Troubleshoot, tune and get the most out of your system
Recently active
I have just about had it with Sonos. In a world of smart people who do this for a living, how are they not able to fix the issues? My system is older (Playbar, Play 1) but that shouldn't matter as long as they are supporting them. Maybe someone here can help me. I start playing music using the Sonos app. I select my room(s) and off it goes. However, after a short time, if I go back into the app, it shows my queue is empty. I can't do anything with what is playing. Even worse, I couldn't answer a call because I had my music louder and I couldn't use the app to pause it. I know I can use the button on the decice but that isn't always the option if I'm in another room. The same thing happens using Spotify or Apple. I don't get it. Figure this out already. I've been a customer a long time but I am at my end point. Makes me not want to upgrade my stuff at all.
Hola a todos, tengo un sistema con un Arc, 2 bocinas Era 300 y 1 sub gen 3, voy a agregar un 2do sub gen 3, pero la app no lo encuentra y ya lo registre en mi sistema, solo me aparecen los otros subs de mis otros ambientes, que procedimiento me recomiendan seguir? Moderator edit:Google Translate-Hello everyone, I have a system with an Arc, 2 Era 300 speakers and 1 sub gen 3, I am going to add a 2nd sub gen 3, but the app can't find it and I have already registered it in my system, only the other subs from my other environments appear, what procedure do you recommend I follow?
Found my previously fine ZP90 flashing red indicating it needed a reboot post upgrade (which I did not instigate). Rebooted it and now it’s dead. Plenty of comments going around about Sonos bricking old hardware, but nee to know if I’m missing something before considering the future. I have a mainly S1 system as it suits my needs. S1 was/is working fine on the rest of the devices, so maybe this is isolated, but this is the wired component and the rest is wireless from it. Doing the prescribed restart (hold in the mute whilst power on does nothing). LAN lights ok, but cannot connect via IP or LAN address. I’m an IT professional, so understand the network, architecture etc, so no, it’s not network related and only affects this item. What next?
4 Sonos ports on managed switch experiencing drop outs. and If we attempt to play music in 3 zones, 1 zone will drop out.We have 4 ports that we want to play the same music through. lets call them 1,2,3,4.We cannot select all four, max 2. So if one and two are playing and you select three, 3 starts playing and 1 stops. The setup runs through a managed switch.We have checked the following two links and ensured that STP is set up correctly: https://support.sonos.com/en-gb/article/configure-stp-settings-to-work-with-sonos https://en.community.sonos.com/advanced-setups-229133/sonos-and-the-spanning-tree-protocol-16973other thoughts we have had but not yet tested: IGMP issues: more than one IGMP or no IGMP on the VLANMulticast limit on the switch set to 2? also seen other feeds that suggest running the 4 through an unmanaged switch and plugging the at into our switch to avoid DHCP issues?
Got the Sonos Ace when it came out. Was able to connect fine to my Arc and eventually my two Beams (Gen 1) in various rooms when they updated the software. Haven’t used my headset in a while and just tried TV Swap and it won’t work. Every time I press the connect button and it makes the searching tone, it just plays a thud sound and reconnects to Bluetooth. I updated to the most recent software. I factory reset the headphones and added them back to my account. Still no luck. Anyone else having this issue and know a fix? Continue to be disappointed with the new and improved Sonos. Had their system for over a decade and it was simply bulletproof. For the last year it’s been nothing but connection and software issues all the time. Amazing they could screw up such a good thing.
Hello.Devices in discussion:Playstation 5Sonos Arc Ultra + Sub Gen 3 + IKEA Symfonisk rear pairPhilips 65OLED705/12Problem statement:I have recently bought Sonos Arc Ultra. I was blown away by the Atmos sound when playing some movies on Netflix. I decided to also turn on Dolby Atmos on my PS5. Unfortunately, since then whenever I use the console and then go back to use any TV App like Netflix or HBO the sound stutters for a second every minute or so. The only way to bring it back is to unplug all HDMI devices, turn off TV for a minute and same for Arc Ultra. What happens and how can I prevent that?Desirable solution:I want to use both TV apps and PS5 without any issues, still using Dolby Atmos on PS5 and also in my movies.
Since the May app upgrade I have almost abandoned my Sonos system . Th Sonos 1 app only sees 1 of my 5 units. I have Sonos 2 app installed on another computer in my upstairs office and that sees 2 other units, but not the one seen by the Sonos1 app. I contacted support and then spent a long time rushing up and down stairs turning things off and on, all to no avail. Is there now a fix or is all this kit destined for the skip?I have 2 x Play 1’s as a pair in one room, 2 other Play 1’s in 2 different rooms and 1 Play 3 in another room.
When connecting the headphones to the TV will the TV still play through my other Sonos speakers? My wife is hard of hearing and want to her use the headphones while we are both watching TV
Sonos arc works thru the app when I play music but when I switch to TV it doesn’t play. Just started happening. I was able hear Sonos both thrust and music app via Sonos now nothing on the tv.
Hello!I’m moving into a new place that has wired speakers throughout the house. The wall plate has a 3.5mm input that uses cat5 to a panel in the basement. The speakers then go from the panel to the rest of the house. The amp has the speaker connectors to output to the speakers but I can’t do that. So my question is, Can I use a 3.5mm to speaker wire adapter? Or can I go from speaker wire to RCA to 3.5mm jack?Thanks everyone!
