Troubleshoot, tune and get the most out of your system
Recently active
I’d like to connect a turntable and a CD player to my Sonos Amp. Is there a way to do this using coaxial or optical outputs converted to the HDMI input on the Sonos Amp, or is an RCA switcher the best option?Thanks!
HiMy current setup is an Era 100 in my bedroom and a Beam 2 in my living room with my LG tv.I live in an apartment building, so my couch is flush against the wall in my 230 sq ft living room.I was planning on upgrading my living room setup during this Black Friday / holiday season for an improves sound..Would you guys say that having a Beam 2 paired with 2xEra 100 speakers as surrounds with wall mounts would significantly improve the listening experience, as opposed to buying an Arc Ultra (after selling the Beam 2)?I am not too fond of the idea of installing wall mounts next to my couch due to aesthetic reasons. I'm also aware that the ideal surround speakers placement would be behind the couch, which is not applicable in my case. I will however prioritize an option that will yield a better listening experience over aesthetics. I know the Arc Ultra is a significant improvement over the Beam 2, I am just not sure how well it can mimic a surround sound experience.Adding a Sub Mini to my
Ik probeer mijn cd speler te koppelen aan mijn era 100.Ik gebruik een HDMI naar USB C kabel, maar mijn era 100 herkent dit niet.…Ik zag op de site dat er korte kabel bij Sonos kan worden aangekocht. Is die kabel noodzakelijk voor herkenning of moet het lukken met mijn eigen kabel?
I got a new Turntable, and I would like to use it with my Sonos System. Can I connect my analog turntable directly to Port or an older Connect2? or do I need a conventional Amplifier in between?
I love the Sonos products… when there all working! I’ve recently moved home and the only one working is the Beam because it’s plugged into the TV! The rest are non existent… Sonos I will be requesting a full refund because it’s so difficult to get them all connected again! Why can’t it be so simple as‘connect to your new wifi’ login to your accountfind your productslink them to your new wifihey presto we’re live!!! No nothing works!!!!!
I recently purchased ERA 300 speakers for home and a full set of ERA 100 speakers for my medical clinic. Worst mistake of my life. The infrastructure is terrible. We can’t seem to get the speakers in the office to sync and have been forced to only use one speaker in the waiting room that we connect to via bluetooth. This morning at home my app forgot I owned our 300 speaker and keeps showing "Sign in as the System Owner" on the front page. When I sign in, it quickly reverts to saying the same thing over and over. When I login online, it allows me to login but doesn’t list my speaker. I just want things to work. I shouldn’t have to call tech support 3 times per week. I shouldn’t have to search online articles or dig through manuals. I’ve equipped my clinic with multiple forms of EHR, wireless scanners, imaging devices (ultrasound, x-ray, body scanner), etc. Equipment that is infinitely more complex and it all works. I regret buying into this ecosystem. If anyone lives nea
Not bothered about album art or anything fancy just wanted my own music library to work 66 thousand songs just to play all over the house when I want it's not good enough to pay out thousands not to be able to do this
After connecting my era 300 to my new Sonos arc ultra and updating firmware and app I have now noticed that surround formats aren’t being rendered properly through the era 300 speakers. During 5.1 content the surround effects are coming from the top speakers only and in 7.1 the surround rear effect speakers do not make sound only side surrounds and top make any sound. Is anyone else noticing this?
I am struggling with unreliable WiFi connectivity from my router to my Sonos app. My WiFi router plays well with my phone, computer and TV but the Sonos app is a sometimes poor link to my Sonos 5 speakers. Would a Sonos Hub improve my situation?
Till yesterday I could choose different Spotify tracks for each Sonos Play:1 via Sonos App and play them at the same time.Now, every time I play a Spotify track all other devices stop playing and only one device can play Spotify. I also observed that I am no longer able to make own playlists in Sonos App with Spotify tracks.Anyone having the same problem and solved it?
I reset Apple Music as I wanted to turn off the library setting of ‘Add Playlist Songs’ and ‘Add Favourite Songs’ because it was dumping partial albums in my library once I had added a single song to a playlist.So I deleted everything in Apple Music and recovered with a function on TuneMyMusic backup/restore.Anyway, what I have are items in my Apple Music Library in Sonos (Desktop and App) which do not exist in Apple Music. I have tried removing and adding the service from Sonos. I have reset the IOS App and reinstalled the desktop App. Nothing seems to update the Albums and the grey items still exist and won’t play. Any suggestions on how to resolve this? Sonos App Sonos DesktopApple Desktop (Windows)
My ongoing disappointment with Sonos continues. The system is virtually unusable - literally every time I switch on my Playbar, Sub, Play:1 Surrounds, I have issues introduced since the previous use. Software ‘updates’ that do nothing but create issues. Not least of which that the Play:1 speakers need to be plugged in to the router to update, because while they work perfectly fine when up and running, software updates invariably fail to recognise them to connect and update wirelessly. Thousands of pounds worth of kit that I cannot be bothered to use any more, because of the hassles experienced at every turn. Such a shame, as the sound quality, when working, is now good.When are Sonos going to sort their software, so that the (fundamentally good) hardware, is not being constantly let-down?
