Show off your setup or get inspired by others
Recently active
Hi, I’ve been experiencing a bug on my Sonos One players recently.I’ll select a song that I want to play using the Sonos controller app and then select the repeat song button (tapping the repeat button twice so that the icon with the 2 arrows and the ‘1’ inside the circle appears). The song will play normally during the first playthrough, but after that, the song always skips after the first 19 seconds (this is very consistent). Sometimes an error will display in the Sonos app about an unsupported encoding, sometimes nothing shows up.I’ve used both the iOS app and the macOS app and get the same results. FWIW, the song is this one from Spotify.My workaround is to create a playlist with at least 2 songs and then have that playlist play on repeat, which for whatever reason seems to stop the bug from happening.Any help would be appreciated. If nothing else, I just want to make sure the Sonos team sees this bug report. Thanks!
Future request.I would like the option to lock the entire groups volume, so that adjusting the volume on any grouped speaker would adjust the volume for the entire group. This would work in the same way as the master volume in the app does. As far as I know, this is not possible now?
I have a Arc with sub and 2 ones in one room and a pair of fives with sub in another room. In the room where the fives are I would like to adjust the crossover frequencies, but seems like this isn’t possible. Why? This is the first system I have owned with a sub where it isn’t possible to adjust the crossover.
I’m investigating an upgrade of my existing home theater to Sonos and would love some guidance on options.Setup:Traditional Pioneer Amp 2 front, 1 center, 2 rear and a sub all hard wired Apple TV connected into Amp Xfinity ‘box’ connected into Amp TV connected HDMI into Amp All sound for TV goes through amp 2 outside wired speakers connected through ampI would love to use all my existing stuff but happy to part with my old amp.I would love to have the ability to play something on the TV and something else on my outdoor speakers. Thoughts?
Has anyone noticed that when you choose 'All Artist Tracks' from Amazon Music it only shows the first Album in the library, rather than all of them?
I moved into a house that had 5 ZP120s wired to different ceiling speakers throughout the house. I talked to a pro installer and he said I had to replace all of them to get the speakers to work. I would really like to avoid that, at least for now. Should I be able to use those existing amps? Do I need to reset them and use the S1 app? Are there any guides for making use of inherited/second hand Sonos equipment? I’ve seen some confusing information about whether those devices are still viable or not. Thanks!
Hello! My outdoor space has an amp and 4 Sonos architectural/outdoor speakers installed. I really need just one more speaker, but 6 would be too much (from a visual/ symmetry perspective) I know an amp can drive 6 architectural / Sonos speakers, but what happens if I only plug in 5? Does that create an imbalance issue with the ohm load? Thanks!
Hi,I find that with the amazon music apps, rarely, but sometimes the sound increases by itself by about 40%, and most often it is 5 seconds before the end of a song. Problem between Amazon and Sonos system? Just Amazon streaming service problem? What do you think about that?Thanks
I have been having MAJOR issues since February 2022 related to SONOS Playlist appearing and disappearing from the iPhone APP. I have an open case and have worked with technical support and no resolution has been found. This use to work with S1 hardware but since updating to S2 it has not worked correctly.When will this be fixed?
.: Hello. I am a Sonos newbie, this is my first post, and I am not very tech-savvy when it comes to sound systems. Recently, a friend guided me through the purchase of an LG 65” 4K tv and a Sonos Arc sound bar. I would like to add a turntable with pre-amp and a DVD/CD player to my sound system, but as best I can tell, one cannot do this with the Arc. I’ve perused the Sonos site to try to get a better understanding of what component(s) I would need to add, and the more I search, the more confused I find myself.Ultimately what I would like to do is have the outputs from my turntable (old, not wifi-enabled) and my DVD player (wifi-enabled) play through the Arc (if that’s even possible), and/or through wireless speakers, like the One SL. I gathered from my searching that I would also need the Amp. From what I can see looking at the back of the Amp, only one device requiring RCA cables can be attached to it. If this is the case, would I need two Amps, one for the turntable and one for the D
Bought a Port to connnect my old music system to my Sonos speakers that I uses to stream music (2x Play 1s, 2x Play 5s and 2x Moves). I cant figure out what connnections to make between the Porrt and the back of the HK. I have now spent about 1.5 hours reading numerrous things on-line and within this community, but can’t fuigure it out. I want to at least play vinyl from my old turntable, old CD player, and old casssette deck, all of which have RCA plug-in jacks on the back of the HK (There are actully 2 sets of Tape Mon jackson on the back). The back of the HK also has Aux jacks, Main In jacks, Pre Out jacks, and Sub Out jacks. I do not plan to wire any apeakers to the HK, Just want it to stream music from the foregoing devices to my Sonos speakers. Thanks
A current sales price is a better deal than the upgrade program, but said credit is preventing me from getting the sales price. I understand that offers cannot be combined, but how can I get those credits cleared out so I can qualify for the sales price?
