Fix & Optimize

Could I Connect My Freebox delta remote with My sonos playbar?

I can group two Sonos 3 together but when I add a Sonia move or Sonos 5, the app says they are grouped and it is playing but nothing is playing on the 5 or move.

I have been very happy using Sonos until the new app version came. One problem that keeps coming up is that sometimes it’s not possible to play different music on speakers. And sometimes it’s possible????Sometimes is goes down when changing music number or can’t connect to the speakers???

No option to use my Tuner Radio. Only option available is “ Remove Account”  S1 app.

Apple Music not found in Sonos app, no matter what I do. Currently using Spotify but added Apple Music to try Dolby atmos. 

I recently attached my Playbase home theatre setup to a TCL Roku TV. Playbase uses an optical connection.  Currently the only way I can control the volume is via the Sonos IOS app.  On the tv I’ve set audio output to optical - if I set it to auto, the tv speakers are also enabled and they do respond to volume changes. Unfortunately, it creates a delay so the sound echos. The Playbase does not respond to the remote volume control at any point.  I previously had the system attached to an LG OLED and the volume operated fine using either the TV remote or the Apple TV remote.   Both the TCL Roku remote and the Apple TV remotes appear to be RF.  im at a loss…

Yes I know my tv is in a weird position hanging on top of a bed due to setup of room.I currently have the Era 100s setup as surrounds facing directly towards me which is my main listening position which is the chair. I am going to upgrade to era 300s mainly for Dolby atmos and an overall better surround sound experience. What would be the ideal placement for the era 300s as wall mounts preferably (or maybe even speaker stands too if that’s a better option for my room)? I have a pic of my current surround setup of my room below with about 1m space left behind my chair (MLP).Current setup is ARC+Submini+2xEra100. 

We’ve just got a new MacBook Air (running 14.7 Sonoma) which has replaced a broken iMac desktop. The Sonos desktop app worked fine on the old iMac but on the new MacBook we continually get this message:The Sonos iPhone app and web app both work fine and the MacBook is connected to the same wi-fi network.Have spent nearly two hours on the phone to Sonos support and tried the following:Deleting app and downloading it again Toggling firewall on and “allowing incoming connections” Allowing Sonos app access in Privacy & Security → AccessibilitySupport drew a blank, said everything was seemingly running as normal at the backend (the web app and phone app are working normally) and suggested “we get the MacBook checked by Apple” and that there might be a 3rd party app blocking connections - given it is new I can’t see what app would be doing this.Has anybody else had the same issue or can suggest a solution? Something somewhere is blocking the Sonos app connecting but it is mystifying as t

new EE hub does not see sonos S1 port

Who can tell me if and when we can expect new app software update to finally solve this error 913. Main reason I bought Sonos hardware is to use this fuction and this error, sh** software patch is so frustrating.  Any help appreciated. Thanks Ben Moderator Note: Modified in accordance with the Community Code of Conduct.

I have a 7-year-old Playbar, two Play 1 surrounds, and a subwoofer connected to a Vizio TV and a relatively new Apple TV box for streaming (pretty sure it’s the non-4k version, probably 4 to 6 months old, and running TVOS 18). The TV audio output is turned off and uses the optical cable to connect to the Sonos Playbar. The Apple TV box is a replacement for an older Apple TV I wanted to use in another room, and has a silver remote that includes a power button, whereas the older remote is the thin black one with no power button. Everything worked fine after upgrading the Apple TV box; my recollection is the Apple remote controlled the Sonos volume right out of the box. Something happened that caused me to reconfigure our setup (I don’t recall what), so I did hard resets on all the Sonos equipment and set it all up from scratch, and following that the volume control on the new Apple Remote would no longer control the Sonos volume. The old Apple Remote DOES control the Sonos volume, so we'

 Unable to accept T&C's in the new app!!! The “accept” button remains gray. Please help me. I cannot use my Sonos and connect to my existence system 

Hello all,Whilst playing the Spotify app on my phone via my Sonos amp I used to be able to turn volume up by just using the volume buttons on my phone. This has now stopped? Is there a way to get this back. The only way I can turn the volume up is now via the Spotify appTIA

It’s now September 2024. I still can’t scan and update my music library which disappeared about four or five months ago. I have read and tried everything suggested without success.Can anyone help? 

