What to get

  I bought a elac's ub5 speaker yesterday. Picture above is the spec sheet of it. I'm considering to buy sonos amp but seems like it has too much power for my speaker.   This speaker is 4ohm. So the sonos amp's side, It would be 250w.  But this speaker's peak power is 140w. Almost twice to peak power.   I'm newbie to amp, and passive speaker setup. So wondering this would be okay…   I already own a pair of sonos one, and one symfonisk. I want to use it all grouped playing. Ub5 for front L,R, Sonos one for rear. Symfonisk for mono center in a room   So the sonos amp is the only option...    Hope not amp burn my speaker's coil...but If it's not fit for sonos amp.. I would return ub5..   I'm gonna buy a DAC and turn the DAC's volume knob minimum. Is that gonna make it better or meaning less?      

Hey Sonos. So i have been reading that i will be able to replace the battery on my Sonos move at home sometime in the future which sounds great! However, i am curious: When i choose to replace the battery myself, will this cancel out the IPX7 rating on my Sonos Move? Or will it still be IPX7 rated even after i change the battery myself? Sincerely BJMN.

I picked up a pair of homepods at Costco for $149 each. I am debating returning them and picking up a pair of Sonos ones instead. What would be a better option for me?I have google home hubs set up all around my house, and use that to control all of my smart home stuff. I wanted speakers in my kitchen and bedroom that sounded a little better than the hubs (they sound pretty bad). I also have a Sonos playbar, sub, and two Sonos play 3’s in my living room that I use for the TV and music there.I have both a Spotify and Apple Music subscription (my wife likes AM and I like Spotify). Would I be better suited with the Sonos Ones or the homepods?Thanks!

I am writing this question because I do not know how it is possible to connect any Sonos soundbar with my Projector (EPSON TW-5600) and Fire TV Stick.  The Fire TV stick is connected to my projector using the HDMI port, the projector doesn’t have an ARC connection.  The fire stick has bluetooth so I can send the audio to a bluetooth enabled soundbar but this doesn’t help when using a Sonos speaker.  I think it is not possible to use a Sonos soundbar with a projector but I am hopeful there is a way!  I have not purchased the soundbar yet, I have many Sonos speakers so it makes sense for me to buy a Sonos soundbar but it is problematic.  Thanks in advance!!!   

Hi, I have several eligible devices. They are online and this is showing up on the my account page, but I don’t see any option for the trade up scheme to be applied to any of the products. I am viewing the page on an iPhone 7plus if that makes any difference.   Can Someone assist?

I replaced my existing Definitive Technology UIW 83/A in-ceiling speakers and Connect:Amp with SONOS Architecture In-Ceiling speakers and SONOS Amp. My previous speakers required a 9” diameter cutout which was too big for the SONOS In-Ceiling speakers. So I designed an adapter trim and ordered 3D prints using Nylon 12 (SLS) dyed black. Attached is a photo of the installation and a link to the adapter trim STL file should anyone need to 3D print a pair. I like the small black reveal but if one prefers they can print the adapter trim in white as well.   The SONOS In-Ceiling speakers with SONOS Amp sound fantastic. They have similar timbre and so blend much better with my other SONOS players than my previous speakers; and they look great.    The trim adapter STL file is publicly accessible and can be downloaded here: TrimAdapter.STL

What are peoples thought of replacing a play 5 gen one with either s beam or play 5 gen 2.A bit of background. Had the gen 5 for a few years, acquired used mainly  for the headphone jack to allow for night time use. That has since been replaced with a bose headset.It now lives in the bedroom next to the tv but not connected to it. And used for casual listening,. While I have no issue's with the 5, I worry Sonos are about to make some changes that will impact my 5 negatively, no evidence on my part just a gut feeling and ii'm looking nto a replacement for it.A 5 gen 2 gets me the best sound quality but the beam allows me to connect to the tv, a voice assistant  and airplay 2, wife is an iPhone user, my question really is if these others features are enough to justify the lower sound quality of the beam, and it's also cheaper. I think it is but curious on what people think. How does a beam stack up against the 5 gen 2.O, the beam also allows for a 5.0 expansion in the future, though I am

I have an Onkyo receiver that is compatible with a Sonos Connect, will I get at least the same compatibility with a Sonos Port?Further, are there any advantages with the Sonos Port apart from what I understand of upgraded audio components? Thanks in advance. 

