Fix & Optimize

Recently i upgraded my soundbar form a cheap generic to a beam 2 to use with my existing Era 300’s as surrounds.Initial set up seemed to go ok enjoyed a week of decent sound from my TV.Yesterday, my TV suddenly reset and I lost sound. When it started to work again, SONOS defaulted to playing music form spotify rather then the TV output. The only way i can get TV as default is to remove the surrounds from the set up (making them a different system). I now have only the beam connected to the TV, this isn’t ideal as i brought this to work alongside the Era 300’s.Sorry if this is rambling.SystemAmazon Fire series 4 TVSKY QBeam 2Era 300(pair)

Every few weeks my Sonos move needs a factory reset for it to work. It’s very annoying having to wait to reset it every time I want to use it. It stays on the charger when I’m not using it

Can I turn off the voice enabled feature?

Can anyone show a single example of a Sonos working with a Samsung TV (eARC)?So disappointing these ‘premium’ products have basic compatibility issues...

Hello,I cannot get these speakers on the same network so that I can play the same music on both.

I’m trying to connect two Sonos One speakers that have been shelved for a couple of years. The app doesn’t find them. How do I reconnect?

BonjourJ’ai besoin de votre aide pour connecter mon vidéoprojecteur JMGO Ultimate 4K ayant un port HDMI eARC et la sonos Arc Ultra (qui possède aussi un port eARC). J’utilise un câble HDMI de bonne facture compatible 8K. Mais lorsque je branche les 2 appareils, l’image du vidéoprojecteur disparait pour faire place à des formes géométriques diverses et variées. C’est comme si le JMGO ne comprenait pas que son port ARC doit s’utiliser comme sortie et non pas comme entrée. Ca fait la même chose sur la 2° port HDMI du JMGO qui n’est pas ARC.Une idée pour faire fonctionner les 2 système correctement.PS: la connexion bluetooth fonctionne bien, mais j’aimerais passer par le HDMI ARC pour avoir les dolby atmos.Merci d’avance

Hi. Just bought the line in adaptor from Sonos and connected to my audio technica AT-LP3XBT. Sound playing straightaway but the sound is dropping in and out from the right speaker (the one not connected with line in).    Stereo pair set up and plays fine with Bluetooth from turntable.   Any idea what could be causing this please ?  thanks

Just left CenturyLink for Spectrum. This fixed the business related issues I was having with upload speed and video conferencing but wrecked my Sonos system’s functionality. I’ve had a perfectly working system supporting 10 different Sonos products throughout my house on CenturyLink for years, bragged about how amazing Sonos was, etc., but now, it’s all just a memory. About half of my Sonos products are constantly dropped from the app, nothing is reliable to the point I have just given up. That effortless quality is gone. I’ve talked with Spectrum support, tried their recommendations but to no avail. From research, seems like a mesh router, in particular eero 6+, may be the answer. Has anyone else had a similar experience and this was the fix?

Hi,I currently have the Sonos Arc Ultra, Sub Mini, and 2 x One.I’m planning to replace the 2 x One with 2 x Era 100.Is it enough to just remove the current surrounds and add the new ones in the app?Or is it better to re-pair the Arc + Sub + Era 100 from scratch? I’m wondering if anything from the previous sound profile might still be linked.Thanks!

Har köpt ett paket med utomhushögtalare och då ingick en AMP. Vad fyller AMP.en för funktion? Jag är inte så teknisk och trodde att jag bara skulle kunna sätta upp utomhushögtalarna och koppla upp dom i mitt befintliga SONOS system men det känns som om det är lite krångligare än så. Någon som vet hur man gör?  Moderator Note: Translation by Google Translate - I bought a package of outdoor speakers and it included an AMP. What does the AMP do? I'm not very technical and thought I could just set up the outdoor speakers and connect them to my existing SONOS system but it seems like it's a bit more complicated than that. Does anyone know how to do it?

I have an existing Port to several speakers, works as expected.  I attempted to add a Sonos Amp and a few speakers to play different music in different rooms.  However, when Amp is turned on, constantly makes a clicking noise (sounds like the audible text message typing).  It also constantly fluctuates the volume up and down, as wells as auto groups with my Port. I’m new to Sonos and this may not be doable. Please help.

