Spaces & Setups

How do I get these to work? No matter what i do I can not get any luck. No luck with being a Sunday and customer service being closed

Ok so my setup has several network SONOS AMPs and speakers throughout the house. i also have Samsung TVs I’d like to have the TV’s playing the videos Spotify delivers while audio is provided by the Amps. I’m I just too far ahead in terms of what’s possible?

I have dropped my Sonos ERA 300 to the floor and the back cover has fractured, I want to know two things, are there any tool or program that I can try to know if this hit cause problems of the sound? and do you know sopport service in latin america?

I’d like to get a speaker that I can use to play music and that also connects to our projector for movie night. It’s worth noting that the projector is the primary TV in the home. It’d be tricky to put a soundbar in the front of the room, as it wouldn’t be anywhere near the projector. However, we could trivially use a line-in to connect the projector to an Era 300 (or other speaker) on a nearby table. My thought is that the speaker will lend itself well enough for both TV/movies and music - we’d simply connect the line to watch a movie.Is this notion ill-conceived? I would also consider a Play5, though I suspect that the 300 is better suited for this dual purpose. I’m also unsure about how well this would work if we expanded down the line - for example if we paired two Era 300s and/or maybe a sub later, all using the line-in from one 300 as input. Seems like something that might introduce lag? At a minimum it’s not eArc, and I imagine that will introduce some loss.Worth noting that we

Per the Sonos app, I was informed of the Voice capability of the Sonos Roam but could not find instructions on how to implement it. Thoughts?

Hi guys, are you able to add the Sonos Arc and Sub Gen 3 speakers to an AV Receiver?I have an Onkyo TX-NR626 which seems to have a lot of functions. I am not looking to simply use the Sonos app via the amp, my objective is to use the Sonos Arc Soundbar as centre speaker and the Sub Gen 3 as a Subwoofer as surround speakers with the AV Onkyo amp instead of buying traditional Speakers.Thanks,Kens.

I have Sonos everywhere in the house and one room has an old Bose lifestyle surround sound system with 5 speakers and sub. I have a Sonos port and if I turn the Bose on, change to the right input, I can play Sonos.  but it’s the only room in the house that doesn’t just turn on. I have to go into the room and turn on the Bose system first with the remote, wait for it to boot up, then switch the input.  it’s a hassle. Anyone know of a better way if I keep the Bose?

Hello guys,I would like to ask you I have a el. guitar and I wanna play backing track. So I need to put guitar tu input and play background music from mobile.Is this possible with sonos amp current gen.? Thank you for your helpJK

I have a problem with one of the Sonos One speakers, I press the touch button on the microphone but it doesn't turn on the light or work, I have reset it several times but it has stopped working, does anyone know how to fix it? Thank you

Beam Gen 2 with LG C1 and Firestick 4k Max. Firestick is plugged into TV and the Beam Gen 2 is connected to the TV eArc port. Everything set to passthrough. I think all is set up correctly as some streams are fine. The problem I have is the Beam (according to the App) is detecting some streams as DD+ even though I’m pretty sure they are Atmos. Any suggestions?

Lpcm sound is considerably quieter than Dolby Digital plus 5.1 or other modes, annoying Is that normal or not?Or maybe work in progress?Is lpcm the best option for my setup , gaming on ps5?Thanks everyone for helping in advancePeace Dawid

I  have the Sonos bug! Current setup in order of purchasePlay One (second hand. Didnt use it much)Era 300 Love itArc Love itI then added two Play 3 as theatre pair.But I live in a world of vinyl mostly My current hi-fi setup is Yama ha R$-N602 Network Receiver (AMP)For which I have connected to itMy 1979 Pioneer record deck (I have an Pioneer Ampt from 1979 but it is in storage due to pending house move)Sony SACD playerYamaha Network Player By the way Yamaha’s MusicCast is rubbish] Anyway if I buy a Sonos Port can I connect my Yamaha Amp to it that allows me to play any of the connected components (SACD player, TT etc) through my Sonos speakers via the Port? Obviously my SACD player, TT and Network player all connect into the ampWhat output do I use to the Sonos Port? TIA Steve By the way I took some advice from this site about adding rear speakers to my Arc and I picked up a pair of Play 3’s on stands for £150. Wow do they make a difference to the sound. Sub next

I am not new to home theater, but I am new to Sonos.  We having a custom build started and I will be meeting with the low voltage supplier in a couple of weeks and I am trying to see what Sonos system would work for my needs.  In the loft upstairs (22’x18’), we will have a TV on one wall and a sofa on the opposite wall.  What Sonos system would work best for that room?  We are also thinking about having a few other Sonos speakers around the house so I want to know what’s a good setup to have Airplay2 added in the system as well.  Thanks in advance! 

I have created two groups. Once I am playing some radio station in one group, how can I switch to the other group to 1) see (and change) the radio station 2) change the volume of this group?

I have two sonos roam and a sonos one. How do i connect them all so they will play music together

My beam randomly plays loudly at the same time every day 

New to Sonos after buying the Arc.  I read the instructions on speech enhancement, where it’s required to choose “Now Playing” when engaging in the app.  But do you have to set speech enhancement on individual channels, or does the setting remain the default for all channels or streaming services after selecting it? 

I bought an MP3 player for my music when I am on the road. Can I download my playlists to my home computer so that I can play them on my HIFI Walker 2?

I have two ERA 300’s set up in my large basement. I was thinking of getting a sub mini wireless subwoofer as they are on sale but want to make sure it will improve the sound. 

Hello,I currently have 2 era 100 in my living room (30m²). I want to expand this setting. I wonder whether it would be better to opt for 2 extra era 100 or adjust 1 sub mini. I only use them for music. Tim

I have an old URC System and a house with wired speakers in different rooms. I want to bypass the URC System and just use Sonos and attach the wired speakers in different rooms multiple zones and be able to control and listen to different music at the same time in those rooms. What sonos products do I need

How do I play music stored on my iPhone on my Sonos Connect:AMP? 

I have a 13 month old Beam that stopped working today.  It won’t power on.  I’ve tried the hard reset.  Any advise.

I have a turntable and preamp connected direct to Era 300 (in the living room). If I added a second Era 300 in a completely separate room (the dining room), would I be able to stream directly to only the speaker in the dining room or would any playback have to come form both speakers?

I have a Sonos system, Era300 and Era100 speakers, and I have a Sony LX310BT vinyl turntable.Everything was working perfectly for a few days: the vinyl player and the Sonos Era300 speaker are perfectly connected via Bluetooth with a steady blue light.However, for the past few days, no sound is coming out of the speaker when I try to connect it to either the Era300 or Era100.I tested my turntable on a Bluetooth Marshall speaker, and it works.I connected my phone via Bluetooth to the speakers using Apple Music, and there is sound.I've tried to troubleshoot the issue from every angle, but I can't find a solution. I don't know why, overnight, no sound is coming out.I have done the lastest update. Problem remains…Has there been a Sonos firmware update? thx!