Show off your setup or get inspired by others
Recently active
I only have had my ERA 300s and Beam for 2 days and I am feeling confused, stupid and discouraged. Is there an easy way just to delete a room(s)? I try to learn and solve things myself but other than a “factory reset” I do not see how to delete a room. My Beam is connected to my TV and I have two ERA 300s. All I wish to do is have my two 300s linked together so that I can add to my Beam together when I want to play music.Thanks!
Hello Sonos Community, I purchased three total Era 300s, two of which I setup as a stereo pair in my living room. I would like to connect the third one to the stereo pair, and set it in a different room, but have it playing the same music as the stereo pair. Is this possible? Or can only two Era 300s connect and play the same music at once? Thank you!
From my experience, the best Sound Experience requires an initial phase of “breaking in” the Speakers to expand the ranges and to develop the sound Maturity.Is this recommended for Sonos products? (i.e. Running very dynamic bass and challenging treble albums in repeat to open up the Sound Range & Spectrum)Any suggestions in this regard as well? Thanks!
Do you know if Sonos ray has bluetooth incorporated ?
Hi I just bought a Gen 3 sub and sonos arc. Am liking the sound after tuning it yesterday. Curious. I have two in wall surrounds. If I were to get a connect amp gen 1, will this integrate with the sound bar / sub? I hear Connect Amp Gen 1 works on S1 app...I don’t mind that...if it means when playing sounds through my TV the sound bar, surronds and sub work together. Thanks.
I can’t do the trueplay of my system. It keep coming out this trueplay problem page. Let me know what should I do. I have Arc+(2)Era 100 and (1)sub.
I wan to get into vinyl and could use some advice on the best Sonos setup. After some initial research, it looks like a solid starting point would be the Sonos Five paired with a quality turntable.Currently, my setup includes four Sonos One SLs (wall-mounted) — one in the living room corner above the TV, two in the dining room, one in the kitchen — and a Play:1 in the office on a different floor.Here are the options I'm considering: Purchase a new Sonos Five along with a Pro-Ject T1 (potential savings if bought separately rather than direct from Sonos). Explore a second-hand Sonos 5 (gen2) along with a Pro-Ject T1 (or similar) Consider a second-hand Connect paired with a Pro-Ject T1 and continue using my existing One SLs and Play:1 (is this wise or possible) Additionally, I'm thinking about adding a Sonos Beam to mount under the TV (not right away).If not a Sonos Beam, would I be able to use the Five, move it and connect it to the TV on the occasional “movie night”?I'd appreciate y
Arc + sub vs 2 pieces of five, for listening to music, which is best?I just got a Arc + sub for my living room. Before i got a Amp + sub and 2 peices of not active speakers.my first thought is the my old set up was better for music.would it be better for me to go for 2 pieces of five instead of using Arc + sub?i dont care that much, which is best for TV and movies.
I have read lots and lots of posts on this but many of them are old posts. I have tried many things but still no luck. I have my sonos boost wired to a port on my ubiguiti switch which is setup to use a separate VLAN than the rest of my network. All my speakers are connected to the boost wireless through the Sonosnet. After two very frustrating days of trying to get all the sonos stuff moved to the new VLAN, I finally called support. The guy right away had me uncheck Multicast Enhancement and Multicast and Broadcast Control. That seemed to work to get the speakers setup on the sonosnet with the boost and be visable from my iphone when on the same wireless network as the speakers. However, if I am not on the same wireless network, the Sonos app cannot see the sonos system. I have tried entering Firewall rules for various ports from all the threads that I have read but still nothing. I am wondering if I have the Firewall rules setup correctly. I am fairly new with unifi, so sti
Hi, I know that the Roam (mic) does have an automatic trueplay function.I also know that the SL (speechless) doesn’t have any mic build in, hence no automatic trueplay.What I don’t understand is why trueplay on the Roam SL is not available through the mic of my iPhone.Just like you use trueplay on the OLD “play ones”, they also did not have any mic.Hence trueplay was achieved by using the mic of your mobile phone.Am I wrong and is it possible, or are you planning to add this feature in the future? Regards.
