Show off your setup or get inspired by others
Recently active
Hello! I recently purchased a set that included Arc, Sub (Gen 3), One SL (Pair), but I’m now realizing that I will not be able to use all the components together due to the layout of the room and placement of the TV. As we figure out what to do, I’m hoping that a Sonos savant on here could answer the following:can I use the Arc as the rear speaker (behind where we sit while watching TV) and the pair of Ones as the front speakers (next to the tv) I have the option of hanging the Arc above the TV but it will be a few inches from the ceiling. I’ve read this is a bad idea. True? If I decide to not use the Arc, is it possible to just pair the Ones with the sub?Thanks for your thoughts!
Recommendation for a dedicated Sonos remote: My favorite CR200 is dying, dead spots on screen and probably not worth buying a used one. I want to find a device (small) to use as a dedicated remote, I play mostly from Amazon and do have a small favorite list, also play a lot from the SonosTube app. Don’t have a smartphone I could use for this and don’t want to use my iPad pro as well (too big to carry around 12.9). Looking for maybe an Android based OS hopefully can use as a remote, what I don’t know is minimum version of android I would need. iPhone too expensive just to buy and use as a dedicated remote, recommended please.
I’m considering whether Sonos amp will be the correct solution for my setup. I have playbar and sub in my living room. I also have in ceiling surround speakers that I would like to use rather than my play 1’s. I also have in ceiling speakers on my patio. I have a selector switch in the wall to toggle between the indoor and outdoor ceiling speakers. Is it possible to setup Sonos amp so that I can use the living room ceiling speakers as surround when watching tv, but disconnect from home theater and operate as stereo pair when I only want to listen to music outside on my patio without having all of the theater speakers on inside?
“Best way”, not “desk way”! can't see how to edit that so….Hi there,After some setup advice.I bought I record player, which I connect via a pre-amp to a Sonos AMP.I don't have any speakers attached to the amp. I group it with my Arc + L/R ones and Sub for the sound.This is working ok, but the base levels from the vinyl is nowhere near as meaty as my TV / digital music sound.I like some healthy base, but I don’t want to keep turning it up/down every time I move from the deck to TV etc.I’d also be interested if there is a smarter way to group or set this all up.Any thoughts welcome (but I'd like to avoid buying anything else!)
I have an arc, with a sub bonded. Works fine via WiFi. I added an Amp, also on WiFi and tried to bond it as surrounds to the arc via WiFi. It would not work after many attempts to bind as surrounds.The amp is less than 8 feet away from the arc. (Note that I had two OneSL used as surrounds via WiFi with the arc and it worked fine but I need to use the in ceiling speakers )Then I wired the amp, not the arc. I was able to get it to bond, with a warning that the arc should also be wired, but I ignored it and it successfully bonded. However there seemed to be little to no sound coming from the amp speakers. (This might be a bug I imagine - or the warning is really an error outright that should stop the binding. )So I then wired the arc and the sub too, then rebonded the amp as a surround. Now all is working , but everything is wired ( I disabled WiFi on amp, sub and arc after it all worked wired to try to avoid stp problems in my network which is Ubiquiti ). I would really prefer not
Hi there, I have a Sonos Beam connected to my TV and a Move. When streaming music via the sonos app or via Spotify, all works fine. I can pair the two speakers and play music with great quality. However I have an issue when the Beam streams audio from the TV input (HDMI) to the Move. So if I am playing music on my TV (i.e. YouTube), and then group the Move and Beam together, the audio is perfect on the Beam, but it breaks up regularly (every 2-3 seconds) on the Move. I have tried resetting both but still get the issue. And it happens across the various sources on the TV. Any ideas? Thanks for your help.
I am struggling mightily to figure out how to get audio to my new home theatre setup. My old setup worked perfectly. I hardline connected an old Gen appletv to the playbar via digital optical. The playbar grouped wirelessly with my play 1 speakers and my sub. I hardline connected my Apple TV to my hdmi wireless transmitter which sent the video image up to my projector. The issue with my new setup is that the new appletv does not include digital optical. So I do not know how to get sound to run through my Sonos speakers. I upgraded to the new Apple TV because I’m using YouTube tv streaming service. Do you have any solutions to this problem? Video Source -AppleTV 4k Audio Sonos PLAYBAR Play 1 (left)Play 1 (rightSub Wireless Video ConnectionNyrius Aries Home HDMI Digital Wireless Transmitter & Receiver ProjectorBenQ HT2050a projector mounted to the ceiling Streaming Service YouTube TV Thank you,Loel
Although pCloud storage can be accessed via an SMB connection to a local machine that has pCloud support installed, it would be useful to remove the necessity of having that extra machine. Would pCloud people have to provide such a piece? If so, would this automatically allow content to be scanned and available as part of the Music Library? I presume so, but just checking.
I see a number of people who ask basically the same question. With the myriad of updates we’ve gotten, the dev team at Sonos can’t figure out how to add a sort option to the playlists? This seems so plebian and basic, it’s difficult to understand why it still hasn’t been done. Leads me to believe they give us this “community” and then pay zero attention to it. Oh, and yesterday I tried to search within my playlist for a song and it went out into Apple Music and wasn’t even remotely what I wanted to do. I wonder if anyone on the Sonos dev team actually uses the app?
I’m have a problem with a Sonos ARC, it disconnects from the Sub and Surrounds when the audio input becomes active (TV, BD Player turned on). It will reconnect to the Sub and Surrounds after all Sonos components are power cycled. It will stay connected to the Sub and Surrounds as long as the audio input stays active, but if the audio input becomes inactive and then active again it disconnects from the Sub and Surrounds. It does not matter if I use eArc or the optical audio from my TV or directly from a BD player. The only thing that seams to fix the problem is to wire all the Sonos components together. But it’s not an RF interference problem because once I get the ARC, Sub and Surround to work when the TV is on, they keep working until the TV is turned off and then back on. I didn’t have a problem a month ago but there was a firmware upgrade I think broke the system. My setup has to be wireless to separate the surrounds. Does anyone have a fix?
