Show off your setup or get inspired by others
Recently active
Hi all. I have purchased the Sonos Arc and Sub, and now I bought the Sonos IKEA Symfonisk Picture Frame. However, aesthetically I don't think I want two Symfonisks, but rather would like to use one Symfonisk and one Sonos One SL for surround speakers.Is this possible? And if yes, is it recommended? Or would it be preferable to use two of the same speakers for surround sound?
HiAfter the recent update I have tried to play Atmos music on my Arc. Searching for ‘Dolby Atmos’ on Amazon music via the sonos app on my iphone I get no results. If I do the same on the Amazon Music app I get a playlist ‘Best of Dolby Atmos’. Even if i specifically search via the Sonos app for a playlist ‘Best of Dolby Atmos’ i get no results. Can anyone help please?
Hello all,I’m probably over looking something but I could use some help. I’m trying to get the line-in (touch tunes jukebox) to turn off after the song ends automatically and switch back to the original music source “apple music”The way it’s working currently is, apple music will play as usual. Then if I go to my touch tunes jukebox to play a song, the song will turn on (in the s1 app, it changes to Receiver:Room 1) (source level is set to 1 - I was having trouble getting it to switch to line in at level 2 (A/V))The problem is after the song from the jukebox stops playing it never switches back, instead it stays set to the Line-In(Receiver:Room1) unless I manually switch source back to apple music.I’m trying to figure out what’s going on. My initial thoughts are either, the system thinks the song is still playing because the source level threshold is set low. Or it’s dropping the apple music connection and isn’t able to switch back.Thanks in advanced for the help! SettingsLine-InSource
This BUG is still present, more than a year after being reported on this forum for the first time.Issue, cause and workaround have been documented in: The problem and workaround were acknowledge by a Sonos rep more than 6 months ago. But the problem persists.Would it be possible for Sonos to actually fix the bug in the next update?
I have an Ethernet wired amp, two Sonos One SLs and a Sonos Sub. The One’s and Sub are connected to my network via WiFi.When I set everything up, I watched the ones and subs go online on my wifi network but now my router hasn’t seen those One’s or Subs in months… but everything is working great.I would love an explanation of how the subs & ones work. Do they just proxy their requests via Sonosnet through my wired amp? It’s perplexing to me that they are no longer on my network at all but still functioning well.
Hi.I’m blind and using screen reader talkback on my android phone. Earlier Sonos has worked perfect with talkback and I have used it for many years now. Since version 13.4 Talkback no longer reads my sonos tab. When I activate my sonos tab and try to move between the controls I get “can’t connect to sonos” message. No matter what i Do. If I switch to library, system or search it works perfect and I can listen to music, radio and podcast without any problem. If I turn off talkback and let a sighted person use my sonos tab it works perfect. But with talkback on it only says can’t connect to sonos on that tab. I tried another little older android phone and the same appears on that one too after updating Sonos app to 13.4 and 13.4.1.I hope that can be fixed soon.Best regards Tony
I have an AMP connected to a zone (dining room) and a PORT connected to my DENON AVR-X3700H receiver that I use on the optical CD input. When I use my 2 zones simultaneously (PORT with DENON AVR + AMP), the sound of the DENON comes out a few milliseconds later. I had a KENWOOD amp until a few days ago and I never had this problem. Has anyone had this problem? Can I adjust this parameter in SONOS? I don't see how to do it in DENON
Bonjour, Savez vous si une Mise a jour est prévu sur les Sonos Beam 1ere génération pour lire les piste en DD+ et en AAC 5.1 , comme ce qu’ils ont fait recemment pour le DTS ou va falloir acheter la GEN 2 ?Merci
I am in the process buying a sonos roam Bluetooth speaker. I would like to know if I can connect it via Bluetooth with my Samsung TV? Currently my Marshalls Bluetooth speaker connects and so does the bose speaker. I asked sonos customer care chat and they said no its not possible to connect your TV. If anyone can help out
I have a Sony Bravia Tv. A PS4 and a Sonos beam (and surround).the moment I switch to playing the PS4, no sound comes from my tv. The same things happens with my bell receiver. Any suggestions? What is the proper sound set up for it to work?
I have a Sonos Amp and I’m running S2. Right now I have two sets of wired speakers attached to the amp, but I cannot control them separately. What’s the least expensive way to do that? If I have to by another amp just for one set of the speakers, can I buy a used one and see them in the same app
Help with a simple question i have arc and surrounds and a lgcx tv that has earc which is set up correctly and turned on, in settings ive got digital sound out options with 3 options pcm, auto or pass through my simple question is what should I have it set to, Ive looked all over this forum loads of people have asked the same question but not one answer, loads of answers going around the issue just like a politician would, because I have earc enable does that override all other settings, thank you
I have a Sonos arc connected to a LG c1 TV . All good. I'm trying to play Amazon Atmos music on my Sonos arc from the amazon music app. When I use the app and cast Atmos tagged music it reverts back to hd . It's only when using Amazon music through the Sonos app that it appears to be playing Atmos music , but the Sonos app is poor compared to Amazon music as it doesn't tag Atmos music very well. Why doesn't it play atmos music on the arc through the Amazon app (when in its marked to do so ) I'm using android . What am I doing wrong
Hi everyone,im in the process of doing a family room remodel and want to take the opportunity to have a better HT setup.Some background: I am not an audiophile (appolgies ) I have little kids Something that is simple that works through the TV is my preferable approach (utopia of 1 remote). I really don’t want to have an amp or somehting I need to switch on and play with to watch tvI intend to get a Samsung Frame TV with a Sonos Arc.This was really all I wanted todo, however I have an open concept living area, the family room and kitchen are one large space. There is no wall between the rooms, the couch is the separator.Im concerned about noise from the kitchen impacting the ability to watch tv. I thought maybe having some speakers in the ceiling above the couch may help with the noise transfer and make watching tv more enjoyable and help cancel out some of the noise coming from the kitchen.I see sonos have ceiling mount speakers. Am I able to wire these in and have them work with the
My Connect:Amp was no longer connecting to the app. So, after proceeding through several troubleshooting steps, Sonos guided me to perform a factory reset on the device. When I did, the Connect:Amp came back up flashing the white LED and then went to flashing red Play/Pause. Note that on the Connect:Amp, there is both an LED and a Play/Pause that flash. They are separate lights.
