Show off your setup or get inspired by others
Recently active
I own Sonos Arc + Sub (Gen 3) + 2 Sonos One products connected to newly bought Apple TV 4K via HDfury Arcana as my Samsung TV doesn't have eArc. I'm able to get Dolby ATMOS on it's supported latest movies i.e. TENET from streaming apps. But the issue I have is for Non ATMOS movies. I set audio HDMT output as Auto with Dolby ATMOS in my Apple TV. So movies with Dolby Digital Plus (DD+) 5.1 audio format, I get Multichannel PCM 5.1 instead of Dolby Digital Plus (DD+) 5.1 in my Sonos Arc. The Multichannel PCM 5.1 is softer than Dolby Digital Plus (DD+) 5.1 and the sound is not great. Hence I would like to check if the sound can be better in Sonos Arc for DD+ 5.1 audio content movies? thanks
I recently installed a Sonos Beam to my Sony Bravia/Apple TV system via typical HDMIs. I set it up to control the operation and volume using the Apple TV (ATV) remote and it worked as expected: moved around the streaming apps and controlled the volume nicely with the ATV remote. However, after watching a show or changing to another app, the ATV remote could not adjust the volume up or down. I could move around apps but could not control volume. I double checked the settings in the APT and all ok: Audio Format - Auto, Volume Control - Auto via IR (TV). I tried switching to Sound Bar via IR and did not fix it. I thought it had to do with the TV which is an old Sony Bravia (10-12 old?) but used the ATV/remote with the previous 5.1 setup (good ol’ receiver, DVR, speakers, SW). The only time I will get a small window to control the volume is when turned the whole system off (TV, APT, Beam) for a couple of seconds. When back up, all would run ok but will loose the volume control abo
Once S2 is released, will I still be able to buy new speakers and add them to a legacy system? I know that every time I add a new speaker to my existing system, it forces me to update every controller and speaker to the latest version before bringing the new speaker online. (That’s how I lost the ability to use old controllers, even though we don’t use any features that weren’t there 10 years ago.) It would cost thousands to replace my legacy speakers (that are still working well), and our most common usage case is “party mode” with everything linked together and in sync, so a split system is not appealing. We’ve been working our way through the facility, buying another speaker every six months. Do I have to hurry up and buy the rest of the rooms before June?
It has taken me many hours to figure out from intense Googling that the reason Sonos won’t include certain songs from my itunes playlists is that these particular songs are protected (m4p). I have been all over the internet looking for a free tool to convert them. I already own these songs...I don’t think I should have to pay more $ to convert them. I don’t have very many songs with this issue.Can you help?Thanks in advance.
Hello. Maybe this can be useful for more people using Apple Music lossless via Airplay 2. I listen to my music with Sound check > ON - all the time, but I noticed that the sound from Apple Music is not so clear as the sound from Tidal integration in the Sonos app. By clear, I mean not so bright highs, not so defined lower frequencies, and also mids. Well, not anymore. After applying in the Settings > Music > Sound check > Off AND Settings > Music > Dolby Atmos > Off (if it was on Automatic, or On) The sound will immediately pop-up, as it should. (The change of Dolby Atmos settings is important here, because turning Sound check On or Off will not change the setting immediately). I was surprised how the change is audible on my basic speakers. My setup: iPad 2019Ikea Bookshelf Symfonisk after Trueplay calibration in the stereo pair Tested with several records - Abbey Road from The Beatles, Diana Ross, etc. All in Lossless, or Hi-Res Lossless. Now, there is an
Sonos v2 connect not working? Well I thought mine was either faulty or otherwise completely bricked. It would not reset. There was no green light, however hard I tried to reset it.I disconnected reconnected via Ethernet to my router. I pressed the play and vol+ buttons a few times. Eventually the Sonos app picked it up, but again still not working , I had to give it a few goes. Eventually the Sonos app picked it up successfully. Whilst the Sonos connect device didn’t appear in the app as a registered device, the app then indicated it was performing an update. All my other Sonos products subsequently disappeared from the app as my registered devices. I left it 5 mins then the Sonos app prompt me to disconnect power from the connect, which I did , I then reattach to power whilst still connected to Ethernet and the app indicated it was continuing with the update and setup process. I subsequently had to rename it, as if from new. The app eventually then started to show all my other Sono
My sonos app on my iPhone has betone very aloe to start up and find my speakers. The same for everyone in the family. Have tried to delete and reinstall App and reset all speakers and set up as new. Still the same. seems to have started since last update.
I see this topic has been raised before but never really answered as far as I can see. I recently bought a Sonos AMP for playing TV sound through my good speakers. I connected the AMP to the speakers, and played some spotify music, it works. I then connected the TV to the AMP using the HDMI ARC port on the samsung tv, and played some netflix using the samsung app, and it worked. But next day it was not working anymore. It took a lot of debugging, but I think I found the pattern:I use the TV only with built-in apps like Netflix and with Chromecast. As soon as I use Chromecast as tv input, the HDMI ARC connection is lost, and it does not return if I go back to Netflix. Only way to restore the connection is to remove power from tv and remove hdmi cable, switch on TV with TV sound, put in HDMI cable and select HDMI ARC output in TV settings. Obviously this process defeats the point of having a Sonos AMP in the first place, I could use any stereo amplifier with optical input and get better
I don’t have any compatible airplay devices yet today my Sonos content which I’ve started from the Sonos app randomly shows up in lock screen with full volume control. Did I miss an update or am I stupid?
Hi,Recently bought Sonos SUB Gen 3, paired with Playbase. Seems Sub boots slow compare to Playbase.Sonos Sub shows white solid led glowing and iOS app shows Playbase + ?. This happens for few seconds then it detects. Anybody facing this issues? Any solution?Is this issue or Sonos Sub booting takes more time?
