Show off your setup or get inspired by others
Recently active
Why everything Sonos releases a new product they NEVER produce enough of the stands. There is a shortage every single time. This is getting really tiresome.
Hi,I’m thinking of buying a Project debut turntable. I have a Sonos amp which is linked to a set of old QUAD speakers. I would like to place the turntable in another spot (the same room) than the amp. Is it possible to link the turntable wireless to the amp? Or does it has to be connected by cable to the amp? Thank you for the advice! regards David
Hi Sonos team,The only way I found to play podcasts with my current service suscriptions is throught TuneIn, which works fine.However, when setting an alarm on my Sonos system, in the source/alarm selection, TuneIn shows/podcasts can be used, but when selecting a specific podcast for the alarm, the “recent episodes” appears, and only a specific existing episode can be selected. This is nice but it feels like a limitation considering the dynamic nature of RSS feeds and their usage.Could there be an option that would select the LATEST episode of a given podcast, and therefore would play dynamically the most recent one even if it hasn’t been published when the alarm was set?Perhaps this can be implemented with another service provider than TuneIn but the limitation seems to be “by design” in the Sonos alarm source selection (one specific song, one specific playlist, one specific episode...)I saw such a request from 3 years ago in the archives but couldn’t spot a suggested solution. Thanks
Here is the setup: cable tv sending HDMI to a splitter, in turn sending HDMI to projector and sending HDMI arc to a sonos amp . Then on the wall where image is projected I have a Sonos ARC . The ideal situation would be that the ARC would act as front sound bar receiving arc signal from the amp in the back wall. This is because I would like to avoid running a long HMDI cable to the ARC soundbar. Is this possible - have not been able to figure if nor how . Ultimately then the speakers connected to the amp could serve as complement to the ARC system as rear surround speakers . Thanks for any help
Hi - thank you in advance for your help. New to this so really looking for the expertise of the group. We are adding a kitchen addition and covered outdoor deck to our home. The electrician suggested 2 Sonos ceiling speakers for each area. He also suggested 2 Sonos receivers (I’m guessing he is referring to the amplifiers?). My questions:does this equipment sound correct? Why would we need 2 receivers? if we purchased just 1 receiver and 4 ceiling speakers, do we have the option of turning the deck ones off if we are not out there? Can we listen to 2 different sources in the 2 different areas at the same time (parents mysic on kitchen, kids music on deck?) can we add additional stand alone Sonos speakers in the future for the living room for example or out in the yard?thank you very much! Very excited about this
At the moment I have to hold the power button down for a few seconds to power it off. Sometimes this doesn’t work and although I don’t let go of the button it thinks I have. So today it took 5 attempts before the speaker powered down.I don’t use the feature where it will shut itself off and go into sleep after being idle for a while because, annoyingly for my use case, it powers itself back up again when I open the Sonos app. This is not what I require because the Roam is only used occassionally in the bathroom. If there was an option to not do this then I would use this method.Given the above, I would like to be able to power off completely using either the app or a voice command. I know I probably need to create a request but I doubt they will do anything if only one person requires it!!
I am adding 2 Era 300 speakers (replacing 2 One SL) to an existing Arc soundbar and Sub Gen 3. Do I have to re-run True Play after connecting the 2 Era speakers?Thank you.
My setup is the following. Xbox series x connected to tv (tcl c935). Sonos arc to earc on tv. 2 Era100 speakers as surround rear left nd right. My problem is, when choosing my sound output on tv to arc I get sound delay, most noticeable when playing fps. When I change my sound output on my tv to pass through the sound from my rear speakers chopps off the sound (silence for 3 ms) here and there. Can someone here explain why and what I should do to get rid of these annoying problems. Best regards
Hi, which of these is better for just music?Sub mini + Beam Gen2 + 2x Era 100 as surround rear speakers. Sub mini + Beam Gen2 + 2x Era 300 as surround rear speakers. 2x Era 300 as stereo pair. 2x Era 100 as stereo pair.At the moment I am using number one from the above list and I am happy with the spatial audio but wondering if option 3 would be as good or better or the same?Also have read that some say 2x Era 100 as a stereo pair is pretty good, but without the spatial audio effect of course.