Hi All,I currently have a Beam (Gen 2) and am looking at upgrading the system with either 2 off Era 100 speakers (to be used as rears) or a mini wireless subwoofer...eventually I will buy both, but which should I buy first to get the best possible enhancement to sound when watching TV primarily, music and then films?Any advice will be very much appreciated.
Hello,I just bought a new house that has in-wall speakers and a mount for a TV, but nothing else and I am new to Sonos. I’m looking for some advice on how to set up a home theater system.Here is the setup: there are a total of 8 in-wall speakers throughout the house that are all wired to one spot in a mechanical closet. The first 2 speakers flank a fireplace in the center of the living room, and the TV mount is off to the right side (i.e., not centered on the main 2 speakers). The TV mount is wired with power, HDMI, and ethernet. There are 2 more speakers behind the living room in the kitchen, which is open to the living room (so could be used a rears). There are 2 more speakers in an elevated loft space to the left of the living room which is open to the living room, so could be used with the TV theater setup but might throw the acoustics off since they are on the left and there is not a matching pair on the right. There are also 2 more speakers in a separate bedroom.One option I was
Bonjour à toutes et tous j ai un AirPort Express Apple que je voudrais brancher sur 2 sonos connect amp simultanément via un y de l airport vers les rca des 2 sonos connect amp vais je avoir le même son en meme temps sur les 2 amp connect sans echo c est pour mettre dans un jardin donc au même endroit Moderation edit: Translated using Google TranslateHello allI have an Apple AirPort Express that I would like to connect to 2 Sonos Connect amps simultaneously via a Y from the airport to the RCAs of the 2 Sonos Connect ampswill I have the same sound at the same time on the 2 amps connected without echo it is to put in a garden therefore in the same place
Hello,Bought a new Samsung CU8000 TV and connected Beam Gen 2 via eArc. My system also has two Ones as surrounds. With the TV set to pass through I get all the Dolby outputs. This works well for maybe 2 or 3 hours and then the sounds distorts slightly, it's like it cuts in and out quickly. If TV audio set to Auto sound is perfect but output is always PCM. Anyone had this and worked out a solution? Should I be concerned using PCM in terms of the quality of audio? Is this as good or worse than Dolby outputs?
Hi, we have recently moved into a property that has veiling speakers throughout the house (they seem to be in nearly every room!) and external one also. All are hardwired in and areas where it’s designated for a TV seem to have amplifiers and there is 3 boxes wired up in the mechanical room that I believe are related to the speaker system.I’ve not even tried to get anything working with the gear that is there currently. I’d like to get this working with sonos but have no idea what would be needed and how I’d go about it.I’d like some advise on what Sonos products I’d need and then how I’d go about getting this working.Thank you!
I’ve just bought a Sonos 5, but I can’t seem to pair it to my Bluetooth turntable. When I press the Bluetooth search button at the back, it doesn’t chime and the light doesn’t flash blue, it only flashes red.
can era 300 and ray be synchronized to work together
I am in the initial planning stages of a system for a new home currently under construction - more on that later. Right now, quick question - If I have a Sonos Amp powering 4 ceiling speakers, can I wirelessly connect a Sonos Sub to that as well? So my Amp powers the 4 ceiling speakers and the powered Sub connects wirelessly and works as well? Or - would it need to be wired to the Amp RCA? Or - Am I better powering 2 ceiling speakers and a passive dual-voice coil sub in this zone? I am concerned that ceiling speakers alone will not give the depth and bass that a sub will add. I am brand new to Sonos - don’t own anything yet, but not new to home audio.
