Speakers

Hello, So I recently purchased a record player with a preamp so that I could play my records through the Sonos speakers that I have. Right now, I have the playbar and sub connect to my tv. How can I connect my record player to play through these speakers? I know the connect and connect:amp would work, but is there a cheaper option that would also work, while not compromising the sound quality?

Is there a max number of speakers for a sonos bridge to connect? I've just bought a single sonos one but when I plug it in there is no identification of the sonos network / bridge. Maybe I have too many speakers / rooms set up? I have a single bridge running a playbar / 2 surround one's and a sub as a single TV room, A 5 in the kitchen, a 3 in the garage and I now want to add a sonos 1 as a bathroom. Am I maxed out on the bridge?

Is it possible to save volume presets/profiles ? I've had a good look around and can't seem to see anything of the sort. Just wondering if I'm missing something. Would be good to be able to save presets ie. dinner party, sunday morning, whole house etc Where as for each defined setting each speaker had a saved volume

New listing on FCC today for Sonos product 'S15' Label is totally square so could be a new connect type device ? Let the speculation begin !

I have a room where i have 4- 8ohm speakers and i want to connect them to a sonos connect amp. What will be the best method to connect them. Thanks

all the system was working fine ..suddenly play 5 stopped working,im able to connect to the speaker can what is playing in the controller but no sound is coming through the speaker.

Is it possible to use the speakers to voice page throughout a building?

Hi Is there a way to pair the sub with 2 group of speakers I have 5.1 surround with playbased and 2x play 1 and a sub I also have a pair of play 5 gen2 which I like to play music on it. The surround sound setup I don't like the sound of it for music, great for movie. I like to setup so the pair of play 5 use the sub when I listen to music and in surround setup when I watch movie

How many sonos sub could you connect a 1 connect amp?

Can i use my samsung tv playbar with sonos connect and 2 play 1's to make home theater surround as 5.0 channel

This has been a long requested feature for years. Why limit the listening experience to music only? I love the sound when pairing two Play Ones. I wanted to keep them, but the fact I couldn't also stream the sound of my movies from my MacBook was a deal breaker. Why would I want to invest hundreds or thousands on a system that's limited to music only. I have a MacBook Pro, and I watch plenty of movies. Why should I have to buy additional speakers from another company just to enjoy movies? No one should have to resort to buying a play5 only to plug it into an airport express through the auxport. No one wants any more wires sticking out of their speakers. Using the auxport defeats the purpose of a wireless solution. Why won't Sonos allow software driver based audio output through their PC/Mac controllers that will allow any app to stream audio. For example, I want to run VLC player or Divx movie player and have the audio stream through the Sonos system. Can we get an ex

Have read the instructions on how the RCA to 3.5mm cable can be used to connect to TV so went and bought one, but for some reason it is not working. No sound at all coming through. I have a Panasonic 4K tv and 2 Play 5's (2nd gen) set up as stereo pair mounted either side of the tv. Any help appreciated.

I just purchased a Play 5 last week. I am completly impressed and am looking forward to buying more components! I seem to have a rattle sound when songs or voices with more bass are playing. It is quite noticable and I am certain there is a fix for this. So, what would the fix be??

Hi All, I am a new Sonos owner very happy with my Playbar + Sub combination in room that is 20 feet x 15 feet. I would like to add more speakers to output music that is already being played on the Sonos from my phone. If they can also work as surrounds then that is good too :) I've narrowed my choices to three - (1) Connect my existing Focal Little Bird (two speakers + integrated amp/subwoofer) to the Playbar + Sub combo using a Connect (2) Connect my old Bose Acoustimass cube speakers (I have 5 can connect up to 4 I think) to the Playbar + Sub using a connect: Amp (3) buy a pair of Play 1 / 3 to connect with the Playbar + Sub I would like to evaluate these choices in terms of the below: (a) are combinations (1) and (2) possible i.e. will a connect work with the Focal (as it already an amp) and a connect:amp with the Bose cube speakers? (b) can the Bose cube speakers work properly in combination (2

I am trying to decide if it is appropriate to house a Sonos connect outside and if so if there is a weatherproof case available.

My sonos keeps switching to rooms currently hidden

We installed your (6) Play:3 and used a bridge (ethernet) to connect it to a cable box rca. The problem that we are having is that unless the system is set to compressed, it crackles in and out. We have tried every channel option, put the line level to the highest, made sure drivers were updated. We are using a Ubiquiti LR PRO APs for our wifi system. Your confirmation number is: 7262290.

I have a Sonos Connect that is connected to my surround speakers in my living room. In my office I have 1 Play 1 and in my kitchen I have 2 play 1 speakers set up for stereo. All is set up in a single group and it have worked like a charm until a few days ago. Now I have delays of approximately 2 seconds between the speakers in each room. I have tried to look around for a solution, but have not been able to finde anything similar my setup. All speakers are running wireless except the Connect that is wired.

Hi! I'm new to this and am building a house. My plan is to have speakers around the whole house and was wondering if there was a limit to how many subs can be grouped together with everything else? I would like to have one in the rumpus room and another in the kitchen area

I have my Sky Q connected to my Playbar using HDMI in and Optical out through my Samsung Smart TV. The sound quality is poor, very tinny. I find if I set Sky Q to Dolby some channels have no sound at all, so I have to set it to Normal. My TV audio is set to PCM. I don't have a Sonos sub, and I am finding I have to set the bass to maximum to get any depth at all to the sound. I also have two Play 1s set up for surround sound but when using Sky Q I hardly hear anything through them, just the occasional almost undetectable sound. Playing music through the system is fine, and playing Netflix on my TV through the Sonos system is fine as well. it's just Sky Q. When I switch to Spotify or Netfix from my Smart TV the volume blasts out all of a sudden, the Sky output volume is extremely low. I don't want to connect Sky Q audio optical out directly to the Playbar as then the playbar won't receive any other audio source from the Smart TV, e.g. Netflix, Amazon Video,

Hi there. New to Sonos here. I am trying out a Play1 for the first time and enjoy it for the most part. But I am having an issue with the volume randomly turning up to a very loud state. There is no one else using the app to control the volume (which was my first thought). Does any one have any ideas on this?

I have a continuous flashing red play/pause button on my play3, it remains blinking red even after factory reset. What could be the problem? Playback works fine...

I have Sonos Play 5 that is wired and Play 1 that uses Wifi. Spotify is skipping songs. Sometimes every song skips, and sometimes one, two songs play fine until next song skips after 30s - 2 minutes. I have tried to change wifi channels but the problem still continues on 1, 6 and 11. I have a 50 mbit internet connection and Airport extreme AC router.  I have sent a diagnostics report with number 3956286.

If I buy a wireless bluetooth vinyl player can i stream that straight to my sonos set up?

Hello! I have 3 rooms grouped together. In one of the rooms (Play:1, The toilet), I loose power to my Sonos every time I turn off the lights. I was hoping it would start playing again once lights were turned on but I can`t find anything about "autoplay" or similar in options. Obviously I have to group this room up again with the others every time the lights has been turned off and its kinda...irritating--:rolleyes: ...espescially on beer-nights where this light goes on and of quite often... If this isnt gonna work out as I planned Im afraid I bought one Sonos too many, since I never play music "in-here-only". I just wanted the feeling that my whole house was full of music all the time(: Any tips is much appreciated, thank you