Spaces & Setups

Hi there I can’t seem to find a clear answer to this question.I have two rooms that I’d like to power with a single sonos amp.  Each room has two ceiling speakers that I'd like to replace with architectural ceiling speakers.  I realize only one audio output can be sent to all speakers, but can I ‘shut off’ individual architectural speakers, to only play the sound in one of the rooms?  I was hoping to set this up with airplay 2 and Apple Homekit to control the speakers of each room. Thanks

Ho acquistato sub usato, come faccio a sapere a quale generazione appartiene?

Anyone else get this to work?  It is part of today’s 13.4 update.   But when I try to toggle battery saver mode to the On setting -- it immediately toggles back to “off” on its own.   I can’t get it to turn on.  Am I doing something wrong -- or is anyone else seeing this? I’m using an iPhone X -- latest iOS updates applied.   I have a Roam I’m trying to apply this to.Here’s what it says to do -- and I’m doing it (trying to):Enable Battery Saver on portable Sonos products | Sonos 

I'm wondering if someone could please help me out with my Beam soundbar. I have a 2007 Sharp Aquos LC-42XD1E LCD TV which i'm trying to connect to the beam , but because its an older TV it doesn't have a HDMI ARC connection, only a standard HDMI connection. It also doesn't have an optical digital port either. Is there any suggestions as to how i could get it working? I have attached a photo of the back connections on the TV, any help would be greatly appreciated 

I can’t seem to find a solution to my problem. I have a gen1 Apple TV 4K connected to my LG OLED C1 TV, which is connected to my Sonos Arc. When I set the TV to PASSTHROUGH, I get Atmos content no problem from my Apple TV, but I get no sound when playing Dolby 5.1 content. Sometimes, after resettling everything, I get sound but it comes in as Dolby Multichannel 7.1, which obviously isn’t correct. If I set my TV to AUTO, the content will play as Dolby Multichannel 5.1. I was told Passthrough is the best option but it sucks Audio doesn’t work for 5.1 content. Am I doing something wrong?

Hi,Earlier this year I followed instruction to download the new Sonos app (think its referred to as Sonos 2) and connected my 2 existing Play 1 devices. However I rarely use them but went to check them today and the app wont connect to them, in fact the “system” screen is all greyed out where it should show each Play1 device. Im getting an error message “unable to connect to Sonos” and when I try follow the “lets fix it” message I end up going around in circles. It’s as though it has an issue connected to my wifi/internet connection, and that works fine for all other devices. Any advice would be appreciatedThanks

Would anyone have advice on connecting the Steepletone ST918 turntable to the Sonos One speakers.It has Line Out (RCA) AND sub woofer out connections.  I have been researching online and think I could use the Sonos Port but I don't want to buy it unless I'm sure its worth it.  Any advice appreciated  

I set up my Hd Fury Arcana to Beam gen 2 and connected Apple TV 4K 2021 model. I have set the Arcana to beam on but I don’t get Dolby Atmos just DD 5.1. When I changed the mode to EARC and turn off beam mode on Arcana I don’t have volume but can set up Dolby Atmos on ATV.  Arcana has the latest software version 0.84. I have watched on You Tube how to set up but I am not winning! Any suggestions would be appreciated. Thankyou in advance.

Hi everyoneI've got a Sony X950H and for the most part the Beam Gen 2 works quite well. That is except with the PS5. I've had audio delay issues when using anything but Linear PCM, so I switched to this setting. The issue I have now is that the volume (and perceived fullness of the audio), doesn't compare with the Dolby audio setting.Has anyone else experience this and will there be a fix coming?Thanks    

Can we please get back the ability to adjust the crossover on the sub. Why was that removed it was a great feature and made the system sound so much better.   Thanks 

I added my computer as audio source per the instructions from Sonos and SWYH and Sonos app confirms its been added but I can’t find it anywhere in the app.   Also where is Tunein in the app?  I can’t find that anywhere either.

Hi Everyone! I would like to  update "my sonos-5" and "connect" with new sonos items to be able use everything under S2 program. I heard that I can be granted for 30 percent discount for that. How can I proceed ? Help is most appreciated!

I recently moved house to a place that has speaker in the ceilings throughout the downstairs. They are all wired through to a comms box. Do I need the Port or the Amp to set this up and will it allow me to play different music in each room or will it only allow one song to be played throughout?