I can’t install the sub mini. The app says he can’t find it. I tried to reconnect power, pushed the button, light is white, blinking or red, blinking. Nothing works. What am I doing wrong?
tl;dr - are you able to play from Amazon Music Unlimited to Sonos via connected devices or only via AirPlay or Bluetooth?I just treated myself to a pair of Era 100s (paired as stereo “Office”) and down the rabbit hole of hi-res audio streaming services, starting with Amazon Music Unlimited (Individual Plan).I prefer to browse and play through the streaming app, especially with Amazon’s additional labels (Atmos, HD, Ultra HD, etc.). I’m unable to play from the Amazon Music app to Sonos.I’m able to do this on Spotify. I’d stream through “another device on this network” (instead of “AirPlay or Bluetooth”) without any issue:When I try to do that through Amazon, it connects to Office but won’t go beyond this screen and music won’t play:After that, if I try to play Amazon through the Sonos App, I get a notification about device limits: So, I can play from Spotify to Sonos via network devices, but unable to from Amazon to Sonos via network. I can play from Amazon to Sonos with AirPlay but sou
System with a playbase (wired), two ones (wireless) as rear surround. Just bought a sub (wireless) to complete the set, however getting it to connect has been a struggle and now that it's connected I'm not getting any sound out. Diagnostics are here.... 1199550220
Hi all,I have my music library stored on a Synology NAS drive and it has been working without issue until recently - I may have made some changes to the S2 settings and screwed it up.At any rate, I have all my playlists, etc with Apple Music and am able to play all of the music via Apple Music from the source files that are stored on the NAS.In S2 I have all of the same playlists, etc. but for any and every song that I attempt to play S2 indicates that it cannot locate the file.For Apple Music my preferences are pointed to /Macintosh HD/Users/username/Music/Music_NAS/Media.For some reason on the S2 the Music Library is pointed to //Diskstation/Music. The location of the iTunes files are actually located in //Diskstation/Music/iTunes.The file structure for iTunes (Music) makes me crazy. I want to say that I set up iTunes to point locally for the playlists but have the files stored on a NAS for performance (maybe this was a suggestion by Synology).At any rate, any thoughts on how to get
I was about to buy a Sonos Five speaker (discounted now) because we’re moving and I will switch to Sonos. But I just found out, the speaker was released in 2020. I don’t need it immediately and I am willing to wait a few months. Haven’t found any info online either if a new version is in the pipeline. Of course there is the ERA 300 but since I’m listening to non Dolby Atmos music most of the time, the Five might still be the better choice? Also: I will connect my Technics SL-1200 and listen to records.
I am considering purchasing Sonos speakers and considering a variety of approaches. The room is about 12 X 20 X 9. Our sitting area is about 8-10 feet from the TV. The TV is a 3 year old 55” Samsung, it has ARC HDMI output but not eARC. We have a new Xfinity cable box and good Internet connection.The TV is currently mounted above an enclosed gas fireplace, which has an 8” shelf on the top of it. The TV is mounted to the wall above the fireplace shelf on a swivel arm connected to the wall which lets me move it out to be flush with the outer edge of the fireplace shelf or all the way back to the wall taking up ~2” of the shelf.The swivel does not let me raise or lower the TV at this point.I like the idea of a Sonos Arc (and optionally 2 sonos one’s for rear speakers), but not sure if this will fit our setup.I see two choices were we to get a Sonos Arc: 1) raise the height of the TV so that the Arc can be on the shelf above the fireplace - either by adjusting the TV swivel arm (i.e. re-at
Hi there I am trying to set up some sound for a retail store. The store is about 50m2 (500 sqft). It’s a dispensary so I def. want to create a vibe in there but not blast it super loud. Behind the counter there is a flat surface with plenty of space to put a record player and speakers. Am I better off buying two fives or 4 smaller ones with a sub ? How would I connect the vinyl player to the system ? I know it can connect to the Fives, can it also connect to smaller speakers ? Since it is a retail store with rotating staff I want something fool-proof, so a wired solution between record player and speaker is preferred over anything Bluetooth. Thanks for any help !
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.