What to get

Need help with a speaker strategy. I am moving into a new apartment and am not sure what my setup should be I currently have 1 play 5 1st gen 1 play 3 1 play 1 I'm open to buying another speaker to pair, prob either a play 1 or play 5 I've attached a floorplan My initial thought is two play 1's on the tv stand - paired a play 5 in the kitchen in the same zone as the 1's and then the play 3 in my bedroom any thoughts/ideas on this? would the paired 1's and a 5 work well together and basically give me good coverage in the living room and kitchen? also, the furniture in the floorplan is not my actual furniture, just the company's ad floorplan. open to any suggestions, thanks

Can I play steamed music, eg Spotify, through my Yamaha receiver on to my P:5 using the party function when the P5 isn't wired? The receiver can see the p5 is there as zone 2 but the Sonos doesn't pick the music up

Hello, can you all please help me with best setup given my existing components? I am either going to get another Play 5 for a 2 x Play 5 plus Sub setup... or, get 2 x Play 1 for a 1 x Play 5, 2 x Play 1 plus Sub setup... It's very hard to figure out which to do! I am more concerned with quality music sound than any sort of surround sound set up. Please help!!

Greetings! Complete newbie here looking for some guidance. If I lay out my initial needs, can you point me in the right direction? Firstly, my wife bought me a Crosley turntable for my birthday. I have no existing speakers, and up until this point, the extent of my music listening experience has been through the Pandora app on my Smart TV, or iTunes on my cheap little Bluetooth speaker. I know, I know, but we all have to start somewhere, right? Anyway, I bought a phono preamp for my turntable, so now I just need to figure out my set-up. The turntable will most probably reside in my home office, which is upstairs away from the rest of the house. I say “probably” because that’s where I’ll get the most use out of it for now, but it’s possible that eventually I’ll want to move it downstairs once my kids get older, and my wife figures out our furniture needs (we only recently moved in to this house, and we don’t have much). So, the obvious choice appears to be to purchase a P

I'm in the process of buying a Pro-Ject Essential II Digital turntable and I was wondering which Sonos I will need to buy to make it work? Will it work with Play 1 or 3? Can someone help with this query? Thanks!

I am in a dilemma! I would like to use a mini system to my Sonos Connect and Play 1's. But nobody will recommend something compatible. I understand it isn't good to recommend other companies products but I would like to play CD and my USB turntable through the same system to my Sonos! Can anyone recommend a medium priced CD mini unit and with what it requires the specification requirements needed to connect wirelessly to my Sonos please? Like (0) Quote More

Hi all. Just completed building my workshop and need to get Sonos in there, however I'm concerned about the temperature issues. Not sure which Play device would best cope with the cold weather or if a connect amp would be better. Worshop is insulated and plywood lined but insulation is minimal. Any help or advice would be appreciated! Regards Dave P.S. Any update on Echo integration Ryan?

Hi! Im building a setup in my parents new house with 8 different zones connected through connect amps. Have some questions hope somene could give me advice: 1) Starting from the facts that 1) CDs are outdated, that everything is in Spotify (or others) and 2) Theres Tune In Radio with the sonos app, my parents still want to be able to play CDs and to hear live FM (and AM ideally) radio with no delays (Tune IN radio adds some seconds or minute). All the setup its going to be centralized in a HUB, so I think I could add a CD/RADIO Tunner connected through the line in to one of the Connect Amps to be able to fulfill their requierements, but is there any good one you can recomend they can still play7pause/next/search frquency remoteley without needing to go to the hub (instead for introducing a CD in the player). I was thinking some that has an app to control through IOS or Android through the home WIFI network. 2) Any advice for the In-cealing speakers? I need some mono and some

Hello. I currently have a Playbar connected to my Panasonic 55" plasma TV. I'm looking to accomplish a couple of things here: 1) Create a 5.1 home theater setup using my existing Playbar. The ideal solution would include in-wall speakers and a non-Sonos sub. Is this possible with the Playbar, in-wall speakers, a Connect, a Yamaha RX-V679BL 7.2 receiver, and a sub? 2) I want to add speakers to my deck/patio as a separate zone. I want to do so utilizing the same receiver mentioned above as well as (I'm assuming) another Connect. Is this possible? Thanks for any help you can provide!