I recently purchased and have been using a SONOS ERA100, and I have discovered a reproducible issue. I am not sure whether this problem is specific to my device, so I would like to inquire.Product:SONOS ERA100Issue:When using AirPlay from an iPhone running iOS 26.4.1 with the default Music app, if I add a song to the queue using “Play Next,” the next track starts from about 30 seconds into the song.This issue occurs consistently when “Play Next” is used while the currently playing track has about one minute remaining.For tracks that start midway, the playback position becomes inconsistent with what is shown on the iPhone screen. In other words, the screen appears as if the track is playing from the beginning.The same issue occurs on another iPhone in my household running iOS 26.4.1. However, an older iPod running iOS 15 plays without any problems.

My old pixelbook had limited function on S1 app, but my new Chromebook doesn’t seem to support any of the SONOS S1 app options, and the webpage controller notifies I need a firmware upgrade (which I am afraid to do since 9 speakers are older S1 system models) Hoping to find a way to control my S1 Sonos system from my Asus Expert book (Chromebook Op Sys)

I have a Ray together with a sub connected to my Sonos system and it is also connected to my TV. On one of my devices the small circle does not show up so controlling volume is not possible, however on another device it works. Have tried to restart the app in the phone but did not help

I’m playing “top songs” from an artist I like, after searching for the artist on the system, through all my Sonos speakers. Firstly, it plays a few songs from across the artists catalogue then it plays random songs from different artists.Secondly, when I go to skip the track I get a message saying it can’t skip and to try again. See picture of message.  Any suggestions? 👍🏼 

Why are there still so many radio stations on both TuneIn and My tuner that I cannot play?I am getting really bored with it. 

Hi everyone,My Sonos Beam (Gen 2) suddenly stopped working while I was listening to music through the Sonos app. Since then:• The Sonos app no longer shows any installed devices or system setup• The Beam displays no LED indicators whatsoever — not even a faint light on power-up• I have tried plugging it into a different power outlet• I have tried a different power cable• I have attempted a factory reset, but the unit shows no response at allThe speaker appears to be completely unresponsive, as if it has no power — yet the outlets and cables I tested are working fine with other devices.Has anyone experienced this before? Could this be a hardware failure, or is there something else I can try before contacting Sonos support?Any help would be greatly appreciated. Thank you!

I just bought 6 era 100sl.I'm getting crazy to connect them . They disappeared or never end the actualization . I'm using an open WiFi from the hotel .We want to use it combining music in differents areas . Can anybody help me please ? Thanks 

I have two SONOS devices. I’ve sold one of them. How can I transfer the sold SONOS device from my account to the buyer? I saw the option in the mobile app, but I’m worried it might transfer all my devices. Can you help me?

Factory reset instructions say to unplug the power cord and hold a certain button down while plugging it back in.Can we not just turn the speaker or whatever off at the wall socket and turn it back on while holding the button instead of actually unplugging the power cord. Wouldn't that do the exact same thing and be so much easier i mean if we can then why dont Sonos just say to turn the speaker off at the wall then turn it back on while holding the button down? seems extremely overkill to me to tell us to pull the power cable out. Some peoples cables are hard to get to.Out of curiosity i did actually test it and it seemed to work fine but i dunno just seems like they really overcomplicated the reset procedure and I cant think of a reason why they would do that. Which leads me to think unplugging the cable is actually important and my reset may not of actually wiped everything    

i looked online, but can anyone suggest the crossover frequency in the sonos amp with a sub when the architctural speakers are detected? the default is 80 but those speakers appear to go below 50. 

The app seems to be getting progressively worse. I’ve now got the following issues. Alarm didn’t go off today Tried and failed to play music to the relevant speaker  if trying to interact with app, I need to close and restart as many as 4 times before it properly loads Can’t play music to several speakers  Almost impossible to play everywhere - always fails  My WiFi is good around the house is there an update coming any time soon to fix all of this? Terrible experience for a system so dependent on the app, especially if you have lots of devices.  Graeme 

Is sonos move 2 charging base station compatible for sonos move 1 too?

I have bought 2 x Era 100s to connect to my Beam1 to use not as surround sounds but as additional speakers. The Era play but I can not get the Beam tomplay as the group or injunction with the Eras? nothing Support AI suggests works?