Fix & Optimize

Moja aplikacja nie widzi głośników Sonos one,sub mini i move2  Moderator Note - Translation by Google: My app doesn't see Sonos one, sub mini and move2 speakers

Die Höheneinstellung bei der Era 300 ist zu gering .Wann wird es möglich sein mehr Höhen zu generieren ? Die Balance ist auch bei der Era 300 wichtig.Sitzpositionen ausserhalb der Mitte lassen jeden Hörer aufhorchen und die Souveränität von Sonos vermissen. Wann wird es möglich sein die Blance einzustellen ? Moderator edit:Google Translate- The height setting on the Era 300 is too low.When will it be possible to generate more height? Balance is also important with the Era 300.Sitting positions off-center make every listener sit up and take notice and miss the sovereignty of Sonos. When will it be possible to adjust the balance? Moderator edit: Combined two threads/posts

Is anyone else struggling to order? I’ve tried to put four different Sonos products into my shopping basket only to be told that Sonos is out of stock!! Surely they must have some products available???!!!

I own a Samsung TV and stream through my Apple TV. I have connected a Ray to the TV via the optical cord. I have then connected two Sonos ones to the ray within the Sonos app. Audio is playing through the ray, but not the ones. I have ungrouped and regrouped them but it doesn’t help. Any suggestions would be appreciated.

Good afternoon,When I want to adjust the volume of the different rooms, I notice that there is hardly any room at the beginning of the volume slider to listen to music "quietly", I am always at a maximum of 4 but more often around 2 so all the way to the left. The question is whether this can be set differently? 

How do I remove a speaker from app my Sonos account?

Hello everyone, I moved into a new house which has ceiling speakers in most rooms.  I think 8 rooms in total.  I have used Sonos for 18 years so I want to continue to do so.  All of the speakers are cabled back to one server room.  DO I need to purchase an amp for each zone that I want to control?  Or is there a more economical way around this? Also what is the maximum distance from Amp to speaker allowed? Many thanks John 

How do I get the move2 to play what the beam is playing. 

Is there any way to delete some artists from the Smooth Jazz playlist? I am TOTALLY fed up with Chuck Mangione, Al Jarreau and Michael Franks!!! There are so many great smooth Jazz artists out there so there is plenty of talent to take the place of these zero talent artists! Can we please be rid of these sooner than later as I start looking for the razor blades as soon as they start their droning?

I’m still having huge problems with the new app - it is virtually unusable - I spent two hours with Sonos support on the phone last week only for the app to turn into a pile of * the next day.it appears that Sonos only works properly if you unplug your router and mesh system and all of your Sonos equipment and then one by one switch it all on again.  You need to do this on a daily basis!Can anyone help?  *Moderator Note: Modified in accordance with the Community Code of Conduct.* 

Background: 2x SONOS One’s joined as a L/R pair; SONOS Soundbar.Issue: Some time ago now, the SONOS App I was using stopped showing album art. Although not a problem at first, I am now very annoyed by this.  Other apps e.g. VLC will show album art for any and all tracks in my personal library (on my NAS). This is due in no small part to me checking every track I have and ensuring that album art is embedded within the .mp3 or .m4a file.Attempted solutions: 1. Delete/reinstall latest SONOS App on my Android tablet - no difference. 2. Re-link my personal library - App says it’s already synced, no difference. 3. Create a new playlist on the NAS - App sees and plays it, but still no album art. 4. For info, playlists that I have deleted on my PC, still show up in the App as imported playlists. (??? Why ???)If someone could provide an idiots guide to get my system working again, with album art, I would be very grateful.  If this involves factory resets on my kit, I am prepared to do that.Than

I am looking to create a Cinema Room in my home. I was planning on using an ARC Soundbar, a Sub Gen III, two Sonos in-wall speakers at the front and two Sonos in ceiling speakers at the back. Would all these components be compatible? If so would I need two Amps? And how should I configure them?

Have just bought a new Beam Mk 2 to pair with 2023 LG OLED 42" TV. Works fine but cannot get Atmos.Have followed various tips (see below) but Sonos app does not show Atmos in 'now playing' or 'system/about'. Using HDMI-2 (eARC) on TV to link to Beam using Sonos-supplied HDMI cable HDMI Input Audio Format - Bitstream (on all HDMI outputs) Digital Sound Output - Passthrough eARC Support: On Content - tried 'The Tomorrow War' via Amazon Prime among others which should be in Atmos Source - have tried built-in LG app (Prime) and Fire TV Stick 4K Max (Atmos-capable) - no difference. TV settings show Atmos enabled (but greyed out) but I think that only refers to TV speakers (I've selected HDMI-2 output on the TV sound settings).I've just ordered a different HDMI cable on Amazon to see if that's the issue though I'd have hoped the Sonos-supplied one would be ok.Sonos app and Beam 2 have both been updated to latest software.Any help greatly appreciated!

