall mount and the era 300 - please see pictureHow far should the brads be screwed and how much space should be left On the one hand I can tighten the screws more and on the other hand I don't want to do any damage…Any feedback/experience from the community with that case?Raz
This is mendt to be for the people in Sonos development.I think Sonos is doing a pretty good job in all of they capasities. It’s a good specter of product to choose from.But now i’m seaching for a speaker on the small side,and here is what i “wish” for. A speaker who i can use in a bathroom,witch means it need to handle some sort of damp enviroment. It need to be able to use as stereo-pair with a Sub/Sub mini and be able to be used as surround. It need to be smaller than the Play:1/One/One SL’s but bigger than a Roam. I could wish for a angle powercord-connector too. It is something i could mount flush on a wall without drilling whole in my wall…the mount could be using doubleside tape as attachment. It could be wireless/battery power,but this is not mendt to be a portable speaker. This is just to “deal” with a thinner powercord instead of the normal size cords from Sonos….it’s to have the minimum on a bathrooms wall if you understand what i mean. The Move had been great for this,but i
i have samsung tv that connected to beam 2 by HDMI to Earc until yesterday every thing work fine.after the update to 15.8 the beam refuses to connect to the tv. i talk with the support and we tried everything. the only way to get the beam to connect is unplug the power cable and plug it back every time i turn my tv this is the only way. since yesterday that what i do every time i turn my tv.its a nightmare sonos have to fix this issue.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.