Spaces & Setups

I have a sub, a beam, a five, and a sonos turntable. I want to connect a traditional CD deck. Do I need to buy a Sonos Amp or a Sonos Port? Thanks

Hi guys! Sonos 2 version 14.0 is out. Changelog claims “bug fixes”. Is there a list somewhere what bugs that has been fixed? Would be nice to get some more details here before updating.

Hi. Anyone have popsical remix 2 set up with your Sonos arc? Do your mic have delay like mine? How do you connect the system? thank you 

Hi community! I’m a long time Sonos owner (I have about 12 Play:1’s) just ordered a couple SL’s, had a Play:5 Gen1 pass through my hands and ordered a Gen1 Beam (used).  I’m a little bit of an enthusiast, having gifted a couple play:1 to my parents, the play:5 Gen 1, etc. I’m here to say hi, but to ask something:  In a large space, what do any of you feel is optimal arrangement of Play:1’s or Ones? The reason I ask this is that I have an open loft apartment. I have stereo pairs around in the kitchen, office, living room, but recently discovered that adding a single unpaired between the stereo pair added some kind of something that I liked a bit. It got me to thinking: Would I want to put all of my “left channels” to one side of the apartment and right channels to the right side? I wonder if there is any possibility that the Tuning feature could be enhanced to apply to pairs of speakers in a room to optimize the entire room into a single 360 experience of sorts? Has anyone done their ow

I’m expecting my LG Gallery OLED next week. I’ll be mounting it on the wall, as well as my Sonos Arc under it on the wall.If you’re familiar with the Gallery line of TVs, they have a custom wall bracket as well as channels to run the cables behind the TV that allow it to be mounted flush against the wall, so that it literally has a depth of 1 inch or so, looking like a painting on the wall. Similar to the Samsung Frame.I know Sonos recommends that the Arc be mounted 5.5 inches or more below a TV so the sound from the upward firing speakers is not impeded.  However, I’d like to mount mine more like 3-4 inches below the TV.I can’t imagine that a TV with 1 inch depth could block the upward firing speakers right?Seems like I should be fine.  Agreed?Thanks for any opinions.

I'm considering music services and Qobuz popped up. I primarily listen to 60s to 90s pop, with a bit of alternative tossed in. Questions: 1. How extensive is the pop and alternative selections?2. How compatible is the Quboz app with Sonos systems?3. Can Quboz music be downloaded to a phone for offline listening in a car?4. Is the Qobuz app or the Sonos app used to control music on the Sonos speakers?5. Are voice commands available with Quboz and Sonos?6. Overall, what's your opinion of the service?

When using the app on iPhone & iPad I’m having real trouble when scrolling - up or down, left or right - where the window keeps skipping back to where it started. Very frustrating especially when searching. Common problem with an easy fix or is it something more sinister?

Looking for a way to play podcasts from Acast through Sonos

I wounder if this configuration could work for a simple karaoke system.TV hdm arc => karoke mixer with hdmi arc in and out (mixer will mix the audio from the tv with audio from mic and send it to the arc)  => sonos archttps://www.amazon.de/-/en/gp/product/B08R768H7M/ref=sw_img_1?smid=A3JTW74NYUO5NP&psc=1 Will this work?    

Hi,I am moving into an apartment with limited possibility to place Rear speakers for 3.1 setup.Does it make  placing Sonos One in this setting - having both in the rear, but one properly placed on the right and the other one in the middle?I cannot place the left one in upper corner of the room as there will be a heavy curtain in that spot.Cheers,m  

Will Sonos One work the Sonos Arc far as surrond sound?

I know this had been discussed in prior posts, however, I’ll broach the subject again - are there any reasonably priced options for a sub that can be leveraged within the Sonos ecosystem other than the Sonos Gen 3 sub?  Also, has there be any further discussion on offering a more entry level sub from Sonos?  $750 for a sub has got to prices a lot of customers out of the market, including myself.  

Hi all, My setup consists of two Symfonisk speakers, stereo paired, and a Sonos Port. The Port has a line in from a Behringer sound card. The card is fed by a Raspberry PI and also has an analog line-in signal from the TV.I have set the Port to Autoplay line-in. When I start a film on Netflix (Chromecast connected to TV), the port is activated and sound comes up within two seconds through the Symfonisk speakers, which is good enough.However, if there’s a silent passage in the film, sound gets deactivated and it may take 5 seconds to activate again when signal is detected. Looks like Autoplay gets interrupted after a couple of seconds with no sound. Is there a way to prevent this from happening, other than manually switching input via the Sonos app?