I cannot find my sonos playbar after changing to a new wifi router and new password. What am i going to do? Do i need to re-set up again?

Hi all, Do you know if there is an Sonos app to use on the Samsung Watch 7 running on Wear OS?

What is the maximum recommended distance to connect Sonos Outdoor by Sonance and a Sonos Amp, as well as the cable gauge?

What is good playbar who plays wiht sonos play1 ? 

So I have an entirely wireless room setup, consisting of five Sonos speakers. I have a Sonos 5 hardwired to my router and four speakers all connected wirelessly to the same room. I want/need to change one of these speakers to a wired connection, as I’m moving it outside to a new location too far out of reach of my wifi, hence the need for one speaker to be a wired connection. So I’ve moved on of the speakers outside and hardwired it to my router via a (very) long ethernet cable. When I try and run my Sonos system and the ‘room’ it initially pics up this speaker and appears to treat it normally within the five speakers in the room for a few minutes. After that, all other speakers in the room other than this one become unavailable and music only plays through the one newly wired speaker. If I remove the new wired speaker, the other four speakers come back online and available again in the room in the Sonos app. It’s either one or the other, whereas I need all five speakers to play.Any he

Bonjour,J'utilise de temps en temps mon ampli connecté Sonos et sans raison , même en ayant supprimé et retelecharge' l'application Sonos , mon portable met 2 minutes avant de pouvoir se connecter à l'ampli, alors qu'auparavant c'était Immédiat, alors que le portable de ma femme se connecte normalement...?Question : comment se connecter normalement au lieu d'attendre 2 minutes ???Merci d'avance  Moderator Edit: Google Translate- Good morning,I use my Sonos connected amplifier from time to time and for no reason, even having deleted and re-downloaded the Sonos application, my laptop takes 2 minutes before being able to connect to the amplifier, whereas before it was Immediate , while my wife's cell phone connects normally...?Question: how to connect normally instead of waiting 2 minutes???Thanks in advance

Hi,I haven’t used the stereo pair of two Play:5s in my office for a few months.. and when I tried to use it the other day, one of them was “dead” and did not show up in the system.. after a lot of resetting I have it back in the system, but it is in a separate “room”.I have the Play:5 and the Sub-Mini in “Office” and they work fine, and then I have a separate “Office” with the Play:5 in it.. so I can’t stereo pair them.There seems to be no way of moving the second speaker into the same room, or remove it from its current room, etc.. merge rooms, or anything else.I have current iOS and Android phones.. the Android version of the app seems to be working a little bit better.Any advice?Thanks in advance.

Hello. A few days ago, I set up my Sonos Beam with Sonos Ones as the rear speakers before I got my new TV. The sound was great. I got a new LG QNED TV (55QNED85UQA), and went through the setups. The TV recognized the Sonos Beam. Now, whenever I switch from one app to another (YouTube, AppleTV, Netflix, etc), the volume is drastically different from one app to another. The sound difference is extreme.I have another LG TV with a Sonos Arc and I do not experience this.Can someone recommend a setting change that might fix this? There aren’t many settings in the Sonos app, so I’m assuming it’s a TV setting.

Hi all,just discovered tonight my LG tv remote was no more controlling the volume on my arc… resync it on lg tv, restarted arc, inactivate lg sync stuff nothing solve it. Thought it was related to my surround (symphonisk) because no more distance option in sonos app, so unpair/repair them no changes. Btw the function vocal improvements (not sure about translation) is also not working anymore…any help from someone facing the same issues?thanksarnaud

Haven’t used the Sonos app since may. Just tried to redo everything on my app and still doesn’t work well. Thanks for the garbage.  I will be returning to Costco  

Hello Sonos, After upgrading from the old SONOS APP to the new SONOS APP (May 7th), the APP dont run on Android (XIAOMI). I try to remove and re-add, and the APP stays freeze, I can only see “SONOS”.If I try with another android Samsung, the SONOS APP works, I can we the same SONOS first screen, but will change to a video and ask to login.