Show off your setup or get inspired by others
Recently active
Hi Guys, I need some help to do the right set up for my house currently under construction.I d like to use in ceiling sonos for most of the rooms + home cinema (in ceiling only) and rock speakers for outside. all linked to AMPs . Starting with the underground, i have a room where i d have 4 in-ceiling speakers + 1 AMP- see belowAll the AMPs would be in racks in a separate roomThen on the main floor I d have 2 inside zones: 1 for the Kitchen/living room in purple (1AMP) + 1 zone for the home cinema. I was thinking about using 2 in-ceiling sonos for the back and 3 front Focal 100ICLCR5 speakershttps://www.focal.com/en/custom-integration/in-wall-in-ceiling-loudspeakers/100-series/in-ceiling-speakers/100iclcr5Should I use a specific AC receiver for that or can I connect those through AMPs; if yes would that mean 3 AMPs (back + front+ center). What about sub?Then the brown one would be for the outside- was thinking about 2 rock speakers (1 by the pool) connected to 1 AMP Finally the master
Has anyone found a fix for sound cutting off when streaming BBC radio stations from another source?IE live radio streamed via Roon or Logitech media server the sound will blip off every few seconds , however when played via the Sonos app its fine.However if I use a newer speaker via Airplay I don't have and issues.Is it simply the processing power of these speakers?
Bonjour Voici mon problème Lorsque je dis "alexa met de la musique pour enfant" exemple. Elle reconnaît bien ma voix et me réponse "voici une playlist pour enfant" et puis rien et ce peu importe la demande de musique que je demande.Elle fait comme si elle lançait la musique mais pas de son.... J ai tout remis comme usine puis refait toute l installation. Mais cela ne change rien.... Cela est entrain de me rendre fou 🤪.. Avez vous peut être une idée ? Merci d avance Moderator edit: Google Translate (French):Good morningHere is my problemWhen I say "alexa plays music for children" example. She recognizes my voice well and replies "here's a playlist for children" and then nothing, no matter what music request I ask for.She pretends to start the music but no sound....I put everything back to factory and then redid the whole installation. But that doesn't change anything....This is driving me crazy..Do you maybe have an idea?Thanks in advance
I’ve been having terrible trouble playing music from my Synology NAS the last few days.It will play a bit of song then cut out, skip to the next, then give up entirely. In the NAS logs it says:Host [192.168.x.x] failed to connect via [SMB] due to [SMB1 not permitted].Reading some older forum posts it says that Sonos now uses SMB2, so why is this error coming up all of a sudden?Is there a way to check if Sonos is using it, or force Sonos to use only SMB2?(incidentally, I tried enabling SMB1 on the NAS temporarily, and it made no difference).
I have Sonos amps and speakers installed throughout the house. In one room the Sonos Connect is installed so that I can listen to music through my higher-end stereo system. The Connect is connected to a Pre/Pro controller via a coax cable. When listening to music though this set up I have to greatly increase the volume on the pre/pro and also have to increase the volume on the Sonos app to get to normal listening levels. How do I change settings within Sonos so that I don’t have to increase the volume so much?ALSO, and this is the crazy part, when adjusting the volume I inadvertently turned off my 5 channel power amp but I could still hear the music coming out of my speakers. How is that possible? If I change the input on the pre/pro to my laptop and use Windows Media Player to play a song and I turn off the power amp there’s no music.Thanks in advance for any help and guidance.
I have a five, and we’re putting in a kitchen in a large area. Am I better to get:x2 era 100 and stereo them? x1 era 300 and utilise the dolby sound another 5 because I love it (but it’s quite big!) and stereo them? or is this overkill?I have x2 ones, a sub and an arc set up in the next room as a surround sound system, and a couple of roams that fit in pretty much wherever I need them. The kitchen system will be static and high enough that I won't be using the controls on them. I run IOS from phone or macbook Thanks :)
Feature request - Add Volume numbers in the Mac/PC app next to volume controls.