A few months ago I purchased the Playbar and just bought the sub last week. Very happy with both but am now looking to add two speakers for TV viewing as well as listening to music. This is for our basement which is about 450 square feet, so not very big. I've read lots of input and reviews for the Play 1 and Play 3 as well as the Play 5 speakers. I was set on the Play 3 but it doesn't seem to get as much love as the Play 1 for adding to a Playbar and Sub. Since I have the Sub already, I'm thinking the Play 5 wouldn't be necessary. I don't mind spending the extra $200 for a pair of Play 3's over the Play 1's if it is truly worth the extra money. If you had a Playbar and a Sub - what two speakers would you add ? Thank you, Gary

Will the Sonos Playbar support Dolby 5.1 with my new Sony X930D 55" television? I see some people say it will not but also that Sony released a firmware to allow Dolby 5.1 pass through via optical out. Would that give me 5.1 through the Playbar? I will be connecting only a Fire TV and PS4 to the television. My primary television watching is done through Netflix, Sling TV, Playstation Vue, and Kodi. I will not be hooking up a blu-ray player so no DTS shouldn't be an issue. Thanks!

I want to replace part of my B&O installation with Sonos equipment. The current setup is the following: BEOCENTER 3 as a central Hub. Connected (on the "in-side") to this are : Satellite decoder ; Telenet Decoder ; Radio/CD player ; DVD Player. on the "out-side") a Panasonic TV Plasma operated only as a screen ; 1 B&O Subwoofer Beolab 2 ; 4 B&O speakers Beolab 8000 (Front Left and Right - Back Left and Right) ; 1 Central Front speaker B&O Beolab 3. I want to replace the sound part with SONOS ( Playbar ; Sub and 2 Play s 1,3 or 5's). Can anyone advise on if this is possible and how? Thnx in advance.

I've just won a Connect (ZP90) on eBay and want to use it to add Sonos to my bathoom (6'5" x 5'9" , 1.96m x 1.75m). I don't have much experience with audio tech so just looking for some advice on what to buy. I'm looking for fairly decent sound quality, though I'm not an audiophile, and good volume but it's only a small room. Amp: Am I right in thinking I need to buy an amp to power the speakers? If so, does price matter or would something like this be fine: http://amzn.to/2kJENgs (I'm planning on putting it all in the loft above the bathroom) Speakers: I'd be willing to go up to £100 or so but not sure if I need to spend that much, does stereo really matter for a bathroom or could I just get one speaker? Is there a specific stat I should be looking at? e.g. watts, ohms, amps etc? All advice welcome, thanks 😳

Hello All, I'm fairly new to the home entertainment system so I am looking for some advice on what is the best product to get that will suit my needs. I am hoping to install some (not yet looked into) internal ceiling speakers throughout my home, bathroom bedrooms living rooms etc. I am hoping there is something available that can connect either (wired or wireless) to all devices (phones, tablets and also TV) so I can play music in separate rooms, but also so I can play the audio of my TV through the ceiling speakers. I am hoping this is then controllable via an app so for instance, I can turn down the volume to my sons room when he plays XBOX! Does anyone know of a system that can achieve this? Any help on what is needed will be great!!

New to Sonos with a Connect:Amp running a couple of ceiling speakers quite nicely. My question concerns a vintage stereo system with very nice JBL Control Monitor speakers and a partially dead NAD 7020 integrated receiver. Is it better to repair/replace the receiver and add a Connect - no amp thereby being able to connect turntable etc. and still use the JBLs ... or junk the receiver and add the Connect:Amp. Looks like for the $150 cost difference in the Connect vs. Connect:Amp, I'm better to keep/fix or replace the receiver. Seems a break even proposition. Will the Connect:Amp be equal to the NAD is powering the JBLs? Am I missing something?

This is for anyone who is planning on buying a Connect! I hope to also cover concerns that you have that I also had before I bought one! I am posting this on Sonos's official website because I have LOTS of good to say about my experience! Why would I post something negative about Sonos here? (this doesn't mean I am biased ;p) TL;DR: It's gr8 and I now use them as my desktop speakers. My Sonos is now WAY more versatile than normal speakers and input delay isn't an issue even though it working through your WiFi. What made me buy a Sonos Connect? Was there any input delay? Was the delay significant in gaming and other applications? Was it easy to setup? I'll answer all of these! First off, I chose to buy a Connect due to the lack of inputs available for my two Sonos Play 1's. I loved the build quality and sound these speakers produced, and found the only way to get a line in was to buy a Sonos Connect. Even though the whole setup cost me almost £600, it was worth it! Setup

Can anyone recommend a wall mount for a Play:5(gen1)?

