Show off your setup or get inspired by others
Recently active
I just purchased a home with in-wall speakers and wall controls in about every room. These speaker wires all terminate in the living room near my entertainment cabinet to a Niles HDS-6L Speaker Control Box. I have a Sonos Playbase and three other Play:1 wireless speakers. I simply want to push the Sonos Playbase audio to these in-home speakers. How to do?
Is there any news on when volume normalisation will be available for playing spotify through sonos speakers?I’ve just purchased 3 speakers for my business and I’m getting really frustrated at having to constantly alter the volume because the playback is either too loud or too quiet.If it’s not something you can/want to do please let us know and the reason why. I think we deserve an honest and comprehensive answer.
Hi All,it would be so cool to have a Mini-Controller / Now Playing screen app for the apple TV.ThanksJesko
I ordered in April with a May 6 shipping date. It has been “preparing to ship” since the 6th. Has anyone ordered an amp of late and are you on the same delay? Not a huge deal but I have an all new music room set-up and all that is missing is the amp.
I run a split system, usually without issue. However after the Desktop S1 app recently got confused and needed a Reset, one of my Play:5 Gen 1s has become quarantined. It shows in the ZoneGroupState like this:The IP address is correct, but the name is wrong (that is the name of a Beam Gen 2 on my S2 system).If I run the S1 Mobile app, it lists “Den” as “Needs update”. If I try to take the update, it says none is available.How do I get my Play:5 back into a usable state?
HelloI have an LG OLED65CX6LA TV connected via eARC to a Sonos ARC purchased last November. Working perfectly during all this time. It is connected to a Sub and two Play3 as rear speakers.Since yesterday the remote control of the TV has stopped working and I have to adjust the volume of the bar with the iPhone or with the touch buttons on the bar. The TV remote works perfectly with the internal speakers of the TV. I have changed the HDMI cable to rule out a malfunction of it. I have reset the bar to factory values but the problem persists. For a while the remote worked but the sound switched between the bar and the TV's internal speakers.The sound from the bar is still perfect and I can comfortably watch movies in Atmos and Dolby Digital. But I can't adjust the volume. The only way to do this is to watch TV through a second-generation Apple TV 4K. The Apple TV remote works perfectly through the IR port of the ARC.The TV updated WebOS a couple of days ago but the problem appeared yest
I have a Sonso Surrund sound system on my in-house wi-fi and I want to set up 2 Play One speakers at my pool on another wi-fi how do I do that?
Hello all, just a quick question to ask what content people are playing that provides Dolby Atmos True HD?.4k Blu-ray seems to be one but what else?.Still weighing up options, I have an Nvidia Shield Pro that is capable of 4k and Atmos True HD output from streaming services.Is Dolby Digital Atmos compressed noticeable poorer than Atmos True HD?.I presume best Netflix offer is DD+?.
Hey everybody,we are having troubles to connect our Sonos Beam (+ 2x Sonos One SL) to our projector Epson EH-TW7000. Our end goal is to have 5.1 Sound. Our main input is a FireTV Stick.The projector doesn’t have any HDMI Arc output nor an optical. I already bought a HDMI Matrix Switch and tried to connect it with the optical adapter that came with the beam as I noticed the HDMI Arc doesn’t work. Unfortunately I had no luck with getting a connection even through the optical...This is the HDMI Matrix Switch I was using:https://www.amazon.de/gp/product/B07Y2GMC3G/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1Is there anything else I have to set for the sound to work? And if possible a different solution to get 5.1 Sound as I heard that optical is not compatible.Thank you so much!
So I have a beam with x2 One SLs connected to the TV for surround & WiFi for multi room where I have other One's around the house. All are fine except when I'm near the One sl's (around 2ft) in the living room that are linked to the beam where they start cutting out & in like interference. Anyone else experiencing this issue?
Hi,Just purchased a Samsung Frame TV (2022) and am considering buying a Leon Frame bar as it will match the aesthetics. This soundbar does not have an HDMI Arc connection. I have previously installed in-ceiling front and rear speakers, which I plan to connect using separate amps.Relatively new to this world, but I’m concerned I won’t get 5.1 surround with the way I’m trying to set this up and would appreciate guidance.Samsung Frame TV to Sonos Amp (HDMI), same Sonos Amp to Frame Bar (Center speaker) Front and Rears each with their own Amps. Sub on its own.Will I get 5.1 out of this setup? Apologies if this is obvious, appreciate your input!
Is there any difference between having a Boost connected to the router vs a Play 1 connected to the router?Do they both provide the same quality of mesh? Or is the Boost better because that’s is only function?thanks
I just got a sub to pair with my Sonos amp and 4 ceiling speakers that are non Sonos. I am wondering what I should set the crossover frequency at? Sub is under my tv in a larger living room. Also any preference in laying the sub down or standing it up?
