Fix & Optimize

Hi, I am experiencing problems getting sound from my Era 100 when connected via bluetooth. The mobile confirms the connection and the Era 100 comes with an audio signal that confirms the connection, but still no sound from the system. Tried connecting via PC and mobile phone, no sound. Any ideas?Tor-Erik

Tried to reboot Sub. Can’t connect when asked to press. Tried LAN still no good. Then went on to pair x2 play 3 and couldn’t connect. Then parts of App stopped working. What’s going on?I am surprised my playbar is working as nothing else is.😔

I use the Sonos alarm feature daily and love it.  Recently I noticed a notification showing up on my iPhone for an alarm that I do not have either in the Sonos app on my phone or via the PC application.  Interestingly no alarm is triggered at the time this alarm is set for.  I just get the notification.  How do locate this alarm and cancel it?   

Hi.Can i use a sub gen 3 with sonos beam gen 1 and two play one gen 1?

Sonos not connecting to my 9 years old samsung TV, It has arc hdmi port as well. I have latest sonos app installed in the iphone. I have changed HDMI cables but no change. Is it possible my 9 years old TV is not compitable? 

Hi,I currently have a fairly comprehensive Sonos-based sound system in my apartment with about 6 different speakered rooms. In my living room alongside my Sonos arc and surround Ones, I have an old Zenith record player console. I use it to play old records and occasionally listen to the radio. I believe its possible to wire the console into my Sonos system in such a way that I can play my records throughout the house and use the console as a speaker for spotify streams etc. by using the “Tape” output setting and connecting RCA cables to the sockets on the back of the player, but I’m looking for some guidance on doing this in case there are any drawbacks or potential pitfalls. There is also another “external speaker” output on the back which I’m not sure about. I don’t currently own a Sonos Amp or Port (I’m not sure which I’d need) so I’d want to make sure it would work before I tried one. Alternatively if there was a way to do this that didn’t cost $700 that would be great too. Below a

I have 2 speakers: a Roam 2 and a Roam SL.I successfully added both of them, only to notice that they were set up as 2 different systems. I factory reset my Roam SL, but when trying to add my Roam SL to the same system as my Roam 2, it tells me that I need to update the app, and when I click on the “Update Sonos App” button, it brings me to my browser to a page to update the Beta Controller App.I was a beta tester for the Roam 2 speaker, but I changed phone since then (from Galaxy S22 to a Pixel 9) in case it’s relevant.Could uninstalling the app, and re-install it fix the problem?

I have a Samsung Serif with audio being output via HDMI eARC to a mic mixer. The mixer can take HDMI input and can output HDMI or optical. The SONOS Ray only takes optical input so my current attempt at a karaoke setup is Serif → Mic Mixer via HDMI eARC → SONOS Ray via optical output. This isn’t working and I’m not sure why. This setup worked perfectly with my $70 Onn soundbar.

Directv over internet LG smart tv Genie receiver and remote Alexa and Echo Playbar and one OneSLThese were all installed separately over a period of years.  All software current…no observable or reported hardware problemsLast piece of kit was the Genie remote. After install, it worked just fine...I could adjust the volume of the speakers in the app or by using the volume button on the remote. Then...it just stopped.  Could not adjust the volume with either the remote or the app.  Have had to go back to the tv internal speakers, and that ain’t no fun when you’re watching Apocalypse Now. I have tried everything I can think of...uninstall and reinstall everything and unplug and plug back.  No Love. Any thoughts...anyone? Paul

I always upgrade to the newest app the day it comes out but I already had the current one at that time which was the one before 80.17.09 and 80.17.07, and it did a system update to my new Arc Ultra.  The rear speaker balance sounded fine after I ran a full TruePlay on my system with two Era 300 rears and two Sub (Gen 3)s.(But why with the Arc Ultra is the option not allowed, greyed out, to adjust distance between surrounds which I never had different before anyway but previously I had it on 2ft to 10ft, and now it is greyed out on more than 10ft, or not allowed to change the phase of my subs, which should be independent by the way — as should volume, balance, bass, treble, and height controls be SEPARATE for Arc Ultra/Subs and SEPARATE for the Era 300 surrounds?)But once I did the system update to my hardware in 80.17.07 came the problem of the left era 300 being 10x louder than the right era 300 surround speaker!!!!  This is worse with TV Video than with music, as with music the left

I’ve got a Roam and a play 3. They group and work perfectly unless I add Alexa to the Roam. That stops them being able to be grouped. Removing Alexa means they can group again. Is this a thing anyone else has happen? Is there a solution so I can use Alexa? Thanks. ☺️

I have in my Sonos system 1 Sonos Roam, 3 Sonos Play 1, 2 Sonos One Black e 1 Sonos One white. I'm having a problem updating my Sonos One Black (error30). I tried contact by chat and we tried everything (ethernet cable, turning off the router, etc..). We did a factory reset and now I can't add them in my system. It's a firmware problem. I'm from Brazil and I can't complete this call Anyone else having this problem? 

I have a Sonos Arc hooked up to my TV, when I'm playing music and turn the TV on it keeps playing music. The company who installed it used an optical to connect the two and the HDMI for a distributed video system. Is there a way to fix this without having to switch from Optical to HDMI?Thanks for the help.

