Troubleshoot, tune and get the most out of your system
Recently active
I have 2 x Generation 1 Sonos Roams. One white and one black.I changed my WiFi Router a month ago and had to reconnect all my Sonos kit.For some reason I have never been able to reconnect the Black Roam to my WiFi. The White Roam works fine.I noticed that the "Find Missing Speakers" tool has disappeared from the App, and when I used "Add New Speakers" feature it doesn't find my Black Roam.I can still use it as a Bluetooth speaker and I can transfer music across from any home speaker to the black Roam as per the switch feature. I suspect my black Roam is missing an essential update because I know in past the Speakers have gone missing when they aren't updated. However since I have a new Router I am unable to update the Roam speaker. Help?
I can only connect our classic Hub via Ethernet cable + Play:3 speakers / or my Playbar via cable to Router – yet not both in the S2 app. Any suggestions how to fix this?
I understand sonos does not support DTS:X or DTS-HD Master. What I am trying to wrap my head around is: if the DTS:X or DTS-HD Master signal is “passed through” my tv or device, does sonos 1. play it as full dtsx/dts-hd, or 2 convert it to pcm and discard height info, or 3. not play it at all…??? Also, if I route it through an apple tv and it converts it to pcm, does sonos then play that (without the height data?Sorry for being a noob...
Since I changed my internet provider, my Sonos 5 won't play unless connected with an Ethernet cable. My modem is far from where I want to place the speaker. What can I do?
Dear Sonos Team,When stereo PCM is sent over HDMI, the Arc forces playback through the front channels only. Sonos frames this as “purism,” but it actually blocks creative intent and creates inconsistency: Artists’ intent is restricted. If a stereo track is designed to fill the room, Sonos prevents rears from engaging. Other brands allow “All Channel Stereo.” Inconsistent behaviour. The Arc mirrors stereo to surrounds in music mode (AirPlay, Spotify Connect), but forbids it over HDMI. There is no technical or licensing reason — simple channel duplication costs nothing. Purism becomes interference. By enforcing silence in rears, Sonos isn’t respecting the mix, it’s imposing a design choice that neither creators nor customers asked for. It’s like buying a 4K TV, but when you watch HD content the manufacturer only lights up the centre part of the screen, leaving black bars around the edges, saying “we’re respecting the director’s intent.”Unless there is a clear, rational justification,
Original thread here: Looks like the random rebooting is back...
Playbar. I have lost my cables. Do I need optical Toslink cable or the adaptor?
I updated to the latest and I am not seeing the new play button functionality. It still behaves like it did before this update. Is this a slow roll out?
I have a Play 1 and Play 3 that no longer work. Can I get them serviced? They are out of warranty.
Hello ,Can anyone help me with some tips,:)I have 2 burned capacitors c286 and c285 ,does anyone know what values are those and what have caised the issue?
I have a Sonos Beam Gen 1 speaker and play music through it from my Sonos 1 app. Recently a favourite station of mine (TMM 1) from TuneIn only plays the advert but then not the music. I cann play the same station from TuneIn through my UE Boom speaker. Any thoughts?
Hi guys. I have just purchased my Sonos Move 2.Im going to set the Trueplay up later when my daughter arrives home, as she has an iPhone whereas I'm Android.If I choose a room, say sitting room, do the Trueplay calibration and save. I then move to the kitchen, opt for kitchen on the list of rooms, do the Trueplay calibration in the kitchen and save, when I next use it and choose kitchen on the Sonos, will it automatically use the Trueplay settings for that room that were originally saved?
Hello everyone,This is my first time posting in the community—I hope I can explain my issue clearly. I've been using Sonos for a couple of years and I love it, but for the past week, I've been facing a problem I just can't solve.My setup: 1 Sonos Beam (Gen 2) connected to the TV 2 Sonos One SL as rear speakers Router: TP-Link Archer C7 My phone: Samsung Galaxy S22 with the latest version of Android The problem:The Sonos app on my Android phone suddenly can't find any of my speakers. It shows the message "Unable to connect to Sonos." The strange thing is that if a friend comes over, their iPhone connects without any problems and can control the entire system. The music continues playing if started from their phone, but I can't do anything from mine.What I've already tried, with no success: Restarting the router and waiting 5 minutes Unplugging and replugging all Sonos speakers Uninstalling and reinstalling the Sonos app on my Android phone Clearing the app’s cache and data
Hi. Can you guys recommend sturdy wall mounts that physically grab the speakers firmly as the ones I bought for my four Play1’s and they came dangerously loose within weeks in fact one fell and was saved by the mains cable. Problem is they rely on the bolt hole in the speaker that seems to be made from cheese. My brackets don’t have any branding on but will try and upload a pic just in case anyone else is tempted to follow my foolish act. Sorry the image won’t upload
This has got to be one of the sickest jokes ever.. One year after the dreadful Sonos update, I noticed that I could finally edit and create new sonos playlists again. However after editing some of my old playlists, and creating a few new ones I now receive an error when opening these playlists saying that "the content is not available". This doesn't make any sense; some of the lists I just created, so the music is obviously still available. I have no problems with my WiFi, my system is up-to-date, and there doesn't seem to be a glitch either as I still can't access the playlists after closing/opening the sonos app multiple times. So everything signs to the sonos app still not working as it should be.Is anyone else experiencing smth similar? Right now creating playlists feels like playing Russian roulette; you could spend hours creating them, and who knows if you can still access them seconds later..
