Spaces & Setups

Hi Sonos It would be really nice if you can reverse the queue, because of the following reason. When I add a Spotify playlist (which I update weekly) to the queue, all my recent added songs end up at the bottom of the queue. So if I want to listen the recent added songs (let's say 5) I have to scroll all the way down (it contains 500+ songs) to listen to them. And after the 5 songs, the queue reached the end and the music stops. In short: reverse the queue so I can listen "back in time" This would be awesome! (and max 5 story point when it comes to Scrum ;-) Looking forward to the next release! Cheers, Wouter

Hi, I'm looking to replace my existing swimming pool amp with a sonos amp. As of today i have been unable to find any operating ratings for the sonos amp. Andy advice would be appreciated and if there's a good way to reduce humidity can you please advise?

I have a beam and sub, sky q, Panasonic dvd and tv (TX L37ET5B) and have just added a pair of play 1’s to get surround. No matter what I do I cannot get either the sky q or dvd to play anything but stereo. All settings are as they should be for it to work but for some reason….nothing. If I put the sky q to Dolby I get no sound at all, on “normal” just stereo. I have both the dvd and sky connected through hdmi and beam through optical from the tv. The Panasonic tv is in “hotel” mode. I’ve read all I can but frankly don’t know what else to try. If I use Netflix through the tv, get full 5.1 which makes it all the more frustrating! Any help much appreciated as always

HELP!!  Can someone tell me why the app will not let me add a speaker.  I have the Sonos app for Androids loaded on my Samsung.  I want to add a new Sonos speaker to my current setup.  Have gone into the app> System>  but the “Add Product” is grayed out so can not add anything. I’ve even un-installed and re-installed  the controller app.  Still not showing up to add a speaker.Feeling really stupid here.  I am pretty good with computers/apps but can’t figure out why I can not simply add a single Sonos (sonos one) speaker.  It shouldn’t be this hard.  Feeling like I should have NEVER invested the $$$ in this system.  Anyone have any idea why the app is not letting me add a speaker to my current system

I really want to hear my vinyl through my Bose wireless  headphones. My speaker system is all SONOS products with Connect:Amp to link Rega Planner Plus 1. Is this possible?

Ok, this is question that has appear regularly in the forum ever since I first started using sonos. Search the forum for ‘greyed out’ and it comes up over and over with the same problem in various guises, but in all those I’ve never seen a satisfactory answer.I’ve got an iPad 4 running iOS 10.3.3, yes I know it’s ancient, it must be all of 6 years old (Apple discontinued the 4 back in Oct 2014) so by Apple standards it’s a museum piece. Apple make a lot of money by bring out new H/W and persuading users to land fill ‘old’ devices. iOS 10.3.3 is the last upgrade available for iPad 4’s.So yes I know there may be new apps and functionality I can’t have because my iPad is not supported (apple blur the distinction between ‘out of support’ and ‘not supported’).  However I’m happy with my iPad, it does, or at least did do, all i need and more. I neither want, or currently, need a new iPad.So why, when I was forced to install a sonos update, did it grey out some functionality, i.e. from my per

Hi there is there any way to use a symfonisk as a center speaker in a Sonos surround environment i use a Playbar and as rearspeakers two play3si want more richer and direct sound from the front an already have a symfonisk above the tvbest regards clem

I have a BenQ W1070 projector from roughly 5 years ago and have wanted to buy into the Sonos ecosystem for forever!  I finally splurged a few days ago and got a Port (to attach in my Yamaha YAS-203 soundbar), 2 play ones, and two play fives in an effort to massively upgrade my sound system.  I was previously splitting off the sound from the HDMI and wiring that to the sound bar via an optical cable.  Incidentally, I'm an electrical engineer by trade.Guys, I was blown away to find out how much trouble I'm going to have to go through to be able to get 5.1 surround sound working with the Sonos ecosystem.  I'm stunned!!  I don't understand the business strategy, to me it seems like the millennials who are low tech enough to, lol, want to wire in a turn table to their Sonos system, won't make enough money in life to afford a Sonos system!  I'm not necessarily even saying I want Sonos to play DD+ through the speakers because I understand the hardware issues involved, but at least inherently

Can't find the new FM Channel i Denmark, on TuneIn ?

Two questions on the trade in program. Can the discount be applied to bundles also?can the discount coupon be used at any certified Sonos seller or do we have to purchase from Sonos? thanks,Mike

Does audio only play from the Sonos app?

I am aware that the new SL can be paired with a Sonos One but I have an older generation 1. Can the One gen 1 make a stereo pair with an SL?

Hello all,I've had my a Sonos system for over 10 years and I love it.  My wife and I recently relocated and bought a new home.  Unfortunately, the new house is wired with a Legrand On Q system.  The Legrand system is just ok, barely.  The Legrand system sounds pretty poor compared to Sonos.  Legrand also offers far fewer streaming options compared to Sonos  The structured cabling tech who installed my system for the builder was here today explaining the Legrand system to me.  He didn’t know of a way to hook my media server to the Legrand system, or how I might incorporate my existing Sonos.I’m thinking the Legrand will be ok for listening to music in the kitchen and living room, but I’d like to have my Sonos system in my media room where I can play files from my media server through my McIntosh amp.  I have a set of smaller Sonus Faber speakers hooked to the Mc and they could definitely be helped by my Sonos sub.  Here’s the Sonos equipment I own:BridgeConnectConnect ampSonos SubPlay 5

The Sonos instructions to use the Apple TV 4th Generation remote to control volume on the PLAYBAR don't seem to work with the new 4K 5th Generation Apple TV. Has anyone gotten the remote to work to control the volume on the PLAYBAR (without ALSO turning up the volume on the TV itself)??