My tv and Sonos Arc sound bar are in the front right corner of my living room. I use two Sonos Five speakers for my rears. My sitting position is very close to the right rear Sonos Five. The left rear Sonos Five is about 11-12 feet away. I am wondering if I add a Sonos One to the front left (also about 12 feet from my sitting position), would I get more left side sound than what I am currently getting?
Yesterday my Beam stopped properly responding to Spotify requests whether they were Alexa-voice requests or directly through the Spotify app. It starts to play after a LONG while then stops. The starts again. Very odd. Nothing has changed. Not having this issue with my other Sonos One
Hi. I have an Arc, Sub and 2 One surrounds. Sometimes when watching TV I am in my kitchen and would like to know if I can add another speaker that would play the entire audio track so that I can hear the sound from what is on TV better without having to turn up the overall volume too much.Thanks!Marc
I was an early Sonos adopter and have a perfectly functioning system including a number of original Play 5 devices. As a result, I have never upgraded to the S2 operating system. I would now very much like to buy a Beam Gen2, but see that that requires S2. However, having set the beam up, i hope that I would actually need to control it with anything other than the to standard remote control. considering this, is it possible to continue running my S1 system in the house, but set up the beam to run independently as a to speaker only?Thank in advance of any advice you can provide..
Hello, I'd like to be a able to stream podcasts from my Android phone Podcast Republic app to my Sonos beam. Is this possible?At the moment, I listen to podcasts via Podcast Republic app on my Android phone through phone speaker or via bluetooth speaker but it would be great if I could listen to them via the Sonos Beam as well.Thanks, Mark
I want to connect my system to KEF LSX2 powered speakers, which Sonos product do I need?
Where can I find the configuration for setting the default volumelevel?
I have two configurations, one LG TV (2018 model 55SK9000PUA) connected to a Sonos Beam (Gen 2) using HDMI ARC and another LG TV (2019 model 43UM7300PUA) connected to a Sonos Ray using optical. When the TVs Digital Sound Out is set to Auto (Bitstream) it struggles with dialog sync; the severity varies between programming. If I set the Digital Sound Out to PCM there is no problem. The sync issue is more difficult with the Beam connected by HDMI ARC than the Ray connected by optical (why?). In the former case, setting the AV Sync Adjustment (on the TV) to 3 seems to provide pretty good correction. The audio quality of PCM vs Bitstream in the Ray configuration does not seem to make any difference. Even when set to PCM the Ray (with Sonos One surround speakers) produces surround sound for relevant content. This seems to conflict with reports on the internet that PCM is only two channel; can someone clarity that in this context?Bitstream in the Beam configuration produces a fuller sound tha
Hi!Would it be possible to play a musical instrument (for example guitar) through any of the Sonos products with line-in input, and not having latency issues? I’m looking at Five speaker, line-in sounds tempting, but how many ms latency does it have? I believe 12ms is a rule of thumb acceptable for live performance. It’s for practice purpose. Era 300 will probably have usb-c line in, so that would probably be even more latency, right?
Before I remove my Sonos Arc and run an optical cable behind the wall, I thought I’d ask here first.Has anyone tried connecting a music server (BlueSound NODE) to their Sonos Arc via optical out from the music server to optical IN on the Sonos Arc? Wondering if that works. Logic says it will, but who knows?Thanks for any responses!
Hello allExcuse me if I don’t have all the terms correct, but I’m not very techie! I’ve searched this forum, but can’t find an answer that helps meI have a small system (2x Play 1 and a Play 5 (1st Gen)) and use S1 controller all connected to wifi. Recently the Play 5 has been dropping out so I just bought a second hand bridge for £2 to see if I could use this to boost the signal for the Play 5.I’ve connected the bridge OK but I don’t know how/if I need to ‘move’ the Play 5 off wifi and onto the SonosNet to get the possible benefit. I presume that the 2 x Play 1’s will just stay on the wifi as they are not compatible with the bridge? I’m assuming its possible to have all these products within one controller even if they are not on the ‘same’ wifi?I can’t even find any instructions for the bridge online - does it stay hardwired and sat near the router?Thanks in advance for any guidanceBrucie
I am a new owner of Sonos system (Arc, Sub and 2 One).I'd like to ask if it's possible to connect an EPSON EH-TW9400 projector (no HDMI output or optical port) to my Sonos Arc to get audio dolby atmos.Is it possible If I use HDfury Arcana or any other HDMI adapter?Thank you in advance.
I have an arc and just bought 2 one sl. Not golding good surround on any streaming app whether using native to TCL 65R625 or through apple tv 4k. Currently have TV audio setting at auto for digital output format but have also tried pass through and custom. Apple TV setting is auto, Atmos Available. Sonos app will even show that the sound is Atmos when available. Thanks for any advice
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.