Here’s my proposed configuration:Sonos Playbar (wireless) Sonos Sub (wireless) Sonos Amp (could be hardwired to Ethernet, or wireless) Record Player (Pro-Ject) Two Unpowered Bookshelf SpeakersI’m trying to figure out what I need to do the following:Use record player with unpowered bookshelf speakers Use unpowered bookshelf speakers as rear surrounds for Dolby 5.1, in conjuction with Sonos Playbar and Sonos SubIs it even possible to have the above hooked up at the same time? Would I need two Amps in theory, assuming I wanted to have the option to stream the record player via Sonos?I don’t have the option to hardwire my Playbar to Ethernet or the Amp.Any advise would be greatly appreciated. 

Hi all, We recently moved into a new house that had some passive Definitive Technology speakers wired for surround sound in the family room, there are also some in ceiling speakers throughout the rest of the house wired back to the family room. I was drawn to Sonos for the ease of use and clean designs so I purchased 3 Amps direct from Sonos. I set this up to run a 4.1 Surround System in the Family room and the 3rd Amp is powering the Ceiling Speakers. Works great. I then wondered if I am missing out on a Center channel so I am also testing a 7.1 Onkyo receiver which can do much of what the 3 Amps are doing for much less money, roughly $500 versus $1800 for 3 Amps. With the Onkyo I set it up for 5.1 and the 2nd Zone powers the ceiling speakers. But here I am wondering if I should go back to the Amps, I like the user experience better and slick design of the Amps. It feels more modern to me than the larger AV receivers Plus I enjoyed a few features that sonos allowed me to do that I can

Would I be correct in assuming that if I want to output all sound from my PC to my Sonos Move’s, I will need a Sonos Amp or Connect? I’d need to use a HDMI to TOSLINK adapater to connect my PC to the Amp (given my PC doesn’t have HDMI ARC, unless my Nvidia 1070 would work?) https://nvidia.custhelp.com/app/answers/detail/a_id/2796/~/which-hdmi-audio-formats-do-nvidia-gpus-support%3F Perhaps the GPU will simplify things for me. However, it’s still dissapointing that to gain this flexaibility in the Move’s I need to spend another $500.

I would be looking at buying the SONOS MOVE for use in our MotorHome (That’s an RV @Ryan S and @Chris) So as the motorhome runs on 12v which I know the Move doesn’t then I need to have a good idea how long it will run from a full charge connected to my iPhone via Bluetooth.I can plug in 240v but if hooked up on a site it would probably knock out the power due the high amps. ThanksDave

Hi all.Thanks in advance for reading. I have looked through previous posts but there seem to be so many different set ups that I want to be sure I get the right product.I am setting up a home cinema system. At the moment I have an Nvidia Shield (2017), an old Optoma projector (which will be replaced in next 12 months so not a fixed part of set up), a Gen 1 Play 5 and two Play 1s.I have a shelf at the back of the room with space/plugs to house the projector, Nvidia Shield and any speakers or other equipment needed there.Ideally, I was hoping that I could connect the Shield to the projector and a Sonos product and then stream the audio from the Shield/projector to the Play 1s or another Sonos product at the front of the room.Will that work if I connect a HDMI from the Shield to the projector and then connect an optical cable/HDMI to any Sonos product? Or do I need something like the Connect or Connect Amp? Would that even work to relay the audio to the other Sonos speakers in the room?As

I thought it might be interesting to compare two different strategies for getting Sonos music in your backyard. Both strategies have their positives and negatives, and what works for you is going to depend on your particular situation and needs. In order to compare them fairly, let's consider a relatively small space where a stereo pair of speakers will cover the area nicely. Cost - Advantage MOVE The cost for two Sonos MOVE's is $800. The AMP costs $600, leaving $200 for a pair of speakers, speaker wire, and potentially installation costs. Although you could put in a system for under $800, it's hard to believe you'd get the equivalent sound quality of a pair of Sonos MOVE's. One thing to consider is that you'll like need a shelf or table to place the MOVE's on, which you may or may not already have, that will add costs to the MOVE. Audio Quality - Advantage MOVE This is going to be subjective, and will depend on the quality of the passive speakers used with the AMP. However, if usi