Hi everyone,I have the Sonos amp and 4 Sonos ceiling speakers in our kitchen. The same amp also runs the Sonos sound bar and 2 One SL speakers in the living room.Every so often when I play playlists through the amp from my Amazon Music the songs stop suddenly after the first 15/20 seconds and move on to another song. At first I thought it was a preview of each song that I needed to turn off in the settings but then I realized that isn't the case. Is extremely frustrating having spent so much money on what you would assume is a quality system for it to be intermittent and ultimately so frustrating I turn it off.Another issue I have is sometimes my two one SL speakers cut out so I lose surround sound half way through a film and then they suddenly start working again off why I opened the app to see what's wrong.Just for context everything is quite close to each other and I have really good full fibre internet speeds and a good WiFi service within the house. Can someone please give me some

Hello teams,I’m wondering to buy 2 ERA 100 for my home.I actually have a Yamaha YAS-207 soundbar (with a Yamaha Subwoofer) connected to my Samsung Smart TV via optical cable.The TV have a wifi connection to my internet box.My questions are: Is it possible to add the 2 Era 100 to this installation in order to simulate a 5.1 Home cinema ?If not (in this case I will sell my yamaha soundbar) , can I use the 2 ERA on my TV in Wi-FI ? Other connection ?Thanks in advance

I have inadvertently duplicated the name of the same device on my system. How do I remove one name?

In a house with 5 amps, one zone plays music on its own randomly.Why?

I have a Sonos Beam that I am trying to get working with GA. Have followed all the instructions added GA within the Sonos app. Gone into GA and checked names, set default speaker etc.Beam/GA recognise voice commands as it comes back and tells what it is going to do. Then it comes back and says it looks like Sonos isn’t available. Doesn’t mentioned the name of the speaker I have told it to play through. Have tried renaming the room and speakers within Sonos App and GA. Always the same Sonos not available.At the moment I only have Sonos speakers in one room. A Beam and two One SLs. So wouldn’t have thought much scope for confusion as to where it was supposed to be playing.any suggestions. Family is so used to using GA to stream audio in other devices I would like this to work.

How do I adjust the output balance between my main Arc soundbar and my 2 surround sound speakers? The predominant sound is emitting from the sound bar and I want to increase the bias to the back of my room.

Hi,I tried troubleshooting this with Sonos Customer Support to no avail. I’m trying to trueplay tune my home theatre setup which consists of a Beam Gen 2, sub mini and 2 play 1s for surround. It fails every time midway through the test and asks for me to try again. Help! 

Despite many attempts I have been unsuccessful in trying to play the sound from my Soundbar to other speakers in other rooms.I have gone into the Groups option, set up a group name then in my speaker list select Playbar and other speaker in other rooms. I have saved this setting hoping I would now be able to hear Playbar sound in the other speakers, but nothing!What can I be doing wrong?Thanks.

Arc speaker connected to the TV has just gone crazy. Middleton of a program it just starting sounding like some sort of nuclear alert siren. Unbelievably loud single tone siren. Had to disconnect the speaker, only way to stop the sound. any advise appreciated. Hope the speaker isn’t bricked. Wouldn’t be the first. 

Grateful for anyone who can help please - I've been tearing my hair out!  I’m unable to properly connect my 2 OneSLs to the new Wi-Fi network after we upgraded the router. Surprisingly the two old Play:3s and a more recent Move work fine and are happily connected.  The router is a Vodafone Ultra Hub with extender which offers 2.4, 5 and 6Ghz on different networks, recognising that older devices may not be able to connect to 6Ghz. the OneSLs are instantly recognised when connected by Ethernet but disappear when using Wi-Fi. They can be found by factory resetting on Wi-Fi but then disappear again at the end of the “add new speaker” process (this finishes with the statement: “your product has been added, but may not appear in your system  unplug it, plug it back in, to finish setup from settings”  and of course when you do that it can't be found again!)restarting the router doesn't help  turning off the extender doesn't helpseparating the different networks doesn't helpconnecting via Ethe

I am not Tec Savvy at all. Husband is and has set up Sonos system , had for 7 years, we have Sonos One, speakers in most rooms and a sound bar on TV. Having missed the vinyl experience , I am now looking for a good quality , classy turntable to link easily to my existing Sonos set up, to be able to enjoy my vinyl that I thankfully kept for 30 years. My husband bought a Pro _Ject 1 turntable , with minimal research. He realized we needed other stuff to get it to work but then we could not get it to connect to the Sonos system. Frustrating , so all packaged up, not used and sent back, awaiting refund from Poland. I have had a look on some of the threads and there are recommendations for Viola Stream Carbon and Onyx.  Is it easy to set up? Will it work with Sonos One ? Is it available to buy in the UK? I am no expert at sound quality, but know I don’t like a tinny sound, hence the depth of quality with the Sonos system. I am looking for a mid range, not high end sound, best value for mone

Sonos not connecting to Apple TV, was working only weeks agoI airplay my projectors sound to two Sonos Ones. And they worked well only a few weeks ago. It was simply a matter of selecting the Sonos system from the audio menu and it would connect. Now I’ve tried factory resetting and reconnecting the speakers and they still won’t play through Apple TV. I’m stuck and not sure what else to try?Could it be the latest version of the app? I’ve read a few others complaining of different problems but blaming it on the app. Anyone with a similar problem? Or any ideas of what else I might need to try to get them working again.