Hi All, My Sonos system (Arc, Sub, 2x300’s) works perfectly. No issues there. I can log in to the app, again, no problem. However...I also have a pair of Ace headphones and while they are connected to the App, I cannot enable the handover feature from the Arc because it ask me to log in again (I am logged in!) and this is just a repeating cycle that never gets to the next step. So...given the issues a lot of folks have had, I am loathe to delete the App and try to start over to fix this. Is there a fix where I do not have to reset/delete? Cheers!
I am just about ready to give up on Sonos! I have configured a whole house system if you will with Sonos speakers in almost every room of the house including the downstairs but I never know if they are all going to work or just some of them and occasionally none of them. Not a complicated or fancy setup but ever since changing to the new app several months ago, the problems began. The latest issue is that the only service that will come on and stay on is the Sonos Music service. Amazon Prime, Apple Music, Pandora and Sirius XM all have the intermittent service problem and I want to have other services available consistently! I do call Sonos support and spend a couple of hours troubleshooting, get it working for a few days and then, back to problems! Maybe this is just a rant but surely Sonos can do better! I have been using it successfully since 2015 until the last few months with very little problem so I know Sonos can do it.
I have a controller on my iMac from the original Sonos 1 System. Does that system still work? I ask because it seems to be blocked and when I try to connect to my existing system (with 5 speakers) it can’t find them.PS. the controller on my iPhone continues to work fine. So - should the controller on my iMac continue to work?
Will the Arc soundbar link to my Sonos play:5. For example if I were to purchase the Arc sound bar could I use my play:5 as surround sound. Would they link together?
Ever since the Sonos updates mess with everything my Sonos Port just stops working. Everyday I have to unplug and plug it in to get it working. This device feeds my whole house distribution system so it been a pain.Has anyone heard if there is a date when Sonos is going to get its act together and fix this mess. Don’t understand why they just don’t pull the new mess down and put the old app back until they can get it right.very frustrating
I have a somewhat old Amp that seems to have died a few days ago. I was listening to it one evening, and clicked the play / pause button to turn it off. The next day, it was dark and wouldn’t power up or connect. I reset it with the button on the back, and the light will come on and blink white for a while, which is encouraging at first. But then it goes dark. And if you press the play / pause button it will blink red three times, then go dark again.I suspect it is a brick. Looking around the internet, it looks like sonos does not do out of warranty repairs? Just trying to figure out my options here.
I had to completely hard reset my sonos ecosystem install it again to find out.Airplay 2 is still not connectingWhen connected all devices stutter like there is no tomorrow.Please Sonos your helpdesk is 25 minutes waiting for service employee.And they all act like it’s a new problem it’s not.Update firmware find better connectivity in the soft and hardware and end this BSI’m completely busy whole day to achieve listening to stutter or connection failluers.Call Apple and work on a solution otherwise i will never buy your system again.It’s 2025 almost i mean come on. Horrible stuttering not connecting lagging system.
I have been a KPIG listener for 15-20 years. Many know that KPIG was one of the very first streaming radio stations out of Santa Cruz.I have been a Sonos owner for 10 years. KPIG has always been wonderful. However, listening to KPIG is a challenge with the new updated Sonos App, combined with TuneIn radio requiring a subscription fee to listen to KPIG has made it difficult to listen to KPIG via Sonos. As it is at this moment, I have: Sonos on my MacBook with Sonos player v 16.4.2 And have the updated TuneIn Player on my MacBook. YES I can play KPIG from my computer. However I cannot initiate KPIG from my iPhone Sonos App. This is the Black Sonos App. It shows up in my favorites on my iPhone but I have to initiate it from the MacBook. I cannot initiate it from the iPhone. Please advise
The system stops playing every kind of music that I chose. After a few seconds it restarts playing. This happens about every 5 to 10 minutes. I can’t find any problems at my provider, so it looks that Sonos is the problem. Thus anyone now how to correct this problem. It happens sinds the last week.
Hello All, Just a quick question here. I just set up my new ERA 300s as rears for my ARC and sub. I currently have Alexa enabled on my ARC. if I enable Alexa on my Eras as well will that negate the functionality on the ARC or will Alexas response be played through both the arc and the eras. thanks in advance for the help
Cannot get beam 2 to connect to 2 play ones for surround sound
I ask Alexa on the Move to: “Set volume to level 4” - and when I test it, indeed it is OK. But the next time I “Alexa” the volume is again way too load like before. How can I get the Move to hold the volume to which it is set by Alexa?? Thank you. Peter
¿puedo conectar dos tocadiscos Sonos a una mesa de mezclas? ¿se puede conectar todo a los altavoces sonos?Moderator edit:Google Translate-can i connect two sonos turntables to one mixer? can everything be connected to sonos speakers?
Bonjour, Apple musique n’est pas disponible pour ma région, puis-je passer par un vpn ? Moderator edit:Google Translate-Hello, Apple music is not available for my region, can I use a VPN?
I’m trying to add Alexa as a voice assistant to my ERA 100 but when it tries to sign me into Amazon it just buffers. I’ve tried various suggestions like disabling the SONOs skill in the Alexa app, uninstalling the Amazon shopping app but nothing is working.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.