I have a Beam with sonos sub and play 1 speakers in my living room and I am looking to replace the Beam with sonos amp and Mission floorstanding speakers. The reason for planning that is because I think it might give me a good option for music and movies in same area rather than setting up the speaker in another room. I don't have an amplifier so need to get one if I set the speaker separately. I don't know how well the phantom centre works for movies with sonos amp as there is no option for that whereas from the beam dialogue is quite clear. Hope you could share your thoughts. Thanks

I recently installed a WD  NAS on my systemI uploaded all of my fairly extensive music library up to the NAS with no issues.When I try to add the Folder on the NAS to Sonos with the Windows App I can see the folder in the add music services window, but the “button” to select it is greyed out.I have tried it in both the public and private sides of the NAS, and have tried moving the folder out on it’s own. I have done some research on permissions and think I have things set up correctly but cannot get the ability to select the folder.I assume it is some sort of a permission problem but am at a loss to sort it out.Can someone advise me?

Hello Everyone,Having spent many years and way too much money on hi-fi kit, I am selling most of it and going for wireless kit. I already own a pair of HomePods which sound great, but I am disappointed by the lack of EQ settings - my preference is more treble and bass, as I am not overly impressed with the linear sound from most systems.I recently auditioned my friends Sonos Soundbar, sub and 2 x Play one’s. I was very impressed and I liked the ability to adjust EQ settings to my preference. I am planning on starting out with the Sonos Amp to connect it to my existing hi-fi speakers and adding a turntable. From there I will add Sonos Play 5 or Ones to additional rooms. My question is - does anyone know if the Sonos Amp has the ability to adjust the EQ settings when used with hi-fi speakers and a turntable? Could I add a Sonos sub to the hi-fi speakers for additional bass and still just EQ settings?Thanks,Andy

I was tempted to pick up a couple of ‘Play:X’ speakers being sold used.  I’m not talking about a generic term for any of the Play:[1,3,5] speakers --  they literally have ‘Play:X’ as the model name on the bottom. Most Sonos:One’s I’ve seen are labelled “One” on the bottom, so it makes me wonder if these are some sort of prototype or pre-production model of the Sonos:One?…   Concerned that Sonos may not allow them to work if they were never intended to be found out in the wild.  TIA for any info…  Paul.

Two questions on the trade in program. Can the discount be applied to bundles also?can the discount coupon be used at any certified Sonos seller or do we have to purchase from Sonos? thanks,Mike

I am aware that the new SL can be paired with a Sonos One but I have an older generation 1. Can the One gen 1 make a stereo pair with an SL?

For everyone who's looking to extend their existing Sonos setup with SYMFONISK speakers or is just starting with Sonos/SYMFONISK, I've setup quite an extended list of IKEA SYMFONISK-product codes and information about their availability for various international IKEA locations such as Europe, UK, US and Canada to name a few. If this information interests you, you can head over to the following Sonos-reddit post* I've made: https://www.reddit.com/r/sonos/comments/ci20ww/product_codes_ikea_symfonisk/ ...as it's way to much info for me to put on this forum (my free time is precious). And I'm not sure if that's wanted, desired or appreciated by the Sonos community mods. Ans as I also believe this is more fitting to do on Reddit than here on this community forum. 😀 Anyway, this topic can of course be used to share your experiences regarding SYMFONISK products and their availability, your experience getting them and how they fit with existing Sonos setups. *(will be updated as more info

I already have a sonos move and it sounds amazing. I was wandering if I should I another $400 Sonos Move to make a stereo pair? 

I've been reading and researching, and have come up with a plan that I'd like verification of to make sure I'm not making a mistake :) I currently have a home theater setup using a Sony STR-DN840 receiver, along with some old Paradigm tower speakers, as well as a M&K setup with 4 bookshelf, one center and a subwoofer. I'm looking to get into something that's easy to use (for my wife), that doesn't take a ton of fiddling (the Sony has a lot of audio options for music/movie/PCM/Dolby, etc. etc.), and just basically 'works' while sounding good. I've been looking into getting first a beam or playbar with some Play 1's or One's, as well as a sub, but then started thinking I could probably incorporate some of my existing kit to save some $, as well as perhaps get a better overall product. Lately, however, instead of the Beam, I have been looking at the Sonus Amp. Seems to me that it would cover the 'easy/simple' aspect. It would allow me to use the Paradigms as my front L/R speake

The question is simple enough: Can I use the Sonos Trade up discount of 30% to buy Sonos-certified refurbished products?