Hi Guys Anybody know (or suspect) if Sonos will support real Dolby Atmos in the future? By ‘real’ I mean a 7.1.4 setup. It could be with the Arc acting simply as the front left-right-center, and then a slew of Ones or Fives as rear, side and height speakers. Could that be done via a firmware update? Is it likely? I have a setup right now with the Arc, two Subs and two Ones for movies. It’s great, but real Dolby Atmos it is not:-) Kind regardsMads
Hi. I am mounting my Playbar on the wall and would like the wiring to be as discreet as possible. I was originally going to use a ninety degree connector for the figure of eight mains cable but now realise that will not work as the socket on the Playbar is recessed. Anyone found a neat solution to this? Any help hugely appreciated.
I have amazon prime / amazon music (not unlimited)When I try to open amazon music through sonos I get the message 'Request Operation Failed'I have tried to remove and re authorise my amazon account within the sonos app which hasn't made any difference.I have also checked my membership status in amazon music which is correct.After looking at previous threads these are the only suggestions but neither work.We've also tried this on my wife's phone (she uses apple where my phone is android) and we still get exactly the same message. Any help would be appreciated please?
I have the Arc, Sub, and Sonos 1 in a surround setup, connected to an LG CX via eArc. Previously I had the PS4 outputting Bitstream (Dolby), and Sonos reported Dolby Digital 5.1.The fix that added LPCM to Sonos Arc recently went live, so I updated PS4 Pro to output PCM, and the HDMI input on the TV to PCM. (The output remained Passthrough). After doing this, the System Status page for Sonos shows Multichannel PCM 7.1.However, I now get no rear surround audio in games like Assassin’s Creed Valhalla. (It’s not faint, there’s really none.) I get the full surround experience if I change it back to getting Dolby Digital 5.1. On the PS4 Home screen, I do get sound from the rears in PCM 7.1, albeit very faintly, compared to Dolby Digital 5.1.Does Sonos not downmix the extra channels properly? It’s kinda bad that a higher fidelity signal sounds worse.
Hi all , hope you can once again help me out , in the notification panel on my phone it says " Dolby digital 5.1 " , which is great but when I watch something in Atmos it's blank ? As you can see , thanks
LG OLED BX 65Sonos Arc + Sub + SL x 2 This problem began a week or two ago. I noticed there was no audio coming from the sub and surrounds while watching an Atmos movie, the only sound was coming from the Arc. Everything in the app was fine and seemingly still connected. So, I rebooted everything and all seemed well again until I had to pause what I was watching for a few minutes. When I unpaused, the Sub and surrounds were once again not emitting audio.I tried changing what I was watching and tried moving from the Apple TV to a Blu-ray player and even to the TV’s built in apps, same result, no audio from the sub and surrounds, only the Arc was working, no matter what type of audio I was listening to, Atmos, Music, PCM, Dolby Digital etc. The only solution was to reboot the router and unplug all 4 Sonos components, reconnect everything and then all speakers would work again, until there was another situation in which i had to pause or even turn off the TV. Is anybody else facing this r
Hello all,I know Sonos can't currently use speakers as left and right channels, but with the last few updates and being able to control things like height channels it got me thinking. It would be nice if you could add play 5's as independent left and right channels and if paired with an arc or beam would drive the audio accordingly (like how it processes the rear surround sound). I've looked around at some of the threads but haven't seen any that really discussed if it's more company direction or audio engineering issues that they don't push for that.My current set up (pics below) is Arc, gen 3 sub and two play 5's as rear. The play 5s for rear are overkill (and awesome) for movies but we listen to alot of music in the common area and they're great for that. Instead of a dedicated theater room we went unconventional and threw a UST 4k projector (120") in our livingroom. The wife wanted a clean set up which is why we went with Sonos. The Arc and rear surround sound is solid, but t
I’ve had my Sonos Arc for about a year now and it was working just fine up until about a week and a half ago when it just completely stop putting out sound from the TV. I reset the Arc to factory settings and went through the setup process again and everything goes smooth until I get to “Use your TV remote to turn on TV speakers in sound settings.” When I hit test connection it says “TV speakers not connected.” Not sure what to do, I’ve unplugged all other hdmi cables, the TV is an LG C9 if that helps.
Hi All, My Sonos Beam has randomly started to make a beeping sound almost as if someone was hitting the mute button on/off in rapid succession. I’m a bit lost on what this could be? This even takes place when the TV is off. I’ve tried restarting the device, changing my Wifi channel, unplugging as well as a different HDMI cord to the TV. Has anyone experienced this before?
I have a couple of old Sonos Play:1s which I used to run from the router via a Sonos Bridge. This stopped working a while back, so I now plug one of the Sonos Play:1s directly into the router. Is there anyone out there who has the Sonos wired product and a Sky Glass TV and if so, have they managed to get their Sonos connected to the internet and working? Many thanks, H
How can I get a purchase receipt for a product that I bought on the Sonos website?
Hi There, Just wondering would it be possible that i could get Dolby Atmos to pay from my Gen 1 Sonos Beam while connecting it to a Sony A90J. Planning to connect Apple TV 4K that support Dolby Atmos too direct to the TV while the Sonos Beam is connected to eArc port. If yes what setting do i need to set to get this to work.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.