Hi I have read topics on this already but I just wanted to check something. whenever I open my Sonos app (which is quite often) my Sonos roam powers on. I have read about switching it off by holding the button for 5 seconds but it when I do that the blue light comes on to pair it over blue tooth! How do I just stop it coming on all the time?!!!
I’ve read so many threads asking for Jukebox mode so people can add to the queue but not have their song immediately play.Surely there could be a setting to toggle on or off the “play now” option in the app which would mean you could pass your controller around and people can add without the song instantly starting?Are there currently any plans to create a jukebox style mode - it would be good to know the official stance rather than looking at so many threads where the answer from Sonos is “we’ll think about it” and then nothing happens.Has anyone made an easy work around for this for their system so friends can add tracks to the queue?
Decent separate amp/speakers have departed to the party in the sky. Now looking for new option that will play music decently (with occasional party!) in a largish living room, but also keep kids happy with better TV sound. understand need beam for TV (no analogue connector on new LG tv), but do we go 2x1 and sub, or 2x5 instead. if looking for music for occasional party what would work best (old enough that don't need club level volume, but still like a bit of punch). ideally would have spent 1k, rather than 1.5 or more! Don't tell the kids, but music more important than perfect surround sound for TV. we mostly use Spotify.
I have Sonos Connect connected to Sherbourn amp that powers about 14 speakers in my house. Normally when I start music in Sonos app and stream music Sherbourn amp turns on music starts. This morning I turn on music in app, it shows bars indicating music but I don’t get music. The Sherbourn amp doesn’t automatically kick on. I tried turn amp on manually, nothing. Any thoughts?
I have an Arc with surrounds (play:1) in my Living Room, and a One in my open plan kitchen, grouped so I can I play TV sound in the kitchen when cooking etc. and want to mute the kitchen speaker at other times. I have a Harmony Elite remote, and my tv activities include the Living Room (arc+surrounds) and Kitchen speakers. I assign a button on the remote to ‘Mute’ the Kitchen speaker. But it Mutes the arc instead?I have deleted and recreated the activity several times. Then I realised that even in the Sonos app, the muting is not working as it should. It seems it only works If I use a Play:1 in the kitchen, but I’d like Alexa here. Any ideas?
I have always used the desktop app at home and my Music Library has always been linked to a single "Music" folder on an external hard drive. That music folder then has several artist sub-folders and each artist sub-folder then has their own album sub-folders which house the individual song files. I have used the desktop app in this way for years with virtually no problems-until this morning. Now only a couple albums in each artist folder are showing up and some artist folders aren't showing up at all. I've tried various things. Unlinking the "Music" folder entirely then re-linking it. Re-starting the computer. Disconnecting the hard drive then reconnecting it. Checking the app for updates. Nothing works to link the single "Music" folder correctly like in the past. Now, if I link a single artist folder all the albums show up correctly (mostly, more on that later). This works for artists who only had a couple albums show up, or artists who were no longer showing up at all. I could li
What settings do I need to set for the Hd Fury Arcana for the Beam (not gen 2)? I know I need to turn on the Beam setting on the Arcana. What else do I need to change on the settings if any? thankyou
I’m thinking about getting a NAD C700 but want to continue to use my Sonos wireless speaker system throughout my house rather thank a wired speaker or BlueOS wire speaker set-up. Can I run an RCA link from the NAD c700 Pre-Out to the Sonos Port In and be able to stream the music to my sonos wireless speakers? Thanks for the help.
Dear Sonos Community,I have a question related to the delay in “audio from the sub” menu setting in the Sonos iOS app with a Sonos AMP.At 1.04 (18:26) in the video. The “audio from the sub” menu option shows up. I don’t think this is working the way it should? I’m using this setting often to configure the sound and it is very annoying.Please check the video at 1.04:
hi All, When all my speakers are playing the same playlist, I may need to adjust the volume of the playback in one of the rooms. Noticed that when I use the physical control on the speaker to turn up or down the volume, the volume is modified on ALL speakers. This is frustrating, as in some rooms the volume is fine and does not need adjusting. Is there a way to adjust the volume on individual speakers without impacting speakers in other rooms when they all play from the same playlist? Any suggestions will be greatly appreciated! Kenny
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.