I was just curious, as I am shopping, if the Era 300 is the latest and greatest, it seems weird that it is less expensive than the Five speaker. Is there a place to compare them? Is it just because the focus is on Spatial on the 300 where the Five is used better for straight up stereo?
hey,so one feature I would love to see is a way to mark songs as “favorite” and a subsequent favorite list of songs, a playlist with all my favorite songs for example.I am referring to all the services outside of Spotify eg Sonos Radio or any other radio station for that matter. Please make this a reality- right now I have to take a screenshot of the song and save it to a dedicated album - it’s a workaround but not a very pleasant one. Thanks!
Hey there.a while back, there had been an announcement for expanded sleep stations:Expanded sleep stations composed and mastered by Mikael Jorgensen of the Grammy Award-winning band Wilco will include Slow Motion Freeway, Waterfall at Dusk, Warm Glow and Midnight Beach (all HD only).I can‘t find them on Sonos Radio. Does anyone know what happened and if or when these stations will become available? Thanks! Source:https://www.gratefulweb.com/articles/radio-curated-hosted-kareem-abdul-jabbar-launches-sonos-radio-today
Hi Here is my current setup. Four Sonos Ceiling Speakers hard wired to an Sonos AMP. A Bluetooth receive Line-In to the Amp. Have my TV connecting to the Bluetooth Receive. From this, I am able to listen to the TV using the Ceiling Speaker. It’s somewhat surrounded. I frankly like it. The problem being the bluetooth connection is not stable. Plus, every-time, I have to manually connect TV to the Bluetooth receiver. The TV is far away from the AMP, connect through cable is just not happening. I’m looking for a better solution to wireless connect TV to the AMP. Would a Sonos sound bar, such as Arc or Beam help? I’ve read something like connect Beam with TV through HTMI and as long as Beam and Amp in the same WIfi, they can play together. Is that true? If so, is this gonna actually add more channels or just making it “sound louder”? What would be the ideal setup to create the best TV surround sound using the In-Ceiling speakers? Or are they just not meant for TV but for Music instead?
I understand Dolby ATMOS music from Apple Music can only be played on a pair of Era 300s through the Sonos2 app. Sending the signal from the Apple Music app on an iPhone to the Era 300s via AirPlay loses the ATMOS. On a Beam2 it can also be played directly through the Apple Music app provided it passes through an AppleTV that is connected with the Beam2 through a HDMI cable. Is that understanding correct?My other question is how this operates if the Beam2 and the Era 300s are grouped together. Will the ATMOS signal be passed from the Beam2 to the Era 300s? Or do the Era 300s receive their signal from the AppleTV through AirPlay (which I understand does not carry the ATMOS signal)?Thanks for your guidance, Ben
If I add a era speaker to my existing Sonos set up can I control the whole system via Bluetooth on the era speaker
Hi. I’ve got an offer to buy a Sonos Five (gen 1) pretty cheap. I’ve already got a Beam (gen 2) hooked up to my TV. My question is wether or not a Five (gen 1) will be able to connect to a Beam (gen 2)? I’ve only got music streaming and vinyl in mind as I’m expecting to buy a pair of Sonos Ones as satellites for the Beam eventually.Any advice is appreciated :)
It would be nice to have at some point. The codec has an option to change dialogue volume for TV Audio. (They transmit dialogue Audio separately)Sonos could be the first device manufacturer for TV equipment to implement support :)The 3D support is not important to me but could be useful as well.
NO ATMOS SoundProducts:SONOS ARC LG OLED65C8PUA Apple TV 4K (2nd generation) 2021 (A2169)Cable setup: ARC via HDMI cable into LG HDMI ARC input Apple TV via HDMI cable into LG HDMI (standard) input Apple TV Settings:Audio format / Immersive Audio ATMOS setting = greyed out NOTE: LG OLED65C8PUA TV does NOT have eARC. Can I ghet ATMOS with these products? IF YES - detail cable setup and/or Apple TV Audio settings Thank you. Moderator Note: Modified in accordance with the Community Code of Conduct.