I wanna buy a turn table to play vinyl via a preamp on two play 5 (2 nd gen) speakers set on stereo and I was wondering if the line in mode keep the sound analog 🤔

Hi everyone.There is a lot of discussion around this and it sounds like my setup won’t work.  I’m new to Sonos, so I’d really like to go with Sonos, so I want to make sure this won’t work before moving on.My intention is to setup Sonos Amp for both my Samsung Frame TV and record player.  The room has 4 surround in-wall dumb speakers.  To make this cost effective, I’d like to keep these speakers and replace the other 2 pairs of ‘in ceiling’ speakers in the house with architectural speakers to play selectively digital music as different rooms.  I’d like to use the existing dumb ceiling speakers for my living room with the TV and record player.  Am I correcting in understanding that because I am setting up as surround for the TV, the amp could not be used to play vinyl out of the dumb surround speakers because the line in is disabled?As a workaround, could the second amp be used as the line in for the record player?  Could it then play the vinyl on the surround setup through the other amp

Hello, I have a question that may be absurd. Does the SONOS Arc have an HDMI ARC or is it HDMI eARC ?. The doubt comes from the fact that on the website, in the summary section, it appears as HDMI eARC but in the specifications it says HDMI ARC. Can someone with SONOS Arc answer? Thank you

Hello. I've got beam (gen2) and first gen symfonisk table lamp. I would like to buy another lamp to make them both work as a pair (surround/stereo system). Will the new generation symfonisk lamp pair with the old one (1st Gen with 2nd Gen)? There is no old gen lamp in shops already in Poland 😔

I can’t seem to find Virgin Anthems in radio, only Virgin Radio. I have tried copying and pasting Virgin Anthems URL into add radio station in Sonos but that does not work. Any suggestions please?

Has anyone installed a full motion wallmount rack that pulls down as well with a Sanus sound bar extendible TV mount design for Sonos arc. Looking for thoughts on a full motion wallmount that pulls down that the sanus extension can be hooked up to it.

We have a dog and at present we have a radio on all day for her whilst we’re at work.  She goes to Daycare at 10 and returns at 2pm.  I want to set up my Sonos Beam to play a radio station from 8am-10am and then from 2pm-6pm……is this possible? 

Hi,I have never owned any Sonos stuff before and was looking at buying some for home cinema experience. I have SkyQ with Sony TV and was going to buy a beam or Arc but then read all the stories about lip sync issues with Sky. If spending that much I just want something that will just plug in and works.Does everyone have lip sync issues or is it only the exception?Thanks   

Soundbar was working fine before holiday. It was switched off at the mains with all our other electrical items. On return it’s stopped working.Power lead is fine, I have tested on another Sonos product.Any ideas ?

G'day Community. Hope all are well! My first Sonos community post, after setting up my Arc, One SLs (surrounds) and Gen 3 Sub, which all has been Trueplay tuned and sounds pretty mint, so am really pleased.  No niggles, really impressed by the quality of the sound for movies and music, and music's where my query's centred, specifically Deezer (Premium).My question,  which may have been asked a million times (apols) - How can I tell if the track I'm streaming is high definition audio - I did look within Support and the community, and found the below in Sonos support, but this does not seem to apply to either the Sonos S2 app or the Deezer app (Android) and the following options are nowhere to be found:"How can I tell if the track I'm streaming is high definition audio (FLAC)?Select Info & Options > Track Format. You’ll see the format here (FLAC or MP3)"Ok, so, I'm aware (thanks to the community) that I can verify HDMI input from my tv/xbox e.g. Atmos by checking Sonos App when pl

I hate Autoplay. A few weeks ago I had a clean install on my computer (Macbook) and then installed Spotify and connected to my Sonos system to listen to some nice music. As it turns out after a while, Autoplay is enabled in Spotify by default. No worries, I disabled it in the Spotify settings. In the very rare occasions when I listen to music on my Macbook (not through Sonos) it respects my choice just as I expect. However, in the meantime Sonos seems to have remembered that Autoplay is ON and since then everytime I listen to anything through Sonos started in Spotify, Autoplay is enabled and it starts to play random music after my playlist or album has ended. (Did I mention I hate autoplay?!) It’s all the same if I play music through Spotify using my iPhone. I looked everywhere in the Sonos app both on my Macbook and on my iPhone, but can’t seem to find any switch for that. Damn! Where do I click?

I can buy a Sonos Arc sub - Gen 1 for $400 Canadian versus a new sub Gen 3 for over $1000 Canadian after tax.From what I understand the Sub Gen 1 will work with the Sonos Arc and will work with Sonos app S2 system.   Obviously there have been changes but from what I have been able to learn, maybe the changes are not too significant.What would you do?