Feature request: Add Dolby Atmos logo to Mac/Windows app for songs that are in the mentioned format.
Using the S2 app on Win11, I don’t see any mechanism for doing basic care and feeding of my Sonos system. All I see is essentially a glorified music player.In particular, I would like to control the balance, but cannot find a control to do that.
I’m looking at purchasing the Pro-Ject T1 turntable and would like it to play on my current Sonos system in the home - I have the move, ray, one SL (x3) all grouped. I see that I can purchase a set, the Pro-Ject T1 turntable and five. the question I have is, if I buy the turntable and the five, will this link into my current system and play across all speakers? the other question is, do I need the five, if not what else would I need to have the turntable play across my current system thanks in advance
Who else is sitting in this boat with my lame butt? Lol. Was unable to get stands for these things. Much larger than I imagined so sitting on end tables isn't happening (and not positioned optimal either with this option. I just do not get why everything they launch a new product, there is never enough stands. They sound great sitting on make shift stacks to test them, but will be getting packed up until I can get stands (anyone who is married gets this). Again I just don't get how they are never ready for the stand demand every single time.
I have a set of Spatial Audio (Dolby Atmos) compatible speakers: an Arc, 2 x Era 300s and a Sub.When I read various articles, I get the sense that the only way to play Spatial Audio from Apple Music is via the Sonos S2 app, and that it won’t be lossless. Is that right?If one plays from the Apple Music app (iOS or OSX) over AirPlay 2 to these devices, I further get the sense believe that the music won’t be Spatial Audio (or lossless). Is that right?
Our band performs regularly at a small club that has a multi-room Sonos system installed for recorded music when the band is not playing. The system sounds really great - loud, clean, excellent coverage of the venue. Our own PA speakers are high end, but they are too loud up front and not loud enough in the back, always a challenge. I would like to patch a line level output from our band’s mixer into the Sonos system when we play. Exactly what would I need to do that? Club owner is hesitant - he seems to think we could harm his setup. He has not told me exactly what Sonus gear he has. All I know is that he controls it all from his phone, and it is high end. We could run a cable to his central Sonos device assuming that it has a line level in… or we could go wireless - I believe Sonus has a device, or we could transmit over wi-fi with a non-Sonus receiver by his central device.Any advice without knowing his exact gear? I’m sure I will ultimately be able to find out, but I would like to
Hello everyone from Rome :-)I write because I need the experts of this wonderful brand!I have a full system with Arc + Sub(Gen3) + One, I only watch movies with 4K discs and Playstation 5.I would like to understand if the addition of the Era300 gives me something more about the Atmos, given that the Arc itself already has speakers that go upwards for the Atmos effect.Does buying the Era300 increase the atmos effect? So I would have the Arc + Era300 atmos speakers?Thanks to everyone for the precious advices!
Hi. I just purchased by first Sonos SL, i set it up but i cannot find Apple Music in Sonos services. i checked the country settings, i uninstalled and reinstalled Sonos, i signed out and in from my apple subscription account .. What else can it be? it is getting very frustrating..
Era 300 Era 100 Move (Gen 2)https://www.theverge.com/2023/2/6/23588049/sonos-era-300-100-optimo-speakers-leak-features UPDATE: https://www.theverge.com/2023/2/20/23606369/sonos-era-300-100-speakers-leak-features-price-photos
P****D OFF CUSTOMER HERE!!!I got 2 ea ERA 100 and 2 ea ERA 300 for a SURROUND SOUND system, well guess what they dont wokr togther with ARC, I was told by a rep yes all good and will work, so I preordered and waited weeks. Get them today and well the 100 and 300 DO NOT DO SURROUND SOUND TOGETHER, so I call Sono and for a SURROUND sound you need to have either 4 ea ERA 100 or 4 ea ERA 300 - YOU CAN NOT MIX AND MATCH THEM - LIKE REALLY WTF!!!! How lame a$$ stupid is that!!!!!!! Wasted time and money!!!!