Just an opinion but I find it odd that Sonos does not use its full number updates for major capabilities and enhancements. Not a complaint just weird to me. Hoping for abig update such as its own voice control but maybe soon. 

I have a Bose Lifestyle 35 with outdoor speakers and I would like to replace it with a Sonos system.  I understand that Sonos doesn’t have bundles and has mix and match, but I was wondering if anyone has any suggestions.  It looks like the Arc soundbar is what I will be getting, but other than that I haven’t the foggiest of what else.  I’ll have the home theater in one room which I would surround sound, while in another room I would like speakers for music as well as outdoor speakers for music.  My current outdoor speaker wires are not very good and would either replace them or have wireless outdoor speakers.  I’d like to be able to play music via Alexa and Apple Music.

I have a Sonos Port hooked up to my Denon S710W AVR via both analog and digital (co-ax) connections.  I used the included cables that came with the Port to hook up the analog feed and a new shielded coax cable from Amazon Basics  to hook up the digital feed.  I’ve tested both variable and fixed line out settings and issues sound occurs in both setups.Heres the problem. The sound out of the digital connection is much harsher and more nasal sounding than the analog connection.  This is true whether the output is set to variable or fixed and true even when the receiver “Pure” mode (direct two channel mode, minimal processing).  The analog feed sounds softer and more appealing with a bit wider stereo soundfield.  When I switch on Dolby Digital surround (which is the way I like to listen when Im moving around doing things) things really get uglty on the digital side.  It sounds echo-ey and harsh in a way that the analog feed run through the same DD processing does not.  I made sure that any

I just added a Sonos Move to my Sonos home Wi-Fi system. I took the speaker away from my home, connected an iPhone to it via Bluetooth and performed a Zoom meeting. I wasn’t able to control the volume of the speaker via the side buttons so I tried to connect to it via the Sonos application for iOS. However, the application displayed a “WiFi isn’t connected” error. Is there a way to manage a Sonos Move via the Sonos application when it is connected via Bluetooth and a cellular data connection? Otherwise how can this issue of controlling the volume be resolved?

Why doesn’t the https://www.sonos.com/da-dk/shop/shelf-one-play1 offer wireless charging of mobiles put on the shelf?

Hi there,I have recently discovered Amazon Music Unlimited’s Atmos music offerings (as well as its Ultra HD). In my living room, I have a Beam Gen 2 + Connect Amp (S2) connected to some ceiling speakers acting as surrounds. If I play Atmos content to just this setup via Amazon Music on the Sonos App, “Atmos” is clearly displayed in the app showing that the content is, indeed, playing in Atmos. However, if I “group” our kitchen speakers (Play 1s) with the ones in the living room, the display changes to HD. Now I know that Play 1s max out at HD quality, but does this mean that the entire stream has downgraded to HD as a result of grouping? Or will the Living Room speakers continue to play in Atmos quality (despite what the display says)?I guess part of this answer depends on how the speakers and stream interfaces, and it’s beyond my understanding. I suspect the whole stream does indeed get downgraded to HD, which is a shame for those of us with open plan configurations, but would be grea

I've recently purchased a new Pioneer TX55JZ1000B tv and whilst I can connect through the app my phone for the volume it will not sync to allow me to adjust the volume on the remote as all my other TV's in the house so?I currently connect via a optical cable as that is the only option on my soundbar....any help would be appreciated. 

I am an amateur radio operator and when I operate on frequencies 4 mHz or below, my arc sounds the Alexa beep and the surround speakers make rapid drumming sounds (this is with the system off).  When the system is on, the volume will increase to maximum.  This occurs at very low transmitter power (10 watts RF out).  I called Sonos support and after about an hour and talking to two different people, they said they had never had this issue and that it was outside their support.  Any other hams have this issue?  I find no FCC acceptance stickers on the Arc, Sub or Surround speakers.  My transmitter is properly grounded (for RF suppression).  

I will be moving to Australia from Canada. I know we have different power cycles and I can use my Sonos equipment on their power but where can I buy the replacement power cords? Thanks for any info.  

I have Apple TV 4K and the Sonos Surround Set (ARC not Playbar). My TV is a Sony Bravia 4K (KD 55X8509C) from 2015.I know that I won't be able to get Dolby Atmos until I either upgrade my TV or buy an HD Fury Arcana.However, when I first got my Sonos set, I could get Dolby Digital 2.0 or 5.1 on Apple TV 4K (on Disney Plus, Netflix etc). Now, everything plays in Stereo PCM. I haven't changed any of the settings. I've used the same content as I did when I got DD2.0 and 5.1.Any ideas? What's going on?

Has anyone received their order placed on/around Boxing Day? 

Can an arc be installed vertically?