Spaces & Setups

I’ve seen there are a few ways to hook up an analog stereo to Sonos speakers. I have a few pieces of kit going into a graphic equalizer and the EQ goes out to my current amplifier.What’s the best device for connecting all that to the Sonos? I’d guess the EQ can output directly to a Sonos Amp. That’s a lot of money. Are there other more economical options?I guessWhat’s the best What’s the most cost-efficient And what are the trade-offs between the two?

I have two Sonos Move speakers that are paired. Is it possible to play music from only one speaker without unpairing?When I unpair them, sometimes I have difficulty re-pairing them, so I would prefer to not have to unpair but be able to play one speaker at a time.The reason for this is at times I take one speaker to my backyard and leave the other in the house. But the one in the house is also playing which at times is disturbs those sleeping or watching tv.  If I hit the power button on one speaker it turns both speakers off  

The firm ware will not update after factory reset. I cannot add this speaker. The unit was repurposed to me from a friend. Any ideas? I am using a 5G router from Verizon.

Hi, I have updated to the latest version and now the app I cannot contact to my network anymore. I managed 1 time after I disconnected/ connected from electric. Does anyone have the same problem? What can a solution be ? br/ Johan

I have the latest new app updates and firmware.This problem has existed in the old versions.My rooms are set to specific volumes however the alarm function resets them all the same as the primary room each morning when I wake up.  I have to manually tweak each one, every...single...morning.Can this please be looked at and considered for a fix.Thank you.

I've spent a ridiculous amount of money and now I can't even get a single speaker to run its own music. Seriously 😠 frustrated. 

Hello, I own 2 Era 300 and want to complete with the Move 2 - ca you built a multi room via WiFi with the 3 of them ? 

The subwoofer Gen 3 was made to work or is just a pease of decoration? I am trying to connect this pease of decoration for two days already and nothing works.. 

Hello,there are so much dis-mal-functions with the new mobile app. It seems you have no date for publishing a fixed release. True ?Could you please put the S2 release into stores ?Thx

I have the original S1 Sonos setup with 8 speakers.  All but one are variable volume.  I have a Play 5 that is fixed.  I have other Play 5 speakers which are variable.  How do I change the 1 fixed volume speaker to variable?  Thanks for any insights.

Is there a way of connecting a Sonos Era 300 to ring with a third Gen Ring doorbell works on some of my other devices but not my Era 300s?

Is it possible to revert to the previous version of the app. I installed the new version about a week or ago and now my entire system is pretty much unusable.  I can’t play anything from my music library which previously was fine and if I try to play a radio stream it plays in random rooms and I can not turn it off.

My desktop app has failed to update - the help page says delete it and re-download - can anyone tell me where to download this from pleas as cannot find any links at all?Has anyone else had the same issue? 

App randomly tells me no products are connected, makes it's own decisions when to increase or decrease volume, and at the moment tells me Abba is playing although I know 100% it's Black Sabbath!How can I go back to the previous version.?Not running a large or confusing system - 4x1's, 1x3, 1xconnect. 

Hello, what needs to be added to a Sonos system to give you the option of adding a remote control (Roku in this case)?I have 2 Five’s giving me sound from my projector. I through adding a Sub would give me the option to sync with a remote, but not luck. Just making sure I’m not missing anythign before I return the Sub.(happy to see lots of other users requesting Sonos to introduce a physical remote control)

So, I’m thinking about putting together an outdoor theater on my pergola which already has the Outdoor (Sonos) Sonance speakers wired to a Sonos Amp. The last piece of the puzzle is getting a projector and setting it up to work with the Amp and speakers. What I’m wondering is if this is possible using AirPlay 2 completely through WiFi. The projector I’m looking at is either the Samsung Freestyle 2 or the LG CineBeam PF610P.  Does anyone have any advice they might offer?Cheers!

I have an array of S1 compatable speakers and amps. I just purchased a Move speaker (not the Move2) as you can convert it to be compatable with ios S1 app. The problem is the option to downgrade within the app seems to be unavailable at the moment. How can i downgrade the move speaker?I have tried setting up the speaker in S2 thinking i might be able to downgrade it there and then delete the app and seach for the speaker but can’t find the function in the S2 app either.Any help of advice greatly apprciated.

Sonos, did you fire your UX Designer on your most recent update.  It is a horrible.  I’m not sure it even works.  Still trying to get my system working. It’s difficult or impossible to play the same music on all speakers. 

Hi Sonos Community,I plan to swap my exisiting in ceiling speakers to Sonos ones and wanted to ask which size would fit.The hole in the ceiling is 210mm.Would 6” or 8” fit best. Thanks in advance

My system has worked fine since the upgrade but this morning I’m unable to connect via the App or manually.I deleted the App and reinstalled but still doesn’t connect, no support available till Monday. 

Can someone help me. I’ve been trying to get through to Sonos technical help but despite being on hold for over 2 hours a number of times I can’t get through.  my sub has stopped connecting - it’s a sub 3 and has a solid white light. The app says it has no network connection - the arc works fine. I’ve tried a factory reset but no joy. Any ideas ? 

I have some audio tracks that I made for a project I’m working on and I want to hear them on my Sonos system. I know that the tracks are fine because I can put them in “Local Files” on Spotify on my iPhone and then play them in my car. But no matter how I export the audio files, the Spotify speaker icon shows my Sonos speakers grayed out with the message “Can’t play this track”. It would be extremely helpful if it actually explained *why* it can’t play the track, but it doesn’t do that. So, what does this message mean and how can I bounce my tracks from Logic Pro so that they will play on my Sonos system? Thanks!Best,Jon

I'm trying to figure out a fully wireless amp and speaker solution. I sent the below to support over 3 months ago and never got a response. I'm hoping someone here can point me in the right direction and what if any devices sonos sells that I would need to make this work. And if they don't offer what I need, what other company's devices should I look into?This is my desired set up. Unsure if it is possible.:I live in a 3 story home. I have a wired turntable with its own phono pre-amp (among other audio devices) which live on the 2nd floor of my home.Taking just the turntable as an example:- I want to be able to listen to that turntable on the 1st floor of my home.- It is not feasible for me to run physical speaker wires from the 2nd floor down to the 1st floor. I also don’t think a Bluetooth signal will pass reliably from the 2nd floor down to the 1st floor (but maybe it would?). If Bluetooth wouldn't work/be reliable, then I'd be looking specifically for a WiFi solution.- In other wor

Ive just installed a new Sonos Amp. Ive used the Sonos App on IOS to install it and all works ok. Then the app trys to register the amp on my Sonos account and I get an error saying cant connect try later. I have checked my Sonos account and logged in and updated my address and password all seems ok. Any ideas please. Thanks