Hello, I'm building a new home and trying to plan out a whole home audio system based around Sonos, Amazon Echo Dot, Connect Amps, and external speakers. My main goals are to 1) have access to Sonos in most rooms of house, 2) Use Echo Dot, Connect Amp and ceiling speakers to voice control music in kitchen and master bathroom, 3) have 5.1 surround sound using playbar, subwoofer, and ceiling speakers. I would like to lay out my plans and hoping you all can tell me if it will work, how i could improve it, and if i'm missing anything. And of course all smart ass comments to tell me how stupid I am are welcome 1) Kitchen: Amazon echo dot wired to Connect Amp...and Connect amp wired to ceiling speakers in the kitchen. Basically want to be able to say to the Echo Dot to play music off Spotify/Amazon/Sonos. Also, at times I want the option of being able to use my iphone/SONOS App to play music on the kitchen speakers and zone them with other rooms if/when I want to (ie: play a song

I have a pretty nice wired receiver but I need to move to a wireless setup. I'm thinking of buying the Sonos Connect to attach to that receiver/amplifier, but I'm wondering what the point of even holding on to that amplifier/receiver is, considering that Sonos speakers are each independently powered. My understanding is that the receiver would continue to feed the Sonos Connect multiple sources like a record player, optical TV audio, etc. However, the Sonos Connect would not control the wired speakers attached to the receiver, and the receiver's amplifier would basically be a brick. If my understanding is correct, wouldn't I be better off selling my receiver/amplifier and using lining in audio to the Sonos Connect so it can send the music signal to each independently powered speaker? Not quite understanding the role of a receiver/amplifier when all speakers are independently powered.

Hi, I recently purchased two play 1's for my home office and set them up in stereo setting and really appreciate the output. As such, I have contemplated adding more Sonos units to my main living space. The primary purpose for the system is to play Spotify but would be a bonus if it worked as rear speakers if possible with my current TV/ home theater setup. Current Equipment: - Denon AVR-S710W 525-Watt 7.2 Channel 3D Home Theatre Receiver - Mourdant Short (2 wall mounted speakers + 1 centre channel) I am trying to determine if I should: 1) buy a Connect + 2 play 1's and use them as rear speakers for TV and also use them for music + a subwoofer 2) buy a play 5 since its new and use it for music alone and maybe later if new play 3's come out get two and move the play 5 elsewhere 3) In future, I may want to add wall mounted 2 Play 1's in diagonal corners of the dining room as well. Looking for thoughts on this placement as the room is a bit of a hexagon shape. 4) also

I'm wondering if I can use a Sonos Connect:Amp to connect my Roku TV, LP player (currently played through my Roku TV built-in speakers), and two Echo Dots (instead of waiting for the formal 2017 Sonos/Alexa integration) to my two Sonos Play:1 speakers. I use one Dot and one Play:1 in my bathroom and all else in my living room. More specifically, I'm wondering: 1. If all my Dots will play through the Sonos system if only one Dot is plugged in 2. If I can add the built-in Roku TV speakers to my Sonos system, to use as an extra set of speakers while streaming music from non-Roku devices or watching Roku TV 3. If I can connect my Roku TV, LP player, and Echo Dots to the Connect:Amp simultaneously

Any recommendations on two play 1's vs. a play 5 for a kitchen/tv area setup? I am thinking of placing the unit(s) on the 3 foot high shelf ("short bookshelf" in picture) and was leaning to two play 1's for the potential to use as rear speakers for TV setup but that is really secondary and want to ensure nice sounding music fills the tv/kitchen space (vs. just if I am sitting on the couch) and potentially can be heard in dining room as background music so then thought the play 5 may be better at filling that space? So options I am thinking: 1) two play 1's on bookshelf 2) 1 play 5 on bookshelf (I lean towards this) 3) 1 play 5 and subwoofer (but may be too costly for now) 4) 2 play 1's and subwoofer (but may be too costly for now) Any thoughts would be appreciated!

Hi all, I recently bought myself a couple of play 1's to get me started. The plan is to expand over time. I'm happy to listen to streamed music these days but the wife is insisting that we must have a CD player as we already own hundrends of cd's. I'd like to get a sonos set up in the lounge and the choice comes down to 1x play 5 or a pair of play 1's. I know that the play 5 has a line in (to connect existing CD player) but is there any advantage of using a connect over the line in on the play 5? If not I'll just listen to the play 5 and compare with stereo play 1's. Also if I use the line in on a play 5 is there a time delay between the music in different rooms? Thanks

Is there ever any chance that Sonos will work with the amazing Roon?

I'd like to add a Play 1 to my existing home theater system that I have a TV, CD player and 2 video disc players connected to. I'd like to play audio from all devices through the Play 1 and I assume I need a Connect to do so Is that correct? Assuming I do, an issue is: all of my RCA speaker outputs of my RX-V475 are taken by the surround sound speakers. I do have open AV OUT RCA jacks but if I hook the Connect to those jacks, will it transmit any component audio signal playing through the amp to the Play 1? What jacks on the amp should can I run the Connect output to? Thanks in advance.