I will be connecting a turn table to the Sonos amp in my basement. I have two floor standing speakers there. I was hoping to wire two passive bookshelf speakers in a different room (upstairs, formal living room) to the Sonos amp as wellto get that analog sound in a different room.It would be ideal to adjust the volume separately for two bookshelf speakers in the other room without affecting the basement speakers. I have read some about line level controller or connecting a mixer two the speaker wires then to the bookshelf speakers. I suppose even connecting a Sonos port would give me that control, but that is getting pretty expensive. I am even considering unplugging the speakers when we do not want them on upstairs. Let me know if anyone has any suggestions.
So I’ve recently bought a new TV and am finding the speakers pretty rubbish. I was looking at getting a Sonos product however am now torn between getting just the Arc or a Beam and adding two Ones to go along with it. Does Dolby Atmos really make that much of a difference that it can outshine two surround speakers?
I recently got a Sonos Roam and integrated into my system (which up until I purchased the Roam was an S1 system). It should be noted that the Roam -- at least for purposes of this post -- is constantly plugged in. And for the most part, the Roam has been working okay, but I have continually had to deal with one glitch:I group the Roam and some other speaker in my house. I play music and the music plays on all speakers. I pause the music or stop music for some period of time (more than a few minutes). I play music in the group again and the app appears to show all speakers playing music, but no sound is coming out of the Roam.This has happened repeatedly. It is a fairly easy fix: I can ungroup the Roam and then re-group it and it will start to play again. But obviously, that isn’t how the system is supposed to work. Is anyone else having this issue or have any idea how to fix it?
Hi everyone,I was trying to check whether the newly-introduced Spatial Audio (Dolby Atmos?) would work on my Roam via my iPhone 12 (bluetooth) or not, and it was buggy (i.e., music did not start, or just play a few seconds, perhaps loading?). Beyond that, I also had streaming issues with what I believe were normal songs in Apple Music (no lossless).Any comparable experience, explanation, or fix?ThanksDan
Hi,Is it possible to connect roam to a bluetooth projector. I have a setup with a Xbox Series S, a bluetooth projector with BT 5.0 and a roam. I have tried connecting the roam to the projector which connects but there is no sound. Any suggestions?
Hi All,I just grabbed an Arc, and set it up the other day and the audio was noticeably out of sync while watching Netflix. I tried adjusting the delay setting in the app, but nothing helped. I'm using a Sony Bravia X800H, and I'm connected to the ARC port since there's no eARC. I’ve been trying to figure this out few a few days now. And there’s no AV sync option on my tv. At least I can’t find it. Any advice? I’m thinking of returning it.
Apple Music is now offering dolby atmos sound. Will this sound be available when you have added the Apple Music service in the Sonos app, or is it only available through an Apple TV device?
I'm really struggling to use roam as a Bluetooth speaker. Spotify isn't a problem, but I can't get other media such as bbc sounds app or prime video to play through the speaker. I'm using a huawei Android phone, so airplay isn't an option. Any thoughts or solutions much appreciated! Cheers!
After studying the various posts on here regarding the blown power supply problem with the Play 3 device, I am now at the point where I need some assistance with voltages.I think I have the board operational again, but the voltages I am seeing on the capacitors on the low voltage (output) side don’t look right.For someone who has one of these units and is technically competent, could you please measure what’s on the pins of the power supply board output connector (left to right with the board upright) and post here. This will assist me in getting the supply running correctly and determining what else is wrong with it.In repairing it I had to Dremel away quite a bit of burned area and I may have removed a connection to the regulation side of the supply.If I can get it working properly again then I may be able to assist others who have ended up with a dead power board.
Why tidal play Dolby atmos on my arc with my google chrome device but not Apple Music with my Apple TV ?
I get that you’re proud of the commercial-free Sonos Radio HD and you want people to know about it, but in just a day of activating my subscription and listening to it, I’ve noticed the “This is Sonos” and “You're listening to <station name>” announcement interruption an excessive number of times. Please… I’m paying for it! Please stop. Once every two-three hours maybe at the most. But I think I’m hearing it like once every 15-20 minutes or something.I pay for Spotify; no announcements. I pay for Apple Music; no announcements.
I can’t find the specific answer to my issue. Can both inputs on the Sonos Beam ARC and Optical be plugged in at the same time and used for separate sources or does one cancel out the other? Cheers.
Hi all,I’ve seen a number of threads around this (quite old) but can’t figure it out.Is there a way of adding 320kbps streams of BBC Radio stations on to Sonos?I assume the standard TuneIN and Sonos Radio streams are all at 128kbps?Thanks!
Hey all, I got a request to make:Wouldn't TV dialog sync would be much more reasonably placed if it was in the main UI as seen in the screenshot below? Either here or at least under the 3-dot (setting) section. Why is it much more reasonable? In one word: usability.In a couple: Think of the feature's use-case.I, for instance, have several products which I use: Xbox, Native TV apps and a streamer. Some apps require me to use the TV dialog sync, which requires searching for the settings and clicking through a minimum of 4 menus, with some scrolling thats involved. That's not very convenient when you're already bothered by the off sync and care to enjoy the content you're watching asap. Also, adding it to the Widget so it will be only one click away might also be awesome.Hope this can be considered and prioritized. If you read this, please respond and add your feedback or just reply with "+1". Perhaps we, as a community, could help to make the change by showing the value this would add to
I bought an ARC + SUB + SONOS SL. And I’m super impressed, the sound is so clear and so crisp, I really love it. I think it would be great tough, if SONOS will implement the possibility to use additional SONOS SL as front speaker, in addition to the arc (that woull be than more a center atmos speaker), this would help to wide the fron sound stage, and will sound stellar!
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.