Any updates on bringing back the dates field to Stitcher podcasts? Removing the date field has made listening to podcasts un-usable to me. I’m really hoping this gets resolved. The date field was incredibly useful.
Roam needs a software option to NOT turn on automatically when it senses a SONOS system. If unplugged and being used within the home, it is constantly draining the devices battery which negates the entire purpose (and name) of this “mobile” speaker. Can anyone @ SONOS speak to software updates in the works that address this issue?
i have an arc and 2 one sl for rear i also have 2 stereo pair ones on the front i was wondering if it can be added to the arc as in guess 7.1 i was told is not available but would it be some day as a software update? as of now i use it as sync but the volume is only through the app so it can be at the same level if use it through the tv only the arc and surrounds functions is there any setup to control them synced through the tv remote as the arc and its surrounds?
I have a 5 year old macbook pro, the speakers are bad.I bought Wonderboom that I connect via bluetooth to improve the sound and it works ok but the Wonderboom disconnects freqently.I’m looking for better system and bought a small Bose. I need to delete and recreate the bluetooth connection every time I turn it on. It’s too much hastle for daily use.I looked at the B&O A1 which is expensive and big but would be a nice, quality speaker.I thought the Sonos would be a good choice but discussions here suggest otherwise. I have an iphone and several macs that I would use it with, it would be nice if I could easily use either the iphone or mac depending no need. I
i have a sonos beam. want to add two speakers for left and right stereo. what speakers to use and how do they connect to the beam??
Hello I guess I found a new software issue with the LG C1 in relation to the Sonos Playbar. Let me explain:At first, I’ve set the Sonos Playbar up to work with the LG C1, by following the instructions. Also, I used the Sonos App to connect my LG Magic Remote with the Playbar. So far so good.The problem is, that each time I turn the TV off, the connection between the LG Magic Remote and the Playbar disappears. For example: If I try to turn the volume up, a “Mute” symbol appears on my LG C1. Also at this moment, the Playbar doesn’t react to the Magic Remote anymore. The only way, I can make it work again, is by going to the TV settings and when I click on “Sound” I change the settings from “Optical out” to “TV Speakers” and then back to “Optical Out”. Suddenly, I can turn the volume up and down again, but only for this “Session”until I turn the TV off again. I’ve conacted Sonos and LG support yesterday. They both took notes of this issue, but apparently, I am the first one who is having
Please add DatPiff.com mixtapes as a streaming service.
So.. I have a turntable that I’d like to add to my Sonos system so I can listen to vinyl throughout the house. I have a pre amp too which could be used if necessary. What Sonos bit of kit do I now need please? Port? Amp? Many thanks in advance ajlj
Hi, Setup: TV connected to Arc + 2x Sonos 1 + Sub I compared the sound via Spotify app on TV V.S. Spotify Sonos app. I noticed a huge difference. Spotify app on TV: more bass, vocal is majorly coming from Arc Spotify Sonos app: bass is more balance, vocal is from surrounding sound (2x Sonos 1) I set the music playback = Full in Sonos app. The TV is outputting PCM while streaming Spotify app, but I believe the Spotify Sonos is using PCM too.I personally prefer the sound using Spotify Sonos app. So, it is a bit annoying that I have to switch to my phone every time I listen to Spotify. Anyone knows why there is a huge difference of sound experience? Thanks
Sonos team- I’ve seen countless threads in the community over the last year of how this Snooze feature does not work. It’s clear this is a big, and as a software engineer, I can tell you this is probably the simplest bug to fix. I’m sure you have other items in the backlog, but why has this simple feature not been addressed in over a year?!?! It’s clear the community wants it, and it’s clear this is a major value proposition of the Sonos One SL. please reply to my post as you have not replied to anyone who is facing the same challenge. This is an awful user experience, and as a public company I expect that you address customer issues in a more customer centric way by READING THE COMMUNITY BLOG AND ACTING ON IT Thank you
My Tivo Edge remote (attached to a LG OLED55G1PUA) is programmed using a Denon code (no Sonos codes are listed on Tivo). Having followed the Sonos pairing instructions, the MUTE button functions on the Tivo remote and but not the volume up or down. Any suggestions? Thanks.
HiI currently have two Play:1’s in my living room that are paired for music. I like the idea of getting a Playbase and using them as a home theatre setup (I know it is discontinued, but I can still find them online). I’m using the S1 app.Some questions if I may -If i pair them as rear speakers with the playbase, can I still use them as general speakers for music through the app (as I do now with the paired Play:1’s) Presume in use, I turn on the TV and then the Sonos and they then work together? when I turn off the TV I then also turn off the Sonos?Anything to watch out for?ThanksMark
Cannot connect my speakers because Sonos told me I’m in beta.
With Sonos not supporting anything other than the insecure/outdated SMB1, I feel like my love affair with Sonos has finally come to an end. After 10+ years, 10+ sonos players, and growing frustration I think Sonos doesn’t want my use-case as a user anymore. What other brands of multi-room speakers out there are worth investigating that can:• Play from my NAS (with up to date security credentials)• Not have a 64k track limit I don’t care about being able to talk to my speaker, I don’t care about streaming, I just want to listen to my personal music collection, on a network which is secure and not have to worry if I add another album that I will have to remove another from the library as it won’t fit.
hello, i am going to be purchasing In-Ceiling Speaker and Sonos AmpWhat is the max / preferred wire gauge?Thanks
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.