Can’t add my Sonos to Apple homekit. Searched all on the web and no solution works. Have tried everything i found. Is there any plan to solve this issue? Loosing my faith in Sonos soon if this not will be fixed imidiatly.
I have an Audio Technica 120-USB turntable with its own pre-amp that I would like to connect to either a Sonos 5 stereo pair or Sonos Era 100 through the new USB-C connection. Can I connect the turntable to the Sonos 5 or Sonos Era 100 on the left side and have it play in stereo with the matching speaker on the right side of my bookcase. Also, will the turntable sound, once connected to a Sonos Speaker be listenable by streaming to my Sonos Arc in my other main room? Assuming the turntable is connected on the left side speaker, can I then connect a CD changer to the matching Sonos speaker on the right side through the direct USB-C input and if so, will the CDs play in stereo through both speakers. Therefore, when I turn on the CD player, will the Sonos speakers in the room recognize the unit and play, and then, when I turn on the turntable in stead, will the same speakers recognize the turntable through the connection. Will the CD player connection also stream to my Sonos Arc in my
Replace my Sonos Gen one ( pair) with a pair of Era 100. Really pleased with the new speakers. Worth the upgrade in my opinion. The setup was not straightforward. Initially used my phone to set up the first speaker only to have an error message ‘ another App using airplay’ Could not work that out so I used my iPad. All went OK. There was an issue with Alexa in that I couldn’t get Alexa to work with the new speakers. Seems that was my fault for trying to add the new speakers with the same room name I used on the Sonos ones. Changed the room name and all was well. Overall I am impressed with the pair of Era 100. They sound terrific as a stereo pair.
I’m looking for advice on how i might improve my current system and if indeed changes will improve it. Not able to finance multiple upgrades so need to do in phases. I’m looking at Phase 1 purchase this Easter, phase 2 next year. i currently have a Sonos amp to wing I’ve connected a Pro-Ject turntable and Terri stand alone 1990’s Polk speakers. These act as the front right and left speakers. The surround speakers are two Sonos Fives in a vertical position so confused for stereo sound. My question I guess is what can I add to this system to make it really sound better?1: Will adding a Soundbar really make a difference, if so is the Arc the best choice? 2: Is that Preferable to adding a Sonos sub woofer, which one?3: What should i prioritise for phase 1, Soundbar or sub woofer?4: Even though i love the old Polks would the system be better enhanced by replacing them as front speakers with speakers from Sonos? Would i be better served by moving existing Fives to replace Polks and buying
Hi all, I recently moved into a house with existing wired ceiling speakers right above the TV unit and I already own an ARC, SUB and two Ones as surround. Is it possible to hook two speakers to the SONOS system? Would that be an overkill for what I already have? Thanks
Hi Sonos fan,I am currently testing in the Sonos apps, Amazon music and Apple music, in order to later choose one of the two for a permanent subscription.I test both with the same song, (Flowers from Miley Cyrus). With Amazon music, the Dolby Atmos logo is there and the sound starts on the Arc soundbar.With Apple music, if the sound comes directly to the iPad, the Dolby Atmos logo is there, but when I change the destination on my Sonos system, the Dolby Atmos logo disappears and the song starts on the two One SL speakers behind me.So I wonder if Dolby Atmos with Apple music wouldn't be compatible with Sonos, but only in stereo mode?It is curious to note that the same song is broadcast in different ways on my sonos system (Arc SL, two One SL, Sub gen 3), with amazon mainly on the arc, and with apple, mainly on the two one sl . Thanks
I have a pair of Era 300s in my bedroom. While there is an option in the app to turn off the main indicator light, the only way to turn off the microphone (voice services) indicator light is to turn off the microphone.Given that even dim lights can be annoying when sleeping (and the latest research suggest dark bedrooms are preferable), it would be good to be able to turn off the light via the app but keep the microphone on.
can i pair Era 300 with my existing Sub3 and a pair of Play5s(gen2)
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.