I always use crossfade, but since updating my iOS-app to 80.14.09 yesterday the function seems to have been removed? I am listening to music from Spotify. When I open the MacOS-app the icon is disabled when listening on a Spotify-playlist. When I switched to some Sonos Radio-playlist the icon looks enabled, but it doesn’t seem to work to toggle it. I could still not see the option on my iOS-app.
Any ideas why I cannnot operate sobos system on iphone 16 pro max with ios 18? The app does not find arc, era300, sub. After reinstalling the app and rebooting the sonos system to the default nothing changes. Creating new system helps nothing because the app does not see any the equipment even after unplugging (although in the app it is written it should). Any solution because now I cannot control any of the products ?
For at least the past two weeks, my playlists will no longer play normally.One playlist of 68 tracks sometimes plays a couple of songs and then stops suddenly and without cause. Other times, it doesn't play at all. This I noticed for the first time on Nov 30. I hadn't played that playlist for a long time (possibly before the disaster app release), but it did play normally before. Individual songs sometimes play, sometimes seem to start but fail after a second.Another playlist with a mere 6 songs shows the same behavior, and often refuses to play at all. I use it for alarm (it's called ‘Wake-up songs'), and the Sonos by my bed just sounds wake-up beeps at the appropriate time, doesn't play any of the songs. I've used that same playlist for my alarm for several years now, and up until yesterday, it worked perfectly.The first, longer playlist consists solely of songs in my local music library. The wake-up playlist has 5 local songs and a Spotify song. The Spotify song doesn't do any bette
As of December 12th, I have had issues playing two different tracks (from Spotify) on different groups of speakers. As soon as I start the second stream, the first on will pause.I have noticed that I am also unable to to edit the playlist on these streams. It says that the track was "started from Spotify" and won't allow me to edit. I am solely using the Sonos app to control the music.
Hi Everyone.I have a question regarding apple Spatial music. I have recently changed my setup from Play:5 to Era 300 as surround speaker ( With Arc and Sub).Ive noticed that if I play Apple spatial music most of the sound comes from the arc. The sound from the era 300 is not full (The music playback for surround audio is set to full). This doesn’t happen to other music that is not spatial or other music app such as Spotify. anybody experiencing the same issue? And is there a solution to this other than switching music app?Thanks in advance.best regards,Mus.
My Sonos surround sound sl speakers ain’t producing any sound but my sub mini and gen 2 beam is
Is the Sonos Arc + Gen 3 Subwoofer + Amp & architectural series speakers all combined not a true Dolby Atmos experience? The architectural series add on is not Atmos, yes/no? If not why?? It’s supposed to be the high end combo package
Bonjour, J'ai acheté tout en ensemble Sonos en 2011 près de 2.000€ : des plays3, des Play 5, un Amp... et depuis quelques semaines suite à une mise à jour, j'ai un play 5 (première génération) qui ne se connecte plus du tout. Le support Sonos me fait faire des manipulations pour forcer une nouvelle mise à jour, qui ne fonctionne pas. Bilan : Sonos me propose comme solution de racheter une nouvelle enceinte (550€) avec 30% de réduction si je renvoie mon enceinte soit-disant « cassée », alors que la déconnexion a eu lieu lors d’une mise à jour. Je dis soit-disant cassée car pour rappel, le 21 janvier 2020, Sonos m'envoyait un email pour annoncer que les produits de Génération 1 ne seraient plus maintenus, et proposaient de tout changer, avec 30% de réduction sur du neuf. Une belle proposition d’obsolescence programmée.Le 23 janvier 2020, l'association HOP (Halte à l'Obsolescence Programmée) a envoyé un courrier à Sonos, et Sonos s'est finalement ravisé en décidant de continuer la mainten
Unless I am missing something, the S2 app just fragged my old speakers All speakers working on S1 app, we buy a new speaker “ only compatible with S2” download the app, sign in, poof, all old speakers don’t work. I try on my phone which has the S1 app, poof they are gone, I try to add devices says “ I only can add devices with S2 app” I try to add old speakers with S2 app they are “ only compatible with S1” tech merry go around. call customer service for over a hour get the run around Am I missing something or did the S2 app just disable my old speakers ???
I cannot get my system to work at all with the new app. I have several speakers in two homes and both systems are worthless. Is Sonos doing anything about this?
Suddenly problems with my Sonos speakers. App can’t connect to beam-sub mini- speakers Sonos one.tried all the things I know. Reset router, reset speakers, upgrade app, upgrade system. Put out power plug en restarted all whitout solution.at a moment the app made connection with my beam, and then it was possible to Connect the sub and rear speakers. Next day same again: no connection, can’t find system. what should i do?
I have spent 8 months trying to get access to my iTunes library that I paid for and curated over decades. My speakers have not played music for 8 months and I am close to trashing the whole system. I have emailed and been on the phone to Sonos several times in this time and no one has helped me. No one has checked in to see if it is resolved with each update and I am absolutely distraught. I hate this system, I hate this company and I am totally now traumatised.
Woke up this morning to find my 4 Sonos speakers not working and no content showing in the App. Have tried rebooting all the speakers and my broadband router multiple times, to no effect. Tried logging on and off the App and have deinstalled and reinstalled the App on my iPhone and iPad, all to no avail. Chatted with Sonos on the App and couldn’t send diagnostics to them. Have got to physically call them tomorrow. Any ideas anyone??
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.