I upgraded the living room Sonos ones to the era 100. It definitely much sounds better in that room. I was looking for more room filling sound and they just sound quite a bit better in a room that size. Music only with beam and sub. The entire room now sounds phenomenal. My living room always sounded a little bit thin even with full mode and upping the surrounds. Mid-range and bass both sound better. Got rid of my play 3s when they kept losing connection even with boost and tech support, and switched to the newer ones. The era 100s both sound better and really fills the whole room with music. Fives would not perform well at lower volume plus shared walls can't blast out my neighbor. I won't be upgrading the ones with beam and sub in my bedroom. So worth it for a bigger room.
Bonjour j'ai changé mon opérateur internet et depuis je n'arrive pas à connecter mon enceinte??? Comment faire ?merci
I know a lot of Era 300 users are requesting that the front-facing driver be activated on the Era 300 when used as a surround speaker. Although this would be a useful option, I think an even more important feature would be to offer separate surround level sliders for the side surround and rear surround channels.I’ve been testing my Arc + Sub + Era 300s setup pretty extensively for the last few weeks. The biggest issue I have with the Era 300s is the rear surround channel levels are much much lower than the side surround channels. This is particularly noticeable when listening to music in Dolby Atmos or 5.1. I have also confirmed this with a 7.1.4 Dolby Atmos Test Tones video. If I had the ability to increase the rear surround channels to match the side surround channel levels, I think this would greatly improve the surround experience with the Era 300s and might even be a good alternative solution to enabling the front-facing driver.
I am setting up audio in my office mostly listen to Jazz in that space, it is a small room 120 sq feet. For about the same price I can put 2 era 300’s or 2 100’s with a submini. I was thinking the 100’s with the submini would free the 100’s to do what they do best and the submini will fill bottom end? I dont really like the way spatial audio sounds on a lot of tracks so that is less of a concern for me. Thoughts?
Wondering if anyone knows whether there are any plans to release a version 2 port (as Sonos have done with other products) with updated hardware. Or indeed if there are different hardware revisions anyway just not visible from the product name.
I currently have an arc,gen3 sub,and play 1’s as surrounds. I plan to move the play1’s to the bedroom for music and I had planned to buy the era 300 for surround replacement. After hearing that the front driver is not working when in surround mode I am thinking of bypassing on those speakers. Now I am thinking about the era 100 for surround speakers. I listen to music around 20% of the time with my current setup and it sounds good but with the 300’s I am reading that music doesn’t sound good unless you’re listening to atmos music. So I was thinking that if it doesn’t sound that good with regular stereo music then it might not sound good for movies that aren’t Dolby Atmos. In fact with non Dolby atmos movies two of the drivers wouldn’t be working (front and upfiring)? That’s why I was thinking I should buy a pair of era 100’s for surrounds. All the drivers would be activated 100% of the time. I realize I wouldn’t be enveloped in a spatial sound bubble when playing Dolby atmos material b
Having researched easy to use setups for my technology challenged parents, I think the Sonos “Immersive Set with Beam” (includes Beam Gen2, Sub Mini, Era 100 x2) might be the best solution for both watching TV & listening to music. However, I don’t have personal experience with Sonos components, so appreciate any help or insights you might share.I’m assuming setting up / configuring the audio for TV watching will be very simple using the Sonos app (I’ll do this for them). But I’m unsure about whether the configuration should (or can) change for listening to music (ie disabling the sound bar). Again, given that my parents are not tech savvy, any configuration / mode change (TV <-> Music) would need to be extremely simple…preferably using universal remote instead of Sonos app.CONFIGURATION (planned, haven’t purchased yet):Television HDMI Arc or eArc to power on/off and volume control the speakers. Prefer to avoid using A/V receiver, instead using TV’s HDMI Arc functionality.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.