I am in need of help setting up an undercover patio speakers and tv. My home is being built right now and now is the time to run the wires. If I am understand correctly, I can order an AMP and Outdoor Speaker set. Wire the speakers to the AMP and store the AMP inside while the speakers are attached to the outside of my home. Then I want to connect a BEAM and hardwire it to the TV and also connect it wirelessly to the AMP. Will this work as I described and work seamlessly with the TV audio?Do I need to order specific outdoor speakers? I was sold a pair of 300 but I don’t believe these to be correct now. I am planning to use a Sylvox Outdoor TV. Will the BEAM be ok undercover outside? No rain will be able to get to it but there could be dust as the home is being built on 7 acres. Thanks for any help and guidance. I have included an image as to how I think it works. Sorry I advance as this is all new to me. Any specific products you recommend I would appreciate links to order directly
The Sonos website says that Play:3 is compatible with S2 or S1. Several posts in this forum indicate that Play:3 can connect via S2 app. I’m trying to move Play:3 from the S1 app to the S2 app - unsuccessfully. This is what I’ve done so far.S1 app doesn’t have a “forget this system” choice, so I quit the app, and rebooted my Android Galaxy S21 with latest OS. Factory reset Play:3 (lights only ever flash white then go to solid white)Play:3 was also plugged in via Ethernet cable.Started S2 app.Chose Forget this system (I have a sound bar hooked up through S2)Add components.S2 recognizes both sound bar and Play:3Choose Play:3 to connectError message “This component is only compatible with S1 controller:”Sound bar connects fine. Any ideas? Thanks.
Hello! I feel like my sound system lacks of bass. Is it only me or anyone else that what a bigger sub by Sonos? like a 12inc?
I’ve upgrade my IPad Pro M4 to latest iPadOS 26. When trying to stream music from YouTube to Sonos system via AirPlay/Blutooth, it get the message “Something went wrong. Tap to retry”. Tap but still doesn’t work. But if I switch back to iPad speaker, works just fine.
I've been experiencing issues for the past few days—possibly since the update that rolled out yesterday. On my iOS device (iOS 18.7), I’m currently unable to enable or disable Trueplay. My setup includes a Beam Gen2, two Era 100s, and a Sub Mini (firmware 80.29.4).When I reboot the Beam Gen2, the Trueplay toggle briefly reappears in the app.However, as soon as I interact with it, the toggle vanishes again.It’s quite odd. Do I need to reset my entire system, or is something else going on?
Buonasera,volevo sapere se era possibile collegare un microfono esterno tramite adattatore LINE-IN con sonos era 100.Grazie
Hi Community,First time posting on this community but I’m a long suffering Sonos customer! In the “good old days” if my memory serves me correctly, a “group” was called a “zone”. When we wanted to play the same audio source simultaneously on different zones, the app just copied the source to the various zones but control was independent i.e. you could pause a specific zone or change the volume of the zone and it didn’t impact the rest of the speakers. Now the current iteration is by a far a great improvement in so much as “party mode” (as think it used to be called) is true everywhere play controls house is in sync. What I am missing however is, what if I want to control a group as part of “everywhere”. For example, “upstairs”, “downstairs” & “garden” each have 3 speakers in them in various rooms. I want to turn “garden” up but leave the rest unchanged - I have to change all three individually within the “playing now” control for “everywhere” - OR because the “garden” group exist
As a long term Sonos user I recently purchased an Era 300 to replace old Ones. The sound quality is excellent when playing music, radio, etc. however the Alexa voice is way too quiet. If I increase the volume to better hear Alexa the music becomes too loud. Is there anyway around this problem? Jim
I am thinking of upgrading my Move to a Move 2 (which has line-in connection). I would like to use the Move 2 to play from my record deck which has an amp. I have the Sonos adaptor and the cable. I would hope to then be able to group the Move 2 to the rest of my Sonos speakers to play music from the turntable. I think this should work, but before I make the upgrade investment I wanted to check if anyone else has successfully done this?Thanks in advance.
I plug the roam device in and a orange light turns on then after a few seconds it turns off cant seem to set the device up either
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.