Hi there,I’ve seen this topic popping on and off since a while now but still did not manage to figure out a solution for my particular case.What I have:2 x rooms, each with a Sonos Connect that then in turn goes to an existing 5.1 sound systemWhat I’m trying to achieve:Play laptop sound (not just songs..but for example also iTunes content or VLC movies sound) over the Sonos connect in a certain room So far I’ve seen:some Sonos speakers have Airplay..not the Connect => not sure if something would be possible here an app Airfoil → should normally see speakers..in my case the Sonos Connect was not visible in it (not sure it is supported though)And I’ve reached a dead-end :)Do I have anything else that I can explore or try out?

Recently hooked up 2 Sonos One SL’s to my Beam as a surround pair however i’m not receiving any sound.After doing some research it seems as though since my audio on my Samsung smart TV outputs as PCM with no option for Dolby Digital, surround will not work with the One SL’s. Has anyone else run into this issue? Are there solutions to fix the PCM to Dolby Digital issue?

Seriously half tempted to return the sonos system back after finding out today there is no power off option on a 2000$ system "let alone no remote forcing you to use a phone or tablet to adjust any settings". Having it on cost money as anything requiring power does! The system is staying on for hours with nothing connected to it. There is no reasonable explanation why there should not be and adjustable auto off option or even power off option this far in todays technolog. For the price this is an unexceptable oversight! Over all not happy with a 2000$ system that should have basic features. I mean with that mentality we should just leave our car running because we "may"... need to use it in the next hour!

Hi, I have a Sonos Connect and 3 Play:1s. The Play:1s are working fine but the Connect keeps disappearing (from Android and Mac apps). If sound is playing through it that stops too. Sometimes it comes back by itself after a while. If not then usually rebooting (remove power cable, wait 5s, reinsert power cable) gets it working again for a while although not always. When it’s playing up I also sometimes hear a click through the amp/speakers that it is connected to - the kind of noise you get when you turn something on without turning your amp off. That makes me think it could be rebooting itself. I don’t think it’s a network issue - it is connected with an Ethernet cable to a TP Link Deco in the same room as the master deco, and even when the Connect is playing up I can still ping the Deco that it is connected to from my Mac or the phone with the Sonos app that the Connect has disappeared from. It got to the stage a couple of weeks ago where it wasn’t connecting at all. I also tried res

Recently installed fiber connection. App not recognizing fiber WiFi!!  BUT, 2 of 3 speakers play!  When it does show up, it says I don’t have any registered speakers!  Can’t add 3rd speaker!  Reset all speakers!  I’m sure it’s operator error, but I’m getting really disturbed!

Hi all,For the past few years, I’ve been listening to my two Play:5s (gen. 1), paired together. Connected via an audio cable from my TV to the line-in port, I’ve been enjoying their sound for movies as well.Apparently, I’ve been so vocally fond of them, that I got a Playbar as a gift for my birthday recently.Now, I’m trying to figure out what the best way to utilise the three products is - of course, hoping that it’ll be an upgrade to my experience so far.I love how all three sound when listening to music! I find that the Playbar does “open-up” the sound of the two 5s in a very satisfying way. Next comes the topic of the sound coming from the TV.From some of the questions here I learned that I cannot use the two Play:5s for just the front left and right channels, with the Playbar as the center. I can, however, group them, so that they play together. In this way I might not get great left-right separation, but I would still enjoy the contribution of the low-frequency richness of the 5s

Good day, I currently own the PLAY:5 (1st generation) and recently bought a pair of KEF LSX which I have upgraded the FW to support Airplay 2. My plan is to buy an additional Sonos One and group it with the PLAY:5 to bring Airplay 2 to both speakers. Then in step 2, group the KEF LSX and both Sonos speakers via Airplay 2. Objective being to play music on KEF LSX, PLAY:5 and Sonos One at the same time. Has anyone tried something similar and can share whether this would indeed work? If so, can you use the voice control while remaining grouped over the brands to change songs and receive the Alexa output?

Been trying to connect speakers all day as unplugged one last night and not working.  There is no settings or menu on the app and wondering if anyone else has same problem?

I have a playbar and two play:1’s. A few weeks ago I picked up the Ikea Symfonisk remote and it worked perfectly with my setup. Last night, my internet went out and my symfonisk remote wasn’t working. I went to set it up again and completed the setup succesfully through the ikea smart home app. However, the app still does not recognize my remote as a device. After successfully setting it up, the remote still doesn’t work and does not appear on the list of devices. I’ve tried disconnecting my account from the app, and also re- set up the ikea hub and the problem persists.

How do I remove devices (speakers, boost, etc) from my account if I plan to sell them?

I already have a sonos move and it sounds amazing. I was wandering if I should I another $400 Sonos Move to make a stereo pair?