About a week ago, I was leaving for a trip and was charging my Roam 2 to take it. I noticed while using the app that it was actually loosing charge not charging. I was using a wall charger that is PD20W that I bought specifically to charge it. Since then it has completely lost charge and won’t turn on. The app doesn’t recognize it so I can’t check to see the battery level. This is really badly designed. Fist of, why do I need to have it connected to a specific wifi for the app to be able to see it? This is so dumb… also, why is there no way to see the battery level on the actual device or even in the app without using the wifi thing so I can see if it’s actually charging or not.I’ve only used it like 5 times and it seems this is a common issue sinece the Sonos Roam 1 and it still hasn’t been fixed. Why?Also, for the cost of the Sonos Roam 2 you could’ve included the wall charger. This is the worst experience I’ve had with a bluetooth speaker!Is there a way to make it charge and turn on

I just upgraded my original connect system to a new port, however I can’t seem to connect it to my existing Sonos 1 speaker. The new system works on my hifi but cannot find the existing Sonos speaker. The speaker does show when using my laptop but the new port doesn't. Can anyone help?

I am having difficulty connecting my Sono Ace to my Sonos Ray for the TV Swap feature. While it says I am “Connected” after following the steps, I cannot connect TV sound to the Ace. I called the tech support four separate times today, checked and have all the latest updates, and factory reset my headphones with no luck. Any ideas (I am about to give up. Great looking and fantastic Bluetooth sound, but without the convienent TV Swap feature at the price, I’d rather go with the Apple headphones

I am having a really annoying issue where my Spotify Release Radar playlist is not updating properly on Sonos, but is instead playing last week’s songs. For context, the Release Radar playlist is updated every week by Spotify. I have tried playing it through Spotify directly and choosing Sonos as the speaker, but infuriatingly Sonos changes the queue in Spotify to the old playlist! I have tried disconnecting and reconnecting Spotify to my Sonos account and no luck there either, it reverts back to last week’s playlist. How do I force an update? How can I stop Sonos from rewriting my queued songs on Spotify?

My Arc and Sub Gen3 were working fine when both were connected via Ethernet. I recently rebuilt my home network and improved the Wi-Fi coverage, so I disconnected both speakers from Ethernet and changed their networks to my Wi-Fi. Since then, no combination of network settings changes, reboots, and factory resets will get my Sub to play any audio. I’ve connected the Arc to 2.4GHz Wi-Fi and Ethernet, and the Sub to 2.4GHz Wi-Fi, 5GHz Wi-Fi, and Ethernet. I’ve rebooted both speakers multiple times and factory reset both speakers. What else can I do here?

Since the latest update of the app I get auto logged out a couple of times a week!It’s so annoying! I use my roam to wake up so I usually have to set it on different times each night. And now when I’m tired as * I have to start logging in again. And I you don’t even save my details so I have to put the whole email and password in each freaking time!Also you hid the wake-up function pretty well in the update. It’s not very user friendly anymore!So my question is just WHY?!?!? *Moderator Note: Modified in accordance with the Community Code of Conduct.*

I have been doing my research on a soundbar for the master bedroom and I ave decided on the Sonos Beam (Gen 2), my first Sonos product.In the master bedroom our setup consists of a 60” LG TV plus an Apple Box 4K. The Apple box is connected directly to the HDMI Arc, but I am not sure if the TV supports eArc.  When I get the Sonos Beam (Gen 2) which HDMI do I connect the soundbar to?I would greatly appreciate any help you can provide.Thank you all

Hi there, I have been having an issue with a play one which I got given from my dad along with another (which works fine just now) and the one I am having bother with was working perfectly fine for a while and now seems to not want to connect to my Sonos app after I just purchased a Sonos ray so looking to get the 2 play 1’s setup for movies etc.  the play one I am having issues with is showing up on my Sonos app and when I go to connect I get by the connecting to the Sonos wifi but soon as I get to the chime it just does not want to do it. I have tried doing a factory reset and does not change from orange to green! Bit of a pain and have done it even with Ethernet cable connected and unfortunately still the same result. Thought I would ask in here as a last ditch effort before I go and buy another. If anyone else has had the same issue or has found a fix it would be greatly appreciated to share. 

I have jumped through all the steps and cant get Alexa app on Sonos Move to simply play music. It tells me I need to enable that skill on my device in the Alexa app which i have already done 10 times……..please help before I Launch my speaker out the window

I’m trying to add to play speakers to my system that currently has a sound bar and bass.  I have reset the play speakers to factory.  when the app starts setting up the play 1 speakers to add to the system, I get this inane message:  One or more apps on your mobile device are using airplay.  Go to the app and change the audio output to your device.  If anyone can unwind that word salad nonsensical message for me, I will be very grateful.  What app?  Change what audio output to what device?  

I just added a Ray Sounbar to a bar room that already has 2 ERA100s and a Sub Mini. Purpose is to improve TV sound and be able to leverage the other speakers for that when not playing music.  I wall mounted the Ray directly below a TV and realized I mounted is it upside down - with the touch controls on the bottom. This is ideal since the touch controls would be difficult to use if mounted on top.  Is there any issue with the soundbar being mounted inverted?

Hi, It’s been 4 months that I am facing this problem.  When I factory reset my ARC and SUB and connect to the new wifi through the SONOS app, the app says the devices are connected. But I do not see the devices on my app. See the snapshots.I have reached out to support and they told me to do a hard wire connection to the router. I did that too and still nothing.Because of this, I am not able to tune the devices to my new home set up. This is really frustrating. Any help?